New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

MKS DS9660 Precise Digital Servo 4,6 kg / .10sec / 27g

MKS DS9660 Precise Digital Servo 4,6 kg / .10sec / 27g

Discontinued Product

Please continue searching for a similar product.
SKU:
DS9660
WANT FREE SHIPPING? Click here to find out more!

Ceci est un servo de haute précision qui serait le mieux adapté pour les hélicoptères 3D agiles et sensibles. Il peut être utilisé dans un plan, bien que sa précision ne peut pas être pleinement apprécié. Mieux specd et plus précis qu'un Futaba ou Hitec, la MKS DS9660 est un servo respecté à Taiwan, en Corée et au Japon.

Système de contrôle: + Pulse Width Control 1500 usec neutre
Pulse requis: 3-5 Volt crête à crête d' onde carrée
Tension de fonctionnement: 4,8-6,0 Volts
Température de fonctionnement: -20 à +60 degrés C
Vitesse d'exploitation (4.8V): 0.13sec / 60 degrés à aucune charge
Vitesse d'exploitation (6.0V): 0.10sec / 60 degrés à aucune charge
Stall couple (4.8V): 51,38 oz / in. (3.7kg.cm)
Stall couple (6.0V): 63,88 oz / in. (4.6kg.cm)
Angle de fonctionnement: 45 Deg. une impulsion latérale voyageant 400 usec
Réalisation: Counter Clockwise / Pulse Voyager 1200 ~ 1500 usec
Type de moteur: Coreless Motor
Potentiomètre Entraînement: Entraînement indirect
Type de roulement: double roulements à billes
Type d' engin: Tous Metal Gears
Connecteur Longueur de câble: 15cm
Dimensions: 43 x 15 x 28.6mm
Poids: 1,58 oz (35g) hélicoptères appliquent avec 400-550 classe

  • UGS DS9660
  • Brand -
  • Capacité ( mAh ) -
  • Poids 89.0000
  • Longueur 0.00
  • Packaging Width 0.00
  • la taille 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

dimensions are wrong
direct from mnufcturer. Specs:

Control System: Pulse Width Control
Working frequence: 1520s / 333hz
(RX) Required Pulse: 3.0 ~6.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.8 ~6.0 V DC Volts
Operating Temperature Range: -10 to 60 Degree C
Operating Speed (4.8V): 0.13 sec/60 degrees at no load
Operating Speed (6.0V): 0.10 sec/60 degrees at no load
Stall Torque (4.8V): 3.7 kg.cm (51.4 oz/in)
Stall Torque (6.0V): 4.6 kg.cm (63.9 oz/in)
Connector Wire Length: 24.0 cm (9.4 in)
Dimensions: 35.8X15.2X29 mm (1.41x 0.6x 1.14 in)
Weight: 32.3 g (1.14 oz)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

dimensions are wrong
direct from mnufcturer. Specs:

Control System: Pulse Width Control
Working frequence: 1520s / 333hz
(RX) Required Pulse: 3.0 ~6.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.8 ~6.0 V DC Volts
Operating Temperature Range: -10 to 60 Degree C
Operating Speed (4.8V): 0.13 sec/60 degrees at no load
Operating Speed (6.0V): 0.10 sec/60 degrees at no load
Stall Torque (4.8V): 3.7 kg.cm (51.4 oz/in)
Stall Torque (6.0V): 4.6 kg.cm (63.9 oz/in)
Connector Wire Length: 24.0 cm (9.4 in)
Dimensions: 35.8X15.2X29 mm (1.41x 0.6x 1.14 in)
Weight: 32.3 g (1.14 oz)

Mal iyi ama pahal.

5-6 krm oldu salamlar imdilik...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mal iyi ama pahal.

5-6 krm oldu salamlar imdilik...

Very precise Servo. I unse it in my Zlin 50 for Rudder. Enough Power for that and the metal Gear shows still the same nearly not noticeable slope than at the beginning. Have survived now over 70 landings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very precise Servo. I unse it in my Zlin 50 for Rudder. Enough Power for that and the metal Gear shows still the same nearly not noticeable slope than at the beginning. Have survived now over 70 landings.

Concurent direct de futaba,

fonctionne merveille,

command ici parce que tjours un peu moins cher que le prix en europe !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Concurent direct de futaba,

fonctionne merveille,

command ici parce que tjours un peu moins cher que le prix en europe !

these servos have the tightest metallic gearbox I have ever seen... Tighter than their rival MPX Micro Digi. The torque seem on par and this servo does support a direct power source made from 2s A123 (=6.6V) without heating or buzzing. A bit pricey but super high quality servo mounted at the full flying elevator of my 3.5m glider. The other two in my order will control the flaps of my new 5 m glider.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

these servos have the tightest metallic gearbox I have ever seen... Tighter than their rival MPX Micro Digi. The torque seem on par and this servo does support a direct power source made from 2s A123 (=6.6V) without heating or buzzing. A bit pricey but super high quality servo mounted at the full flying elevator of my 3.5m glider. The other two in my order will control the flaps of my new 5 m glider.

Nearly perfect swash plate servo for an T-Rex 500. Fast, strong, precise and reliable. Fits well to the TR frame. - I use it at 6V in a V-stabi flybarless system.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nearly perfect swash plate servo for an T-Rex 500. Fast, strong, precise and reliable. Fits well to the TR frame. - I use it at 6V in a V-stabi flybarless system.

What a great servo fast for tail (rudder)used with 401 work great no issues

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What a great servo fast for tail (rudder)used with 401 work great no issues

I ordered 3 of them for my protos 500. They works perfectly. Very precise and strong for 500 cyclic. I recommend it for all pilot's level. If I build another 500 heli, I would use it again. Thank you HB

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered 3 of them for my protos 500. They works perfectly. Very precise and strong for 500 cyclic. I recommend it for all pilot's level. If I build another 500 heli, I would use it again. Thank you HB

I am very pleased with this product.

I bought a second set of servo for my 500

(SJM 430 Vbar and Trex 500 Vbar).

Fast, accurate, reliable.

Recommend to the cyclic 500.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am very pleased with this product.

I bought a second set of servo for my 500

(SJM 430 Vbar and Trex 500 Vbar).

Fast, accurate, reliable.

Recommend to the cyclic 500.

Received it recently and hadn't the time yet to test it. But i already knew this servo so i can say that is a great servo and very well construted.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received it recently and hadn't the time yet to test it. But i already knew this servo so i can say that is a great servo and very well construted.

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save