New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Laser230 Kit Composite Quadcopter FPV (de 230mm)

Laser230 Kit Composite Quadcopter FPV (de 230mm)

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

20,90 €
Statut:
En stock.
Poids
247 g
SKU:
366000017-0
WANT FREE SHIPPING? Click here to find out more!

Le Laser230 est un tout composite construction 230mm arbre étreindre course FPV quadcopter. Le Laser230 a ce qu'on appelle un système propre et sale, qui utilise cosses de vibrations pour isoler le moteur et prop vibrations du FC et la caméra. Le système Clean-and-Sale vous permet de courir plus serré PID et une session gello de fpv vidéo gratuit.

Le moteur de support de bras de montage de l'espacement des 16x19mm et 12mm. La taille de la prop max est 5inch et parfait pour les moteurs 1704 ~ 2206 de classe. La construction composite durable est livré avec de nombreuses dispositions pour le montage et les sangles, ce qui rend l'installation d'un composant logiciel enfichable. Le cadre a 8 cosses de vibration pour l'isolement ainsi qu'une nouvelle caméra FPV prospective montent entre les cadres. Le Laser230 a quelques regards lisses avec écarteurs rouge en aluminium anodisé chauds et un fini mat cool, ce qui en fait un grand petit quad zip autour de votre site de vol local.

Caractéristiques:
• Construction Composite
• Une large gamme de moteurs et de puissance d'options
• Grand cadre d'isolation des vibrations secondaire pour plus d'espace et plus facile la mise en page
• Taille compacte pour la proximité de vol autour des obstacles

Spécifications:
Empattement: 230mm
Poids: 180g
Taille: 82mm avec le train d'atterrissage et le centre cage

Obligatoire:
4 x Motors 1506 ~ 2208
1 x Batterie 800 ~ 1300mah 7.4 ~ 11.1V (2 ou 3 cellules LiPoly)
4 x Hélices jusqu'à 5in
4 x ESC de 7 ~ 12A
contrôleur de vol multi-rotor 1 x
la radio 4ch (6ch recommandé pour FPV et le FC utilisation)
engrenage FPV (en option)

  • UGS 366000017-0
  • Brand Unknown
  • Capacité ( mAh ) -
  • Poids (g) 247.00
  • Longueur 210.00
  • Largeur 30.00
  • la taille 100.00
  • FPV250 Low Hung
  • Added heli landing gear to offer the battery some protection.
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

good frame for the price. flies well but a bit heavy (180g)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good frame for the price. flies well but a bit heavy (180g)

Frame seems sturdy for composite structure and leaves some room for modification. However 5" propose are very tight fits, don't think you can put 6" somehow on this thing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Frame seems sturdy for composite structure and leaves some room for modification. However 5" propose are very tight fits, don't think you can put 6" somehow on this thing.

Not a bad frame at all, great price too. There is no instructions but, it is really straightforward. I am concerned about the arm mounts at it is only 2 screws holding it, may break the arm in a crash. I have not seen any replacement parts for this one anywhere.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not a bad frame at all, great price too. There is no instructions but, it is really straightforward. I am concerned about the arm mounts at it is only 2 screws holding it, may break the arm in a crash. I have not seen any replacement parts for this one anywhere.

Excellent frame. No complaints at all. Highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent frame. No complaints at all. Highly recommended.

Okay, This frame is cheap and looks good. But out of 2 sets of motors only one fits. spacing on mounts fit multistars but not emax. 1806 motors cant Clear the bottom plate of the frame while on flight. i would not get this again i enjoy my fov250 and Qav 250 more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Okay, This frame is cheap and looks good. But out of 2 sets of motors only one fits. spacing on mounts fit multistars but not emax. 1806 motors cant Clear the bottom plate of the frame while on flight. i would not get this again i enjoy my fov250 and Qav 250 more.

Good value and quality is nice however the clean/dirty design is a fatal weakness. Any minor crash results in separation of the two parts which will likely snap a few of the ESC wires too.

Nice idea but I'm going to replace the frame with a carbon mini-blackout clone.

As a side note mine weighed in at 550g with 3S2200mah and FPV gear (but no gopro/mobius). Feels a bit slugish with 1806-2300kv.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good value and quality is nice however the clean/dirty design is a fatal weakness. Any minor crash results in separation of the two parts which will likely snap a few of the ESC wires too.

Nice idea but I'm going to replace the frame with a carbon mini-blackout clone.

As a side note mine weighed in at 550g with 3S2200mah and FPV gear (but no gopro/mobius). Feels a bit slugish with 1806-2300kv.

high quality, nice design.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

high quality, nice design.

Ok bought this to just have something better than the FPV250 sold here with the one solid frame for like 9 bucks. It's a nice frame clean all the bolt holes lines up and lots of hardware to. It is a little heavy but then it's a 4 plate frame, I was able to place my 12amp escs between the botom 2 plates for a nice clean look . The arms are a little weak but not broke them just can bend them some but its a good looking and feels as good as some of my more expensive frames . The rubber grommets holding the bottom fraam to top half are a little soft and loose so make sure use small zip ties to keep it from popping apart on crash or in flight. I placed a CC3d flight board on mine with Sunnysky 2204-16 2300kv motors and 12amp escs 5030 tri props and std props with a Mobus cam and 700tvl fpv camera and 250watt Bosscam transmitter and 1500 25/50c batt total weight loaded is 630 grams. flies 7 minutes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok bought this to just have something better than the FPV250 sold here with the one solid frame for like 9 bucks. It's a nice frame clean all the bolt holes lines up and lots of hardware to. It is a little heavy but then it's a 4 plate frame, I was able to place my 12amp escs between the botom 2 plates for a nice clean look . The arms are a little weak but not broke them just can bend them some but its a good looking and feels as good as some of my more expensive frames . The rubber grommets holding the bottom fraam to top half are a little soft and loose so make sure use small zip ties to keep it from popping apart on crash or in flight. I placed a CC3d flight board on mine with Sunnysky 2204-16 2300kv motors and 12amp escs 5030 tri props and std props with a Mobus cam and 700tvl fpv camera and 250watt Bosscam transmitter and 1500 25/50c batt total weight loaded is 630 grams. flies 7 minutes.

I've bought a Laser230 and I disappointed with it. 5X3 propellers can't fit of this frame the arms are shorter than normal. I made new arms for this but now it looks like a mule. I'm looking for a proper 250 size frame somewhere.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've bought a Laser230 and I disappointed with it. 5X3 propellers can't fit of this frame the arms are shorter than normal. I made new arms for this but now it looks like a mule. I'm looking for a proper 250 size frame somewhere.

The kit is OK and despite the arms being of the same, fairly thin material as the rest, my quad with "Baby Beast" motors and HK carbon 5030 props survived a pretty impressive scratch with no damage at all. The vibration dampening design is a joke though. Make the frame rigid by using nylon bolts & spacers through the 8 bolt holes next to the dampening balls instead or you get crazy shakes. Dampening is only needed for a small camera platform. For the money, it is great choice though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The kit is OK and despite the arms being of the same, fairly thin material as the rest, my quad with "Baby Beast" motors and HK carbon 5030 props survived a pretty impressive scratch with no damage at all. The vibration dampening design is a joke though. Make the frame rigid by using nylon bolts & spacers through the 8 bolt holes next to the dampening balls instead or you get crazy shakes. Dampening is only needed for a small camera platform. For the money, it is great choice though.

  1. 1
  2. 2
Customer files
laser230 pdb Download [1597]
Laser230 RTF Download [1283]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save