Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Mini Skywalker 840mm ARF

Generating Links

Mini Skywalker 840mm ARF

Prix:

Now save économisez 0,00 € 0,00 €

27,85 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
304000003
Livraison gratuite? Cliquez ici pour apprendre plus!

La force est forte avec celui-ci ...... est donc la mousse EPO, il est fabriqué à partir et le longeron de carbone dans l'aile. Être sous forme de kit, ce petit parkflyer vous permet d'utiliser votre train de puissance préféré et de l'équipement RC, il est très simple construction et le modèle achevé est sûr de donner des heures de parkflying amusant .... Si vous êtes en micro FPV - en un endroit, loin, très loin ..........

Spécifications:
Envergure: 840mm
Longueur: 590mm
Voler Poids: 250g

Comprend:
Autocollants
Matériel

A besoin:
Your Own 4 canaux TX / RX
4 x Sub-Micro Servo
18mm 1700kv Motor
12A ESC w / BEC
Batterie 850mAh 3s Lipoly
5x3 Prop
colle de mousse de sécurité

  • Envergure ( mm ) 840.00
  • Two planes one pilot
  • Two planes one pilot 1st Attempt
  • Mini Skywalker 840mm ARF Update FPV
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

rc flying | Acheteur vérifié

  • Overall
  • Quality
  • Value

Not for beginner

Aug 08, 2018

I bought this kit to my sun, after we install Motor and servo it was impossible to get the CG for the air plane it is very heavy to the rear side with my 15 years of experience in this field.
result it is impossible to fly with it except if you have 10 years of experience so this is not for beginner and better to paid 20 USD more to buy ready to fly aircraft

Jean-Philippe | Acheteur vérifié

  • Overall
  • Quality
  • Value

Very nice for the price

Jun 07, 2018

I make it as a FPV plane,
with a racestar 1806 brusless motor, a 5030 proppler,
12a esc, about 264gr with an firefly micro on it an a 700mah 2s lipo.
Flight well at 1/3 of throttle for a very long time (about 20min ) with this setup.

Mindaugas | Acheteur vérifié

  • Overall
  • Quality
  • Value

Good

Feb 26, 2018

Ok

Max | Acheteur vérifié

  • Overall
  • Quality
  • Value

Tons of fun

Nov 05, 2017

I set my 1st one of these up as a 3 chanel, aileron, elevator and throttle. with a cheap Chinese 2200kv motor using a 3 blade drone propeller and a turnigy 2200mAh 3s battery to get it to balance. This plane climbs vertically at a rate that I have to be careful not to rip the wings off, even on a windy day it flys and glides well. I have given it plenty of punishment but with some hot glue & duct tape it keeps flying. I am glad I bought 4, after learning to fly on the 1st one the next will still be tons of fun and last longer

Michael | Acheteur vérifié

  • Overall
  • Quality
  • Value

Great flyer

Sep 04, 2017

Fantastic little plane. Easy to build, put the servos in wings, didn't worry about the rudder servo as its not really needed. Using DYS 1806 2300kv motor with 5030 3-blade prop and either 2200, 1200 3s. Flies very well with this setup.

Alex | Acheteur vérifié

  • Overall
  • Quality
  • Value

Really good !!

Aug 09, 2017

Great little EPO airplane... It comes more as a kit than ARF, but the quality of the components and of the hardware is awesome for such a price ! Building is straightforward.
The only little cons is that it could be difficult to obtain the CG as the tail needs some renforcement and the motor mount is a bit too much backward (but not a problem if you use FPV equipment in the front)
In flight, the controls are very responding, and it' s very predictable. Lot of fun !

paul | Acheteur vérifié

  • Overall
  • Quality
  • Value

Great mini plane

May 23, 2017

Mini Skywalker is a great little plane easy to build and so much fun to fly

paul | Acheteur vérifié

  • Overall
  • Quality
  • Value

Great mini plane

May 23, 2017

Mini Skywalker is a great little plane easy to build and so much fun to fly

paul | Acheteur vérifié

  • Overall
  • Quality
  • Value

Great mini plane

May 23, 2017

Mini Skywalker is a great little plane easy to build and so much fun to fly

Jason | Acheteur vérifié

  • Overall
  • Quality
  • Value

Nice little plane but not ARF

May 15, 2017

Awesome little plane. Like another reviewer states it's more like a kit rather than ARF. It took me around 3-4 hours to build. I fly mine as a glider/sailplane and it's a lot of fun. My setup weighs in a 9.5 oz (272 grams) but I can fly with a min of ~8-10 knots of wind on a big cliff.

The decals came with red, yellow and black (instead of the blue in the image). I kind of wanted the super-gay rainbow like the pic but not a big deal.

I'm pleasantly surprised by this little plane. I didn't have any expectations for the plane so I'm quite impressed. For the price you really can't beat it.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Fichiers clients
Manual - Mini Skywalker 840mm Download [5045]
Maiden Download [3124]
No File Name Download [530]
FPV install Download [1715]
FPV install 2 Download [1818]
No File Name Download [453]
No File Name Download [481]
No File Name Download [481]
mySkyW Download [297]
mySkyW2 Download [187]
  1. 1
  2. 2
  3. 3
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Related Tags

Accessoires