Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Matek PDB-XPW w/ Current Sensor 140A and Dual BEC (5V and 12V)

Generating Links

Matek PDB-XPW w/ Current Sensor 140A and Dual BEC (5V and 12V)

Prix:

Now save économisez 0,00 € 0,00 €

6,45 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
090000030-0
Livraison gratuite? Cliquez ici pour apprendre plus!

The Matek PDB-XPW is a power distribution board with punch and is designed for X frames. It will take input from 3S to 5S Lipo batteries which are ideal for Racing Drones. Power is provided to four ESCs and it is regulated and synchronized 5V DC and linear regulated 12V DC for all your gear such as Flight Controllers, cameras, video transmitters, RC receivers, LEDs, etc.

 

It also has built-in 140A current module and offers an XT60PW socket to connect the LiPo pack conveniently. The PDB fits into typical 30.5x30.5mm tower mounts and has large solder tabs making it easy to install in your drone.

 

Features:
• 2oz copper, 4-layers & 2mm PCB
• Built-in current sensor 140A
• Built-in XT60PW Socket
• Total 4 pairs ESC solder tabs are fit for X type frame
• 5V and 12V Output LED indicators and short circuit tolerant
• 5V BEC for RC Receivers, Flight controllers, OSD, and Servos
• 12V BEC for Video TX or FPV camera with linear regulator

 

Specs:
General:
Input voltage range (3S-5S LiPo operation): 9 - 21V DC
PDB: 4 x 35A
Regulated 5V and 12V outputs
Current module: 140A, 3.3V ADC
LED power indicators (5V & 12V outputs)
BEC 5V output:
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant: 5 seconds/minute
BEC 12V output:
The battery should be 4~5S LiPo (13~21V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant: 2 seconds/minute
BEC 12V @ 3S LiPo
Output voltage= 3S LiPo voltage -1.5V
Physical:
Mounting: 30.5 x 30.5mm, Φ3mm
Dimensions: 36 x 50 x 4 mm (w/o XT60PW), 36 x 58 X10.5mm (w/ XT60PW)
Weight: 8.5g (w/o XT60PW), 13g (w/ XT60PW) 

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

DB | Acheteur vérifié

  • Overall
  • Quality
  • Value

Fantastic PDB

Feb 17, 2019

I've abused the heck out of this little PDB, shorted it so many times on accident, and it doesn't care. It just keeps on delivering. I don't think I could find a better PDB for the price anywhere. Love this little board.

Daniel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Top zufrieden

Nov 18, 2017

Günstig, und tut was es soll

Chris | Acheteur vérifié

  • Overall
  • Quality
  • Value

Excellent PDB

May 24, 2017

I really like this PDB. It has pads for running the signal wire from the ESCs to the FC. An excellent time and space saver. Excellent engineering. I have been impressed with all of the Matek products i have seen so far.

Fichiers clients
Matek PDB-XPW Manual Download [11]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!