New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

M2x100mm en acier inoxydable Rods Push (LH & RH Threaded) (10pcs)

M2x100mm en acier inoxydable Rods Push (LH & RH Threaded) (10pcs)

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

4,92 €
Statut:
En stock.
SKU:
450000356-0
WANT FREE SHIPPING? Click here to find out more!

Cette tringlerie est à gauche filetée d'un côté, et la main droite vissé sur l'autre. Cela vous permet d'ajuster la longueur de la biellette facilement.

Spec .:
Diamètre: M2
Longueur totale: 100mm
Poids: 1.8g

  • UGS 450000356-0
  • Brand -
  • Capacité ( mAh ) -
  • Poids 23.0000
  • Longueur 100.00
  • Largeur 10.00
  • la taille 10.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The above is not quite true, the rod is 1.7mm but it is a rolled thread. The thread itself is a perfect M2 i.e. M2 nuts fit perfectly. However the majority of clevises and ball joints are not made for M2 threads but for M2 bar with a rolled thread on it which is actually 2.2 mm. If you want ball joints to fit these then you need 017000162 or an equivalent, they fit oerfectly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The above is not quite true, the rod is 1.7mm but it is a rolled thread. The thread itself is a perfect M2 i.e. M2 nuts fit perfectly. However the majority of clevises and ball joints are not made for M2 threads but for M2 bar with a rolled thread on it which is actually 2.2 mm. If you want ball joints to fit these then you need 017000162 or an equivalent, they fit oerfectly.

Quick note: these are 1.7mm and not true 2.0mm. M2 nuts will fit but if like me you intend to use them as propeller shaft (for a micro boat) or as pivot pins in 2mm bushings or bearings they're going to be a little loose.

Aside from that, stainless steel as advertised, normal thread on one end, reverse thread on the other end. Quality gets only 3 stars because of the dimension issue.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quick note: these are 1.7mm and not true 2.0mm. M2 nuts will fit but if like me you intend to use them as propeller shaft (for a micro boat) or as pivot pins in 2mm bushings or bearings they're going to be a little loose.

Aside from that, stainless steel as advertised, normal thread on one end, reverse thread on the other end. Quality gets only 3 stars because of the dimension issue.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!