Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

MultiStar & Afro Combo Pack - 2206 Bébé Beast V2 Motor et 12A ESC Afro Set de 4 CW / CCW

Generating Links

MultiStar & Afro Combo Pack - 2206 Bébé Beast V2 Motor et 12A ESC Afro Set de 4 CW / CCW

Prix:

Now save économisez 0,00 € 0,00 €

94,22 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9192000209-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Le nouveau combo facile de MultiStar et afro, correspondant à des combinaisons les plus populaires dans un seul paquet facile.

Le combo "Baby Beast" correspond aux légendaires MultiStar 2206 moteurs V2 CW / CCW avec 12A V3 Afro CES pour une parfaite 220 ~ 300mm puissance quadcopter combo. Plus de travail de conjecture, pas plus d'attente pour le stock de toutes les parties de combo.

L'Afro ESC bénéficie d'une grande efficacité, tout canal N conception MOSFET, entrée PWM de matériel sans gigue, et la réponse de puissance en douceur, la série ESC Afro sont en train de changer les attentes des pilotes multirotor à travers le monde. La série Afro ESC sont livrés avec le logiciel multirotor de SimonK spécifique préchargé, pas besoin de reflasher. Pour plus de commodité l'USB linker Turnigy peut être utilisé via le câble de signal PWM pour toutes les futures mises à jour logicielles éliminant le besoin de gabarits clignotants compliqués ou la nécessité de couper ouvrir le rétrécissement de la chaleur.

Le 2206-2150KV V2 MultiStar surnommé le "Baby Beast", est le moteur de monstre pour les petits 250 Quadrirotor de classe! Conçu pour 5 ou 6 accessoires de pouce, ce moteur a une puissance sur le robinet, et prêt pour votre pleine charge 250. Le moteur a été renforcée dans tous les bons endroits pour FPV durabilité, avec l'arbre 3.17mm centre, bride 11mm prop et 5mm prop arbre, il n'y a pas besoin de se soucier de l'arbre occasionnelle de la manière. Il est équipé de roulements calées et préchargés et fils de silicium de haute qualité. Si vous êtes à la recherche de plus de puissance, de durabilité et de valeur pour votre sous-300mm multirotor, pensez .... MultiStar 2206 la Bête bébé

MultiStar simplifie le monde de Multi-Rotors avec leur gamme de produits construit à cet effet et en prenant la conjecture hors de votre configuration.

Caractéristiques (moteur):
KV (RPM / V): 2150
Cellules Lipo: 2 ~ 4s
Max Power: 120w
Max Amps: 10A
Dimensions (Dia.xL): 27 x 17mm
Arbre du moteur: 3,17 (arbre de transmission 5mm) 2CW 2CCW
Prop arbre: 5 mm ou montage direct avec le centre 9mm au centre
Poids: 30g
L' espacement des trous de fixation: 16mm * 19mm
Connecteurs: bullet 2mm

Caractéristiques (Afro 12A ESC):
Consommation: 12A en continu
Plage de tension: 2-4s Lipoly
BEC: 0.5A linéaire 5.0V
Freq d'entrée: 1KHz
Firmware: afro_nfet.hex
Décharge fils / bouchons: 20AWG / 2mm mâle
Fil de moteur / bouchons: 20AWG / 2mm femme
Poids: 10g (fil inclus, bouchon, thermorétractable)
Taille: 25 x 20 x 6mm

Les redevances payées sur chaque unité vendue à SimonK et Hamasaki pour leur travail de conception, sans laquelle l'Afro ESC ne serait jamais né, merci les gars!

* Remarque: inférieure longueur de vis de montage est essentiel pour vérifier. Le boîtier réduit a été réduit en hauteur pour faire un bon compact 2206, le compromis est le moteur d'enroulement est plus proche du fond, donc les vis de fixation trop longue pourraient contacter les enroulements et endommager le moteur.

  • Kv ( rpm / v) 2150.00
  • Max Current (A) 18.00
  • Résistance ( mh ) 102.00
  • Max Tension (V) 16.00
  • (W ) 320.00
  • Arbre A ( mm ) 2.00
  • Longueur B ( mm ) 17.00
  • Can Diamètre C ( mm ) 28.00
  • Longueur Can D ( mm ) 7.00
  • Longueur totale E ( mm ) 22.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • MultiStar Motor Set Combo
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Peter | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 16, 2016

this set fitted fine into my tilt rotor 300mm quad. The motors have no vibrations and in combination with the ESC the quad reacts as fast as lightning. Baby Beast is a good name because the motors are small but the power they produce is amazing. I do nit regret in purchasing this awesome set.
THX to Hobbyking

Cheers
Peter

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 30, 2016

fantastic setup unbelivable punch for my 260 frame

DesertRose | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 14, 2016

super fantastic all is well esc and motor very smooth and high thrust on 3s i added prop 5x3 and its became rocked out of control then i decided to use 5 inch now its under control very nice and well finished product highly recommended if you have quad 250 - 300

D-MONEY | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 25, 2016

I ordered a 2nd set if these and they weren't QC'd before shipping. Unfortunately HobbyKing is infamous for this judging from the reviews on MANY items. The white epoxy inside the motor where the wires connect was spilled all over one of the mounting holes from the inside. So i tried to remove it but the wire was stuck in that position and pushed against the winding's and jammed up the motor. So if you get a good set of these they're great but its possible to get a bad set (for numerous reasons).

Darklighter | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 26, 2016

These motors and escs scream in my robocat. I'm running 5x4.5 bull nose props with a 3s 2200mAh 30C. Perfect combination.

youri | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 25, 2016

2 of the motors became smoke without even having props mounted :(
Cant buy any replacements overhere so had to buy them from someone on Ebay :(

Alexandre | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 08, 2016

Good product for the price.

Really too bad that the kit doesn't contain the M3 screws necessary to attach the motors to the frame. Doesn't "totally take out the guess work" ;)

Mahut | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 06, 2016

I got one set and three of the motors were making some weird noise and one was perfect,I said I had bad luck,then I bought another set and now again,two motors are faulty.TWO MONTHS have passed and I still can't have a functional quadcopter.I am still waiting for their "Initial Evaluation" and I am convinced they will not replace anything.Don't even bother to buy these,you will need at least 2 sets to get 4 working motors.Better go and buy some cobras.

DR_Suchong | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 23, 2016

i buyed these Combo for my ZMR250 Quad, 3s 2200maH, flashed them with last BLHeli Software. Damped Light with SP3 FC and Cleanflight, Timing: Medium/High, Oneshot enabled, after 1 short flight 2 motors didnt spin up correctly, they startet to cogging, even on full throttle, >ESC fail, reflashed, same again. After trying some settings in BLHeli, suddenly one Motor started to smoke >ESC fail also smoked up.

Now tried to buy one motor again, >Backorder, R.I.P. 3xMultistar Motor

Sorry i cant recommend these ESC's to anyone, this is trash. 80 for trashcan. Go for some DYS parts. These Afro's are better rated, that they in reality are. Never had that bad ESC's in my hands.

Furthermore all of the motors where out of balance, the motors were vibrating the quad over the floor (without props). I solved this with some Tape for Balancing, but this is not very user friendly.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 13, 2016

A multirotor[1] or multicopter is a rotorcraft with more than two rotors. An advantage of multirotor aircraft is the simpler rotor mechanics required for flight control. Unlike single- and double-rotor helicopters which use complex variable pitch rotors whose pitch varies as the blade rotates for flight stability and control, multirotors often use fixed-pitch blades; control of vehicle motion is achieved by varying the relative speed of each rotor to change the thrust and torque produced by each.



Due to their ease of both construction and control, multirotor aircraft are frequently used in radio control aircraft and UAV projects[2][3][4][5][6][7] in which the names tricopter, quadcopter, hexacopter and octocopter are frequently used to refer to 3-, 4-, 6- and 8-rotor helicopters, respectively.[8]





Hexacopter.[9]

In order to allow more power and stability at reduced weight coaxial rotors can be employed, in which each arm has two motors, running in opposite directions (one facing up and one facing down).[10]123123

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Fichiers clients
No File Name Download [253]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Related Tags