New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Kingduino Uno R3 de Microcontroller Compatible - Atmel ATmega328

Kingduino Uno R3 de Microcontroller Compatible - Atmel ATmega328

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

10,20 €
Statut:
En stock.
Poids
75 g
SKU:
381000030
WANT FREE SHIPPING? Click here to find out more!

L'Arduino Uno est une carte microcontrôleur basée sur le ATmega328. Il dispose de 14 broches numériques d'entrée / sortie (dont 6 peuvent être utilisées comme sorties PWM), 6 entrées analogiques, un oscillateur à quartz 16 MHz, une connexion USB, une prise d'alimentation, d'une embase ICSP et un bouton de réinitialisation. Il contient tout le nécessaire pour soutenir le microcontrôleur; simplement le connecter à un ordinateur avec un câble USB ou de la puissance avec un adaptateur ou d'une batterie AC-DC pour commencer.

Le Uno se distingue de toutes les cartes précédentes en ce qu'elle n'utilise la puce FTDI USB-série pilote. Au lieu de cela, il dispose de la Atmega16U2 (Atmega8U2 jusqu'à la version R2) programmé comme un convertisseur USB-série.

Révision 2 de la carte Uno possède une résistance en tirant la ligne 8U2 HWB au sol, ce qui rend plus facile à mettre en mode DFU.

Révision 3 du conseil d' administration a les nouvelles fonctionnalités suivantes:
1.0 brochage: SDA ajoutée et les broches SCL qui sont à proximité de la broche AREF et deux autres nouvelles broches placées à proximité de la broche RESET, l'IOREF qui permettent aux boucliers d'adaptation à la tension fournie par le conseil d'administration. Dans l'avenir, les boucliers seront compatibles aussi bien avec les cartes qui utilisent l'AVR, (qui fonctionne @ 5V) et avec l'Arduino Due qui opèrent @ 3,3V. Le second est une broche non connectée, qui est réservé pour des fins futures.


* Note:
Ce ne sont pas un produit original de marque Arduino, il est fabriqué avec les mêmes composants et fonctionnalités par un autre fabricant.


Spécifications:
Microcontroller: ATmega328
Tension de fonctionnement: 5V
Tension d'entrée (recommandé): 7-12
Tension d' entrée (limites): 6-20V
Digital I / O Pins: 14 (dont 6 fournissent la sortie PWM)
Pins d'entrée analogique: 6
DC Courant par I O Pin /: 40 mA
Courant DC pour 3.3V Pin: 50 mA
Mémoire Flash: 32 Ko (ATmega328) dont 0,5 KB utilisé par bootloader
SRAM: 2 KB (ATmega328)
EEPROM: 1 KB (ATmega328)
Vitesse d'horloge: 16MHz

Comprend:
carte 1 x Arduino Uno R3 Microcontroller
1 x câble USB

  • UGS 381000030
  • Brand -
  • Capacité ( mAh ) -
  • Poids (g) 75.00
  • Longueur 150.00
  • Largeur 25.00
  • la taille 110.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Well not much to say about this board it is Fantastic had just a bit of trouble to get it to run at first but that was do to me needing to up-date the IDE for Arduino I have the Nano, Mega and they are just as awesome I since have read a bit about how to tell a clone from the original the first two boards if you looked close at a Ardunio then at the clone you could spot a few different mainly the values that are used in the component's (16v Adruino clone has 25v ele caps)BUT this board looking at a original and then the clone I CAN NOT spot one different between the two!! Totally blown away ALL the same component's printing silk screen same part numbers If I didn't know better I would say the messed up and sent a ORIGINAL !!! lol Very Pleased to say the least works just as good a original! to bad they are all gone again GREAT JOB HK !!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well not much to say about this board it is Fantastic had just a bit of trouble to get it to run at first but that was do to me needing to up-date the IDE for Arduino I have the Nano, Mega and they are just as awesome I since have read a bit about how to tell a clone from the original the first two boards if you looked close at a Ardunio then at the clone you could spot a few different mainly the values that are used in the component's (16v Adruino clone has 25v ele caps)BUT this board looking at a original and then the clone I CAN NOT spot one different between the two!! Totally blown away ALL the same component's printing silk screen same part numbers If I didn't know better I would say the messed up and sent a ORIGINAL !!! lol Very Pleased to say the least works just as good a original! to bad they are all gone again GREAT JOB HK !!!!

Excelente calidad en la fabricacion lo recomiendo ampliamente

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelente calidad en la fabricacion lo recomiendo ampliamente

not the orginal Arduino but bootloader is preinstalled and all works fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

not the orginal Arduino but bootloader is preinstalled and all works fine.

Arduino... novos desafios, vamos l!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arduino... novos desafios, vamos l!

Good quality, tried some programs and works really fine, with good response time to load sketchs. Sensor shields v5 fits fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality, tried some programs and works really fine, with good response time to load sketchs. Sensor shields v5 fits fine.

works great, just like the genuine version.
the PCB, soldering and the overal build quality are good also

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works great, just like the genuine version.
the PCB, soldering and the overal build quality are good also

I just received 4 of these arduino boards from Hobby King. The 3.3V output on all of them is a fail. It ranges from 1.7V to 3.2V. Not usable if you plan on using 3.3V as a reference or to power sensors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just received 4 of these arduino boards from Hobby King. The 3.3V output on all of them is a fail. It ranges from 1.7V to 3.2V. Not usable if you plan on using 3.3V as a reference or to power sensors.

Customer files
921137919X677897X37.jpg Download [16]
921137919X677897X43.png Download [2]
921137919X677897X59.png Download [11]
sensorshield Download [184]
arduandjoy Download [189]
sensorsheld Download [56]
sensorshieldpinouts Download [153]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save