Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Micro Spitfire w / 5A ESC, BL-moteur, 2.5g Servo & LiPo

Generating Links

Micro Spitfire w / 5A ESC, BL-moteur, 2.5g Servo & LiPo

Prix:

Now save économisez 0,00 € 0,00 €

29,16 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
MicroSpitfire
Livraison gratuite? Cliquez ici pour apprendre plus!
Le micro Spitfire est de 90% pré-construit et comprend le moteur, ESC, batterie LiPo et servos.
Vous aurez besoin d'environ 2 heures pour compléter ce plan et seulement besoin d'inclure votre propre récepteur.
Caractéristiques:
Longueur: 460mm
Envergure: 510mm
Poids en vol: 90-100g
Moteur: C10 Brushless outrunner
ESC: 5A / 2S
Prop: 4 pouces
Servos: 2x2.5g
Batterie: 7.4V 2S 200mAh Lipo
Obligatoire:
Votre propre TX & RX
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Client | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 18, 2010

Arrived very fast. Don't think I would call it 90% built though. Assembly was quite easy even though the instructions were the usual waste of paper. If built straight from the box the dihedral is a bit much and the weight distribution is quite tail heavy. Anyone know the cg? I couldn't find it on the "instructions". Looks good finished but I haven't had time to maiden it yet due to bad weather. Looking forward to sorting it out.

Spaui | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 07, 2010

I really love this plane now that I have made some essential mods and tuned it. Since it is small and light it makes it a challenge to fly it nice and stable but sure looks good when making low passes! See my video on canopy, dihedral, and aileron mods: http://www.youtube.com/watch?v=6HIhb9HvWjY

Real Gambler | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 07, 2010

With a 5030 and 360mah Rhino battery, I get just a little bit less than 30Watts at about 4 amps. Netheir the motor or ESC seem to mind after 7 flights. Don't know if they run hot (unaccessible) The motor could likely use a few ventilation holes. It doesn't fly too good inverted (again, too much dihedral). VERY FAST with the mod (Did it before second flight, didn't like the look of the 4025, as it looked too small for the plane)

Real Gambler | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 07, 2010

5 Stars because you get a C10 motor, servos and ESC so basically the plane/foam is free.



Original battery: 13.3 gr

Prop: look like a 4025

Plane ready to fly: 92.7 gr

Con: Too much dihedral.Slightly under power for it's weight with original battery and propeller. No adapter for my AR6300. Need to land under power but not done tweaking (only 7 flights)



Modifications: 5030 prop and 360mah Rhino



Pro: With the mods, this plane fly great and FAST



Petr | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 09, 2010

Super, hello HobbyKing, please add in this micro size full 3D acrobat (etc. Extra 260 or secoond). Thanks, Petr

Fichiers clients
No File Name Download [182]
No File Name Download [148]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!