Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Multistar Elite 2306-2150KV 'MINI MONSTER' Quad Racing Motor (Set Of 4 CW / CCW)

Generating Links

Multistar Elite 2306-2150KV 'MINI MONSTER' Quad Racing Motor (Set Of 4 CW / CCW)

Prix:

Now save économisez 0,00 € 0,00 €

61,11 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9536000017-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Ne cherchez pas plus loin pour le nec plus ultra en matière de durabilité et de la puissance dans des mini moteurs quad. La nouvelle Multistar Elite 2306 2150KV MINI MONSTER est ici

L'Elite 2306 ~ 2150kv est surnommé le MONSTER MINI, produisant 1000g près de la poussée sur une prop 6inch et 4s (chaque). Le monstre est comme aucun autre mini-moteur sur le marché, il a été construit autour d'un arbre principal 4mm ... qui est 4mm correcte, et massives 11mm roulements EZO japon! La cloche plus épais a ajouté l'efficacité et la durabilité. Le fil enroulé stator unique peut traiter avec les hauts ampères et la chaleur beaucoup mieux multi-brin. L'adaptateur 5mm prop remplaçable augmente sa capacité de survie dans un accident percutant. The Monster Mini avec l'arbre principal 4mm avec 11mm roulements, cloche épais, seul fil enroulé rend ce quad moteur le plus durable MINI autour.

moteurs Multistar Elite sont plus d'un nom de fantaisie et nouvelle couleur vert foncé .. Construit en utilisant les composants de haute qualité des roulements Japon, N45SH aimants, stratifications .2mm, fil de cuivre sans oxygène 180deg, .005g équilibrant, le vent parfait fixé et 100% QC, puis la conception de chaque moteur sont également évalués pour leur application de type et tout de leur montage, les adaptateurs de type prop sont pris en considération. Les moteurs d'élite sont des œuvres vraiment de l'art

Multistar Elite est inégalée dans la qualité et de la valeur, et la performance parle de son auto.

Caractéristiques:
• arbre principal 4mm avec 11mm roulements
• EZO Japon Roulements
• Aimants N45SH
• Tôles de 0.2mm
• oxygène 180deg simple brin libre fil de cuivre
• Ou mieux équilibrer 0,005 g
• déposer les enroulements parfaits
• 100% QC
• Adaptateur remplaçable prop CW

Spécifications:
KV (RPM / V): 2150
Cellules Lipo: 2 ~ 4s
Max Amps: 20A
Dimensions (Dia.xL): 23 x 6mm
Moteur arbre: 4 mm (arbre de transmission 5mm)
Prop arbre: 5 mm ou montage direct avec le centre 9mm au centre
Poids: 37,5 g
L' espacement des trous de fixation: 16mm * 19mm
Connecteurs: bullet 2mm

Comprend:
4 x Multistar 2306 - 2150KV moteurs et adaptateurs prop.

  • Kv ( rpm / v) 2150.00
  • Max Current (A) 20.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 0.00
  • Arbre A ( mm ) 3.00
  • Longueur B ( mm ) 0.00
  • Can Diamètre C ( mm ) 0.00
  • Longueur Can D ( mm ) 0.00
  • Longueur totale E ( mm ) 0.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • Multistar Elite 'MINI MONSTER' Quad Racing Motor
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Pasca | Acheteur vérifié

  • Overall
  • Quality
  • Value

Pretty, Silent, pretty silent!

Apr 18, 2018

First what a bargain... don't see that often.
Second, these are well made with good bearings. Unlike others that came with at least one bodged bearing. Maybe in shipping? Odd.
Bought them to revive a Trifecta and mod a 450 heli with direct drive tail rotor, hence the whole set sees use.
They seem to provide enough power on 3S and 6050 prop to punch nicely a trifecta with a dead 2.2A battery.
I guess it will shoot out like a canon ball on 4s.
But I'm a chill flyer, not much freestyle or racing.
Cons: not very well balanced. I will balance them dynamically.

Kai | Acheteur vérifié

  • Overall
  • Quality
  • Value

Wow

Feb 20, 2018

Picked these up whilst on sale for 7.12 and bought x2 packs. Absolutely great motors for 5inch builds when trying to get good torque/punch at the expense of top speed. Good freestyle motor for heavier quads.

Lee | Acheteur vérifié

  • Overall
  • Quality
  • Value

Still to be determined

Nov 20, 2016

Out of the box one of the motors had a piece of metal inside the bell which caused the motor to be locked up. Then I tried to mount to a Eachine Falcon 180 frame and found when I tightened down the motors they would not spin as the retaining ring on the motor shaft protrudes out enough that it rubs on the frame. I'm going to pick up some small washers tomorrow to see if I can shim up the motor so the clip doesn't contact the frame. Overall the build looks like good quality.

fsssh | Acheteur vérifié

  • Overall
  • Quality
  • Value

Nice but not perfect - and 9mm bearings

Nov 19, 2016

Have these fittied on a 280 with FVT 20A_S esc and they are pretty smooth and perform well in flight, they do vibrate out of the box more than i thought they would given the claims. Build quality is good, some of the windings are a bit 'loopy' and i had to order some new bolts to attach the rotor hubs as the hole for the allen key was not properly formed on a couple of them, i'm being picky but I have not had this before with any other bolt. Regarding the rotor hubs, when i use DAL 5045 props and standard nyloc nuts the thread is barely long enough to bite in the locking part of the nut.
My biggest issue with these is that the specs say 11mm bearings, but it doesn't mention they actually have 11mm bearings at the bottom and 9mm bearings at the top, and i have had 2 of these fail already. In a motor that is so powerful it could rip itself apart and given that there is room in the housing why not put 11mm at both ends?

Grant | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 18, 2016

Got these motors for my latest 250 racer build. They seem nice thus far. One motor was not threaded at the base. I had to tap it. The other 3 were fine. Im using the diatone carbon 250 frame and had to bore out the mounting holes so the shaft clips would clear. Havent tried them on 4s yet but I will. Overall impression is QC was a bit weak on this set but lack of threads on 1 isnt a deal breaker. The thrust G rating is what made me decide on these over the scorpions

Sonny | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 17, 2016

Great Quality Product, , , Wish it came with one more of each bolt. Or at the least a list of each bolt size so i can reorder after they fall out . Also would like to see soder tabs for the wires. those winding wires are thin and easy to break.

tramsgar | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 12, 2016

Great motors with awesome power! Really nice size and plenty of power from a sturdy design. There are two things I'd like to see improvements in, though, the first being the end of the windings which hang down on the underside of the motor: Tuck those in, will you? Secondly, the price is way off. Get real. But overall, awesome power.

__Okdi | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 06, 2016

These motors put a big smile on my face everytime I fly them! I equipped my 2nd RoboCat270 also now with these motors. First runs on 3s, 2nd on 4s. I love these motors, they have the punch you want, they are robust, they dont ask, they simply pull through. There is significantly more power than from any 2204/5. Biggest punch is on 6045 bi-blades with some 5 G's (!) vertical acc of my 735gr Robo on 4s1800! If I had some, they probably would easily drive triblades of the same size also. But not at 20Amps max anymore, hehe. I only have 5045 DAL V2. But, just sweet! Great combo!

These motors run phantastic on 3s with 6045 props. There is absolutely power when you need it. On 4s they become a beast using the same props. Scaling down to 5045 triblades helps taming the power but increase much the "free-fly-effekt" because of their smaller resulting surface compared to the 6ers.

Temperature: even on 4s with 6045 they do not get warm at all, temperature management resp efficiency is obviously very good.

MultiStar, please keep producing these motors!

Steve | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 25, 2016

Purchased 3weeks ago. Missing a prop adaptor, two weeks into the RMA still getting stuffed around, save your money and buy something else !!

Michael | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 15, 2016

Be careful with the Motor-Mount Screws (big ones on the right Side of the last Picture)!!!!!!

They don't have the same size, 3 out of 8 Screws were longer and because I didn't realize it (mounted 2 Motors before and the Screws for them fitted perfect), I have a broken Motor now...

  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires