New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

MT2213-935KV MultiStar Moteur et Hélice Combo 10x4.5 CW / CCW

MT2213-935KV MultiStar Moteur et Hélice Combo 10x4.5 CW / CCW

Discontinued Product

Please continue searching for a similar product.
SKU:
9045000001-0
WANT FREE SHIPPING? Click here to find out more!

Vous recherchez le système d'alimentation ultime pour votre projet multi-rotor prochain? Cherchez pas plus loin!
Les outrunners Turnigy Multistar sont conçus avec une chose à l'esprit - maximiser la performance multi-rotor! Ils disposent d'aimants haut de gamme 45SH, roulements NMB de haute qualité, 14 Polonais, support moteur sur mesure et tous sont de précision équilibrée pour le bon fonctionnement, ces moteurs sont conçus spécifiquement pour une utilisation multi-rotor.

Le 2213 intègre l'adaptateur d'hélice dans le carter de moteur sans problème pour la fixation et le centrage de l'accessoire. Les deux fente (style DJI) et des accessoires standards peuvent être utilisés, donc pas plus d'endommager votre prop de overnighting essayant de sécuriser vos deux adaptateurs pièce prop à l'arbre. Le 2213 a un bâti en aluminium monter pour une installation rapide et facile sur votre cadre multi-rotor. Ce kit multi-Star est livré avec deux accessoires 1045 un CCW et un CW et est idéal pour une 3 cellules set-up pour une taille de 450 Quad, 550 ou 700 Hex Octo. Et pour ceux utilisant une cellule 4 mis en place peut utiliser 8045 taille prop pour une réponse ultra-rapide.

Ces outrunners Multistar ont été spécialement conçus à partir du sol pour une utilisation multi-rotor et ne sont pas basés sur des moteurs d'avion.


Spec:
KV (RPM / V): 935
Cellules Lipo: 2-4s
Max Surge Watts (W): 200
COURANT MAXI (10s): 15 ampères
Non Courant de charge: 0,4 ampères
Inteme Résistance: 0,180 ohm
Nombre de pôles: 14
Dimensions (Dia.xL): 28 x 26 mm (sans compter l'arbre d'hélice)
Arbre du moteur: 3mm (pas l'arbre d'hélice)
arbre d' hélice: Slotted (DJI) ronde 8mm de style (7mm plat à plat) a démissionné à 6mm et un accessoire écrou M6
Prop: 10x4.5 (3S) 8 x 4,5 (4S)
Poids: 55g
espacement des trous: 16mm * 19mm

  • UGS 9045000001-0
  • Brand MultiStar
  • Poids 169.0000
  • Longueur 310.00
  • Packaging Width 35.00
  • la taille 135.00
  • Kv ( rpm / v) 935.00
  • Max Current (A) 15.00
  • Résistance ( mh ) 180.00
  • Max Tension (V) 0.00
  • (W ) 200.00
  • Arbre A ( mm ) 8.00
  • Longueur B ( mm ) 26.00
  • Diamètre C ( mm ) 28.00
  • Longueur Can D ( mm ) 14.00
  • Longueur totale E ( mm ) 36.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Super Shop für den Modellbauer.
65 Bestellungen in dreieinhalb Jahren, davon etwa 30 über EU-Warenhaus. Nicht ein einziges abwicklungstechnisches Problem.
Super Live Support.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super Shop für den Modellbauer.
65 Bestellungen in dreieinhalb Jahren, davon etwa 30 über EU-Warenhaus. Nicht ein einziges abwicklungstechnisches Problem.
Super Live Support.

These are rubbish! DONT GET THESE!!! The bearings on them are awful, my quadcopter does not fly because of these, AVOID!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are rubbish! DONT GET THESE!!! The bearings on them are awful, my quadcopter does not fly because of these, AVOID!

A great price for a surprisingly good motor, well balanced with tight windings and soft cable with bullet connectors pre soldered. Props look cheap so i wont be using on my current build.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A great price for a surprisingly good motor, well balanced with tight windings and soft cable with bullet connectors pre soldered. Props look cheap so i wont be using on my current build.

Excellent motor. I bought 4 pc for my multirotor, and all fine. The props need a little balancing.
I use with HK X580 frame, 30A HK BlueSeries ESC, Zippy Compact 3S 2200mAh 25C.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent motor. I bought 4 pc for my multirotor, and all fine. The props need a little balancing.
I use with HK X580 frame, 30A HK BlueSeries ESC, Zippy Compact 3S 2200mAh 25C.

7 star good and low cost

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

7 star good and low cost

Used these on my Maxi quadlugs tricopter. Works well with 20a esc and 2200mah 3 cell get 7 minutes flight time

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used these on my Maxi quadlugs tricopter. Works well with 20a esc and 2200mah 3 cell get 7 minutes flight time

Great, too bad the motor cables are a bit short, nut other than that - good!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great, too bad the motor cables are a bit short, nut other than that - good!

Motor ideal para montar en un cuadricoptero tipo 450. Yo los tengo montados en el Quanum Venture y la verdad es que estoy encantado. Uso unas palas 1045 y pese a que hacen un poco de ruido, el aparato se mantiene muy estable en el aire. Con esa pontencia levanta bastante peso. Recomendados!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor ideal para montar en un cuadricoptero tipo 450. Yo los tengo montados en el Quanum Venture y la verdad es que estoy encantado. Uso unas palas 1045 y pese a que hacen un poco de ruido, el aparato se mantiene muy estable en el aire. Con esa pontencia levanta bastante peso. Recomendados!

These motors are great! I have bought a total of 30 of these motors for numerous multirotor builds and they are extremely durable, they have been in crashes from 100m high onto concrete and come out with just a few scratches. They have a super strong prop shaft and put up with a 10 inch prop on 4s no problem. Highly recommend these great motors!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These motors are great! I have bought a total of 30 of these motors for numerous multirotor builds and they are extremely durable, they have been in crashes from 100m high onto concrete and come out with just a few scratches. They have a super strong prop shaft and put up with a 10 inch prop on 4s no problem. Highly recommend these great motors!

Have count less hours of flight on these motors and seem as strong as the day I got them. The original propellers I only used for about a week before I got CF ones but they seemed OK to me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have count less hours of flight on these motors and seem as strong as the day I got them. The original propellers I only used for about a week before I got CF ones but they seemed OK to me.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Customer files
Thrust table Download [185]
dji 2212 vs tmotor 2214 Download [92]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save