Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

2208- 2600kv-CW

Generating Links

2208- 2600kv-CW

Prix:

Now save économisez 0,00 € 0,00 €

27,53 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9536000054-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Just like their namesake, the Viking Motors are ready to Raid, Pillage and Plunder.

From the outset, Multistar set about designing a motor that would genuinely crush the competition. Working with the world’s best pilots, MultiStar set about developing a range of motors that give you the edge over the competition. Vikings of Nordic legend were greatly feared due to their sheer brutality and Team Multistar continues this tradition by striking fear in the hearts and minds of would-be drone pilots’ world over. Viking motors are the motor of choice for the 2016 Drone Racing World Champion, Shaun "NYTFury" Taylor.

So, Join the halls of Valhalla where the brave live forever.

Features:
• World champion power
• Awesome performance 
• Endorsed by Shaun "NYTFury" Taylor
• Designed to Win
• Japanese NSK Bearings
• N50SH Magnets for high temperature 
• 0.15mm Stator laminations
• 0.005g or better balancing
• Pre-tinned silicone wire
• CW rotation

Specs:
KV(RPM/V): 2600KV
Battery: 4S LiPoly
Max Power: 630W
Max Amps: 39.1A
No Load Current: 1.6A/10V
Internal Resistance: 0.032ohm 
Number of Poles: 12N/14P
Dimensions(Dia.xL): 22x8mm
Motor Shaft: 3mm 
prop shaft: M5
Weight: 25.3g
bolt hole spacing: 16x16mm
Lamination thickness: 0.15mm
Magnets: N50SH
Balancing spec: 0.005g (or better)
Bearings: Japanese NSK 

Included:
1 x Viking brushless outrunner drone racing motor (CW rotation)
1 x M4 nylon lock nut
4 x M3 hex head motor screws

  • Kv ( rpm / v) 2600.00
  • Max Current (A) 39.10
  • Résistance ( mh ) 0.03
  • Max Tension (V) 14.40
  • (W ) 630.00
  • Arbre A ( mm ) 5.00
  • Longueur B ( mm ) 22.00
  • Can Diamètre C ( mm ) 22.00
  • Longueur Can D ( mm ) 8.00
  • Longueur totale E ( mm ) 37.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Marc | Acheteur vérifié

  • Overall
  • Quality
  • Value

Schlechte Qualität

Sep 17, 2019

Hat nur 2 Wochen durch gehalten dann Motor Schaden trotz 50A ESC/BEC

3D Project Red | Acheteur vérifié

  • Overall
  • Quality
  • Value

Brushless Nerf Project

Jul 21, 2019

This Multistar 2208-2600kV CW motor was used in conjunction with the CCW equivalent motor for a flywheel nerf project.
Flywheels and flywheel cage were custom designed and 3D printed to fit these specific motors.
At just ~30% throttle (from ~11.1V supply), the nerf foam darts go at least 25m/82ft in range! (haven't tested at higher throttle yet!)
In this flywheel application, these motors pull approx 5A each motor at peak, which was much lower than expected (measured with power meter 'ON-BOARD MULTI FUNCTION WATTMETER 6-26V 10-90A' you can get that from Hobbyking).
Running these with a prop on a plane may be much different though.
Looks like these are waaaay OP for nerf flywheel application, but i like it!
Used in conjunction with Multistar 40A ESC Ver.3 per motor. (which turned out to be overkill for my specific needs)

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires