S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

MicroPower & DataRecorder Capteur RPM

MicroPower & DataRecorder Capteur RPM

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
9 g
SKU:
RPM-KIT-MAG
Description
du

MicroPower & DataRecorder Capteur RPM

Salle Effets capteur RPM avec 4 aimants (RPM-KIT-MAG)
Mesures RPM à 50K +. Voir le manuel d'instructions de MicroPower pour plus de détails sur la façon d'utiliser le capteur RPM Hall.

Pour plus d'informations, cliquez ci-dessous;
http://www.eagletreesystems.com/MicroPower/micro.htm

Product
Specifications

Informations supplémentaires

  • Référence:
    RPM-KIT-MAG
  • Brand:
    Non
  • Capacité ( mAh )
    Non
  • Poids (g)
    9.00
  • Longueur:
    133.00
  • Largeur:
    3.00
  • Taille
    99.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Original part for a good price. Thx for this.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great if you're going to fly helis, but it is a bit of a gimick on fix wing IMO. I fly FPV and this just provides me with interesting but useless information about prop speed. What you really need is airspeed and amp draw which you can get from the other eagletree expanders.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The magnets are easy to mount. I use a drill and heat shrink tubing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this installed on my HK450 to check the head speed, There is a spot on the main gear for the magnets already. it works great and I am going to buy more because i am leaving it on the heli full time. thanks

HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
works great on 450 heli's or bigger i drill a small hole on my main gear and glue the magnet to it
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice and cheap :) Could wish for high flexibility silicone wires but its not up to HK but Eagletree.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It needs some good placement and secure fixing, but it will give better reading results than the rpm brushless sensor i had previously.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Make sure that the gap between the magnet and the sensor doesn't exceed 2mm!

Works perfect with the V3 elogger.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
1 point less due to handling:

- Hall probe and magnet have to be within about 2 mm diameter.

- hall probe has to be mounted with the flat side (see picture) directed towards the magnet. That is the shrinking tube of the probe and the cable both have to be near the rotating structure. Especially a bit a problem if the magnets are glued into the corresponding holes of TRex main gears.



Positive: most direct (reliable) measurement of rpm.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this to get rpm info on everything except electric helis. With them, i prefer the brushless motor sensor, which is easier to install on any number of helis.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.