S'inscrire

Product Finder

Options

Useful links

 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global

KS-SERVO 8ch FrSky ACCST Récepteur Compatible

KS-SERVO 8ch FrSky ACCST Récepteur Compatible

QTY:

Now save enregistrer 0,00 € 0,00 €

10,82 €
Rating:
Stock:
Poids
16 g
SKU:
458000003-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Description
du

Le AC810 par KS-Servo est un récepteur compatible 8 canal FrSky qui est petit, léger et très abordable.

Pefect pour les petits modèles où garder le poids volant vers le bas est critique, cet appareil ne pèse 4.9g.

Caractéristiques:
• Compatible avec FrSky ACCST
• Compatible avec x9d (Plus) DJT / DFT / DHT
• Petit et léger

Spécifications:
Sortie: PPM
Nombre de voies: 8
Portée: Environ 800
Poids: 4.9g
Dimensions: 23 x 30mm

Comprend:
8 Récepteur Channel
bind Branchez
Instructions

Product
Specifications

Informations supplémentaires

  • Référence:
    458000003-0
  • Brand:
    Non communiqué
  • Poids (g)
    16.00
  • Longueur
    80.00
  • Largeur:
    7.00
  • Taille:
    65.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Got first one. Transmitter is a DJT. Binding like Midelic described on https://www.rcgroups.com/forums/showpost.php?p=35693607&postcount=3069 and all I could get was small bursts of control. Allso the board looked corroded. After a LOT of tries, I finally gave up. HK send me a replacement. Same thing. Tested with new FW FrskyRx_F801_TELEMETRY_PFS_SBUS_071016.hex and it has worked! Flashed the old one and it has worked also.
Quality
Value
Overall
Quality
Value
Overall
I bought this receiver and also an AC410. Neither will bind to my Taranis. I am not a newbie and do know how to bind them. Both Receivers got too hot to touch. All polarities were correct. D8 mode selected. I think I have wasted my money.
Quality
Value
Overall
Quality
Value
Overall
Good receiver, Just keep in mind that the failsafe es pre set to CH3 cut, always connect your motor to CH3
Quality
Value
Overall
Quality
Value
Overall
This receiver is a very bad product! It binded without problem with my Taranis. But the next time I tried to use it, there was no reaction and the components were so burning hot that I could not hold the receiver in the palm of my hand. Obviously poor QC and/or low grade components. Save you money and buy a hardly more expensive real FRSky product. This one is just good enough for the recycle bin :(
Quality
Value
Overall
Quality
Value
Overall
I have now checked three of these receivers and all react in the same way to loss of radio signal - after initialising throttle down and rudder neutral then channels 3 and 4 both go to 2000 mS ie full swing meaning for most set ups the Motor goes full speed and the rudder hard over!!! Seems to indicate bad firmware to cause this very DANGEROUS situation that could cause both model and personal injury.

This has been reported to HK several days ago.
Quality
Value
Overall
Quality
Value
Overall
Beware - This Rx has fail safe only on channel 3 on the assumption that channel is the motor!!! (I fly with motor on channel 4 and motor goes to full power not only on signal loss but sometimes for no special reason!!! Very dangerous not to have all channels capable as failsafe. I will not buy any more until this feature is corrected.
Quality
Value
Overall
Quality
Value
Overall
i tested this receiver with a power of a controller and it does not work . the minimum of the power to this receiver is 6V . Even you can't bind it ....sure.
Quality
Value
Overall
Quality
Value
Overall
I test this reciever whith Taranis yesterday. Excellent product , smooth answer of servo and very good range in flight on my test plane.Easy binding connecting signal pins 1&2 , Taranis config: D8 ch 1-4
I recommend this reciever
Quality
Value
Overall
Quality
Value
Overall
Test flown at last ground range at full power from DFT module in excess of 150M(length of field). Airborne at height near out of sight with large E-glider
Quality
Value
Overall
Quality
Value
Overall
Good well made Rx which is very small and light. No chance as yet to flight test but ground range seems OK. I must emphasize that D8 must be available in your Module or Taranis Tx for this Rx to work. There is an issue with some EU firmware that prevents D8 showing as an option and you will need to visit Utube(search for Drone.biz) for videos and info to fix this.
Quality
Value
Overall
View all reviews
Upload
Videos
  • Telemetry demo.

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.