Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

"Multistar 32Bit 30A-0-LITE" "NAKED" ""

Generating Links

"Multistar 32Bit 30A-0-LITE" "NAKED" ""

Prix:

Now save économisez 6,70 € 6,70 €

Special Price 7,02 € 7,02 €

You save économisez 6,70 € 6,70 €

Was  13,72 €

Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9351000081-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Turnigy MultiStar 32bit ESCs are super simple to install and very easy setup. They have already taken spots on the podium a number of times with our beta testing Ninjas. If you're looking for an edge against the competition and take your FPV drone racing seriously the Turnigy MultiStar 32bit ESCs are worth taking a closer look at. 

Turnigy MultiStar 32bit ESCs feature a proprietary firmware (Rumored to have been developed in DrEvils Lab) delivering a smooth linear throttle response, without sacrificing a rapid, crisp response to any throttle input.

Turnigy MultiStar ESC's come pre-tinned, solder ready, all you need to do is add your own selected plugs or adjust wire lengths and solder the connections. With their small lightweight design and these ESC's will have you racing fast and on Budget.

Features:
• Smooth and linear throttle control 
• Fast response to throttle input 
• Arm Cortex-M0 MCU
• Stalled motor protection 
• Throttle signal lose protection 
• Safe power-on (throttle lockout) 
• Support 480Hz high refresh rates 

Specs:
Constant Current: 30A
Input Voltage: 2-4 cell LiPoly
BEC: No BEC (OPTO)
MCU: Arm Cortex-M0
PCB Size: 28 x 14 x 5mm
Weight: 9g

  • Turnigy Multistar 32Bit Race Spec ESCs
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Herb | Acheteur vérifié

  • Overall
  • Quality
  • Value

Overall

Jan 01, 2021

I cannot give a review for this product because 50 days after ordering I still haven’t received it.

Klas | Acheteur vérifié

  • Overall
  • Quality
  • Value

Sep 23, 2020

Wayne | Acheteur vérifié

  • Overall
  • Quality
  • Value

Simple to wire

Jul 19, 2020

ESC is dated using ONESHOT125 protocol but price is dropped so value for money.
Follow this wiring guide:
Looking at the pads from 4 - 3 orientation:
= (+). = (+)
- Signal = Signal
- GND. = (-)
= GND
Read the manual from https://cdn-global-hk.hobbyking.com/media/file/9/3/9351000079-0_edited.pdf to find out how to adjust ESC rotation CW - CCW manually.

Wayne | Acheteur vérifié

  • Overall
  • Quality
  • Value

Manual and wiring setup

Jul 19, 2020

Manual can actually be downloaded from:
https://hobbyking.com/en_us/multistar-32bit-30a-0-lite.html
They are the same item just that this is the NAKED option for custom builds.
Protocol is ONESHOT125.
Yes, you can setup the motor rotation manually although you would have to do it before soldering to FC. Please read the manual in above link for the steps.

Bitpool | Acheteur vérifié

  • Overall
  • Quality
  • Value

Not much to say :)

May 26, 2019

ESC's does great, running 2206 2600kv on my 4" quad, just does the job as supposed to.

Adam | Acheteur vérifié

  • Overall
  • Quality
  • Value

What the F?

Aug 23, 2018

How the hell do I know where to solder the positive and negative. The pads aren't labeled and there are no instructions???

Roland | Acheteur vérifié

  • Overall
  • Quality
  • Value

Nice! low weight and size

Dec 26, 2017

the escs worked perfectly on 3S. One of them burned out while plugin the 4S Lipo. Think gonna try again with another esc of this type.
the smd electronic parts are not placed very precise but the soldering pads look high quality and will not burn away like others sometimes do.

Roland | Acheteur vérifié

  • Overall
  • Quality
  • Value

Nice! low weight and size

Dec 26, 2017

the escs worked perfectly on 3S. One of them burned out while plugin the 4S Lipo. Think gonna try again with another esc of this type.
the smd electronic parts are not placed very precise but the soldering pads look high quality and will not burn away like others sometimes do.

Roland | Acheteur vérifié

  • Overall
  • Quality
  • Value

Nice! low weight and size

Dec 26, 2017

the escs worked perfectly on 3S. One of them burned out while plugin the 4S Lipo. Think gonna try again with another esc of this type.
the smd electronic parts are not placed very precise but the soldering pads look high quality and will not burn away like others sometimes do.

Roland | Acheteur vérifié

  • Overall
  • Quality
  • Value

Nice! low weight and size

Dec 26, 2017

the escs worked perfectly on 3S. One of them burned out while plugin the 4S Lipo. Think gonna try again with another esc of this type.
the smd electronic parts are not placed very precise but the soldering pads look high quality and will not burn away like others sometimes do.

  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!