New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Mini Talon FPV Avion EPO 1300mm (KIT)

Mini Talon FPV Avion EPO 1300mm (KIT)

Discontinued Product

Please continue searching for a similar product.
SKU:
239000002-0
WANT FREE SHIPPING? Click here to find out more!

Le V-queue Drone Mini Talon FPV est le nouveau petit frère du plan Talon FPV populaire. La cellule moulée tout EPO tombe en panne, et en raison de sa petite taille est grande pour l'emballage avec vous sur votre FPV safari préféré. Le kit est livré non assemblé avec l'EPO et laser des pièces de contreplaqué de coupe.

Avec une batterie 4S 14.8V 10,000mAh LiPoly, temps de vol sont longues, et la charge alaire encore faible grâce à la surface de l'aile généreuse du Talon. Un compartiment de fuselage généreux avec grande trappe supérieure vous permet d'accéder à votre équipement FPV et la batterie de vol dans toute configuration que vous choisissez. Il est une toile ouverte pour vos besoins de FPV.

Caractéristiques:
• Kit - Tout l'assemblage et l'équipement installation requise
• cellule Moulé OEB
• montage laser moteur contreplaqué coupé et cadre de la selle de l'aile
• train d'atterrissage protège fond de Mono-trace fuselage
• Grand compartiment de fuselage accueille de nombreuses configurations de batterie et FPV Equipement.
• Deux plug Piece dans les ailes avec tube d'aile de carbone

Spécifications:
Envergure: 1300mm
Longueur: 830mm
Poids en vol: 1000 ~ 2000g
Wing Zone:. 30 sq dm.

A besoin:
Transmetteur Canal 4+ et récepteur w / mélange V-queue
Batterie 4S 14.8V 5000-10000mAh LiPoly
4 x 9g Servos
2814 1000KV Brushless Motor
Contrôle 40A Brushless
hélice 9x4.5

  • UGS 239000002-0
  • Brand -
  • Capacité ( mAh ) -
  • Poids 2490.0000
  • Longueur 880.00
  • Packaging Width 260.00
  • la taille 280.00
  • Mini Talon
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Super avion pour du fpv cool. Avec un apm dessus et une 4s 5000. Le centrage indiqu est parfait. Le lanc et trs facile mais il faut faire attention au couple de l'hlice lors de la mise des gaz. Prvoir un renfort de la pice en bois qui touche l'atterrissage.
Mont avec un plush 40a, moteur 2217 800kv et helice apc sf 10x4.7 a suffit largement.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super avion pour du fpv cool. Avec un apm dessus et une 4s 5000. Le centrage indiqu est parfait. Le lanc et trs facile mais il faut faire attention au couple de l'hlice lors de la mise des gaz. Prvoir un renfort de la pice en bois qui touche l'atterrissage.
Mont avec un plush 40a, moteur 2217 800kv et helice apc sf 10x4.7 a suffit largement.

Not a bad aircraft. Quality is pretty good and it is tough too! Loads of room inside but inconvenient access/battery placement. Need a better system to close top access door and keep it latched. I didn't use v-tail trim and it flew well as a yank and bank. Rear skid section should be redesigned as wooden skid is a weak point. Very fast with the right motor/prop/battery combination. Watch out for roll to the left when launching.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not a bad aircraft. Quality is pretty good and it is tough too! Loads of room inside but inconvenient access/battery placement. Need a better system to close top access door and keep it latched. I didn't use v-tail trim and it flew well as a yank and bank. Rear skid section should be redesigned as wooden skid is a weak point. Very fast with the right motor/prop/battery combination. Watch out for roll to the left when launching.

I can't be happier with this plane.
It was easy to build, all pieces fit perfectly and are really well finished.
One nice detail is that wings can be easily detached and reliably attached using a screw that holds them in their position.
Having watched some videos, I was concerned about landing speed, but actually it does not need much space to land (watch the video).
It is very stable, and with the motor I used (dys 2217 1500kv) taking off is really easy, and it climbs really well.
The only problem I have found so far is the tail wood landing squid is too fragile, and needs reinforcing.

Here is my maiden flight video (gear list in video details):

https://www.youtube.com/watch?v=exoCKpwOr_0

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I can't be happier with this plane.
It was easy to build, all pieces fit perfectly and are really well finished.
One nice detail is that wings can be easily detached and reliably attached using a screw that holds them in their position.
Having watched some videos, I was concerned about landing speed, but actually it does not need much space to land (watch the video).
It is very stable, and with the motor I used (dys 2217 1500kv) taking off is really easy, and it climbs really well.
The only problem I have found so far is the tail wood landing squid is too fragile, and needs reinforcing.

Here is my maiden flight video (gear list in video details):

https://www.youtube.com/watch?v=exoCKpwOr_0

Excellent quality. Used hot glue and epoxy to put it together. Mines 1000g with gopro 3 and without battery so auw will be around 1300g. Hxt900 servos fit as good as perfectly into the slots (they could be .5mm thinner) but its not a big deal. Get some servo extension leads 2x10cm and 2x 20cm would be great

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent quality. Used hot glue and epoxy to put it together. Mines 1000g with gopro 3 and without battery so auw will be around 1300g. Hxt900 servos fit as good as perfectly into the slots (they could be .5mm thinner) but its not a big deal. Get some servo extension leads 2x10cm and 2x 20cm would be great

I have to say, I suck it up with the high price of shipping on this FPV Plane, I will tell you right now, it was worth it,, very nice indeed, and lots of room for my gear.. very nice job indeed Hobby King, Thank you..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have to say, I suck it up with the high price of shipping on this FPV Plane, I will tell you right now, it was worth it,, very nice indeed, and lots of room for my gear.. very nice job indeed Hobby King, Thank you..

I have Purchase This Plane with Spec Below. Got 30min Flight Time.
-ntm 2826 1000kv
-3 blade 8inch proppeller
-3500mah 11.1volt
-ArkBird FC
-Mobius Camera
-Hextronik MicroServo
-600mw Boscam 32ch VTX.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have Purchase This Plane with Spec Below. Got 30min Flight Time.
-ntm 2826 1000kv
-3 blade 8inch proppeller
-3500mah 11.1volt
-ArkBird FC
-Mobius Camera
-Hextronik MicroServo
-600mw Boscam 32ch VTX.

I use vector OSD FC ,60HK esc SimonK flashed, 1450kv Emax motor , 4s 5000amp , very heavy but fly very smooth it can handle weight easily .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use vector OSD FC ,60HK esc SimonK flashed, 1450kv Emax motor , 4s 5000amp , very heavy but fly very smooth it can handle weight easily .

I am really blown away with the quality of this kit. All parts fit perfectly, surfaces are SUPER smooth and the build is as easy as it could get with an ARF foamy. Wings are super stiff, plenty of carbon rods in there.

Only downside: The top hatch is a bit weak at the aft wing spar. Easy fix is to strengthen it with some carbon flats. Also see RCGroups or other forums on this.

Five crowns, will maiden today.

(Setup info: 2830 1000kV, 9x5 HQprop, HK 15178 servos, Plush 60A, Zippy 5000mAh 4S, AR600 for test)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am really blown away with the quality of this kit. All parts fit perfectly, surfaces are SUPER smooth and the build is as easy as it could get with an ARF foamy. Wings are super stiff, plenty of carbon rods in there.

Only downside: The top hatch is a bit weak at the aft wing spar. Easy fix is to strengthen it with some carbon flats. Also see RCGroups or other forums on this.

Five crowns, will maiden today.

(Setup info: 2830 1000kV, 9x5 HQprop, HK 15178 servos, Plush 60A, Zippy 5000mAh 4S, AR600 for test)

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save