Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Mini Distributeur de puissance DP BEC

Generating Links

Mini Distributeur de puissance DP BEC

Prix:

Now save économisez 0,00 € 0,00 €

75,35 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
373000009-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Min Puissance Distributeur UBEC adapté à 30cc en plus alimentés au gaz modèles.

Cette unité a d'excellentes fonctionnalités, qui comprennent: entrée double batterie, 5v linéaire isolé RX BEC, 20 tension Amp réglable UBEC sur tous les canaux de sortie, 8 canaux RX entrée avec deux sorties sur chaque canal - simplification des surfaces de contrôle double servo.

Grands inclusions sont le régulateur 5V linéaire indépendant fournissant une source d'alimentation séparée pour le récepteur, isolé optiquement puissance CDI et intégré allumage kill à distance. Les sources d'alimentation du récepteur, Servo & CDI sont complètement isolés les uns des autres.

Ceci est le premier système d'alimentation du distributeur de sécurité nid du récepteur au sein de la distribution de puissance 'bloc' raccourcissant ainsi de câbles, en ajoutant une protection à votre récepteur tout importante et excès de vitesse mis en place le temps.

Caractéristiques:
• 5v linéaire RX BEC
• 20 Amp Servo UBEC
• Les utilisateurs de tension UBEC réglable
• 8 (+1) CDI coupe les canaux d'entrée
• 16 canaux de sortie
• 5 vérification de l'état LED
• Bac récepteur rembourré et montage sécurisé
• CDI alimentation isolée
• CDI commande d'allumage à distance (coupe à distance)
• CDI état de l'alimentation voyant
• CDI borne de sortie
• CDI moniteur de tension LED

Facultatif: affichage de la tension d'entrée / sortie avec interrupteur d'alimentation externe

Spec:
Canaux d'entrée: 8 (+1) CDI Cut
Canaux de sortie: 16
Tension d'entrée: 6V-13V
Servo UBEC: 20A (30Amp Burst)
Tension de sortie: 4.8-9.7V (réglable par l' utilisateur; par défaut est 5.2V)
Puissance RX: 5v linéaire bec
Température de fonctionnement: -20 à 85 degrés c
Poids: 80g
Dimensions: 116mm x 88mm x 13mm

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

J.A. | Acheteur vérifié

  • Overall
  • Quality
  • Value

Good, but be careful

Dec 21, 2018

A very nice device. But it involves a potential danger: the 5V power supply to the receiver has only 1A. This is just enough for the receiver and the internal ignition switch. But it is not enough for powering any other device from the receiver. I tried it: already with 1 servo the voltage-drop causes the receiver to stop working. So: DO NOT CONNECT ANY EXTRA DEVICE (Servo, ESC, SBUS Decoder etc.) TO THE RECEIVER!!
But there is a “workaround” if you want to connect additional devices: use the 20A power supply and to achieve that you have to do the following:
- disconnect both (!) red wires from the servo-connectors ;
- take a short female-female Futaba-lead and remove the black (ground) and white (signal) wires completely;
- take, on 1 side, also the red pin out of the connector and put this pin into the middle (!) position of one of the servo connectors;
- put the other side of the servo-lead into one of the (double) servo slots.
I did not cut away the two loose red wires but did put a shrink wrap over the pins. By doing that it is possible to bring the power supply back to its original state eventually.

Douglas | Acheteur vérifié

  • Overall
  • Quality
  • Value

Almost the same as the yellow one.

Oct 17, 2017

The only difference I can see between this one and the yellow one is that this has 20A bec and the yellow has 30A bec. Then why is this more expensive?? I don't know, maybe cuz black is "cooler"..?? Works great for me, dual battery supply, adjustable bec voltage, I set mine to 6v. Easy to set with a simple voltage meter. It would be nice if it had led V display, but that would add more $ and not really neccessary, imho. I will get another for my next 30cc bird, maybe the yellow one, but I don't really need 30A bec!

Jorge | Acheteur vérifié

  • Overall
  • Quality
  • Value

Question

Jan 21, 2017

Excuse my ignorance Which batteries do you recommend for use with 8 standard servos?
Thanks :)

michael | Acheteur vérifié

  • Overall
  • Quality
  • Value

NO MORE POWER PROBLEMS EVER AGIN!!!!!

Dec 15, 2016

i have this ajustable power distributer in all my planes its the CATS MEE-OUH !!! TWINN BATTERY ADJUSTABLE POWER THERE OUT THERE FOR A HECK OF ALOT MORE$$$$$$ LIKE TWICE THIS PRICE. GET ONE AND YOU WILL NEVER HAVE A POWER PROBLEM AGIN !!!! FROM THE AVIATER UNCLE MIKE IN MENDOCINO CALIF

Patrick.Jurek@al | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 13, 2015

Gute Akkuweiche Funktioniert super fr ganz kleines Geld.

Benutze Sie in einer 2,70m Extra mit 10 Servos auf 8,4 Volt

DrifterTR | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 26, 2015

It is the best product for power distribution. Going to use on 1/4 piper cub

Fichiers clients
Altimètre.pdf Download [558]
german manual Download [13]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!