-
Description
du -
Le système LED Lumifly Thin-bande peut être attaché à un avion ou un hélicoptère. Alimenté par une batterie de LiPoly 2S, le conducteur mince bande peut alimenter un nombre presque illimité de bandes de LED. Les bandes peuvent être connectés en série pour former plus bandes pour des avions plus gros.
Les lumières de profil ultra bas montés sur la carte flexible rendent l'installation sur votre avion ou héli une tâche simple, et les installations externes ne seront pas affecter les performances de vol.Inclus:Pilote 1pc système LEDbandes de LED (4 x 50cm)Splitter 1pcCommutateur 1pc -
Product
Specifications -
Informations supplémentaires
-
Référence:
LUM-TH-SYS
-
Brand:
Non communiqué
-
Capacité ( mAh )
Non
-
Poids (g)
58.00
-
Longueur:
141.00
-
Largeur:
20.00
-
Taille
120.00
-
Référence:
-
Community
Discussions -
-
Rate&
Review -
These are not too bad, they are okay. I wouldn't recommend them though, I think you would be better off using the "Turnigy High Density R/C LED Flexible Strips". Although these are quite convenient (they have their own power, they are not high-density. If you are using a 3 cell Lipo (and who isn't) then you're better off using the Turnigy strips and connecting them directly to your battery connector. This is okay, but you'll get better lighting and better value for money from the Turnigy strips.Not the cheapest LEDS but gets the work done in the simplest way. My very first night-flight went up on this. Very good n bright n simple to setup. 2 or 3cells. NICE!good for the money, too many in row aint advisableVery good product!
Tested with Futaba receiver battery, it worked perfectly.
I recommend
-=-
Produto muito bom!!
Testado com bateria do receptor Futaba, funcionou perfeitamente.
Recomendogood package, perfect quality. nothing against!Works Great ,Verry bright on a 2s Lipo ....This is another great product!!! Tip: if you install these on a wing and want the outermost LEDs to be nav lights, try mixing thin CA and red/green food coloring. Mix the two quickly till well blended then using a toothpick dab all over the LED(s) you want to co our. Be quick because the food coloring activates the glue. This works extremely well but note that it is a PERMANENT change. Happy Landings !It has a JST power connector. if you would use for power your receiver pack then needs a Y cable or different connector to use receiver ports.super en 3s mais pas terrible en 2s! -
Upload
Videos -
Upload
Files -
Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!
Others Also Bought
JST-XH à JST LED Power Dist...
Special Price
You save 0,05 €
Prix normal
