New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

MXS-R Voltige 3D Avion 20CC Balsa 1625mm (ARF)

MXS-R Voltige 3D Avion 20CC Balsa 1625mm (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
248000004-0
WANT FREE SHIPPING? Click here to find out more!

L'un des avions de voltige recherche le plus chaud autour est le MXS-R. De bons regards seuls ne suffisent pas, l'HobbyKing MXS-R 20CC a été conçu avec une chose à l'esprit, impressionnant et acrobaties extrêmes.

La qualité de la MXS-R 20CC est tout aussi bon qu'il obtient, la cellule a été construit pour maintenir le poids de vol minimal mais assez fort pour prendre la peine de voltige extrêmes. La superbe couverture de qualité a été savamment appliquée et pour la touche finale, le capot, la canopée et roue pantalons sont finis dans une peinture brillante profonde. Le matériel qui comprend des roues, réservoir de carburant et les cornes de contrôle de la fibre de carbone est excellent et également choisi de garder le poids de vol à un minimum absolu. En outre, les caractéristiques du modèle brancher les ailes et l'atterrissage en fibre de carbone réducteur et queue d'assemblage de roue.

Le HobbyKing MXS-R 20CC effectue chaque pouce aussi bon qu'il semble, naturellement, il fait un grand avion de voltige de sport, mais il serait juste de dire que le hardcore 3D est ce que le MXS-R a été conçu pour. La légèreté et la précision de la cellule, de grandes surfaces de contrôle, regards superbes et les caractéristiques de la qualité de la ligne font le MXS-R 20CC Un plan doit avoir pour tous les pilotes de voltige et 3D!

Caractéristiques:
• Presque prêt à voler - Il suffit d'installer votre choix de moteur, la batterie et l'électronique
• Tous les Balsa et de contreplaqués de construction
• train d'atterrissage en fibre de carbone et la queue ensemble de roue
• Deux bouchon de pièce dans les ailes
• Superbement appliquée, revêtement de haute qualité
• airfoil complète empennage / ascenseur / aileron et gouvernail
• Excellente palette de couleurs pour faciliter l'orientation
• trappe d'accès large fuselage
• bout d'aile en option générateurs de force latérale

Spécifications:
Envergure: 1625mm
Longueur: 1500mm
Wing Zone: 50.1dm2
Poids à vide: 2700g

A besoin:
20CC moteur gaz
6 Standard- High Torque Servos
Emetteur et récepteur Canal 5-6
récepteur Batterie
Divers adhésifs

  • UGS 248000004-0
  • Brand Other
  • Poids 7500.0000
  • Longueur 1230.00
  • Largeur 295.00
  • la taille 470.00
  • IC / 2 : Elec -
  • Motorsize ( diam ou cc ) -
  • Envergure ( mm ) 1625.00
  • Length(mm) -
  • SaleWeight ( g), -
  • Capacité ( mAh ) -
  • 20cc MXSR
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a very well made airplane.
This MXS-R is also made under brandnames like Aerobeez and/or Flight Models.
The airplane looks a lot like Extreme Flight, only this one is a little bit heavier.
The airframes weight is just above 2 KG (this is without electronics/motor).
I have converted mine to electric. My setup is: TurnigySK3-5055/430kv motor, and 100 A esc with BEC.
Lipo battery is 3700Mah 6S. APC 16x10 propellor. Total weight just under 3200 grams.
I haven't flown it yet, but expectations are high.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very well made airplane.
This MXS-R is also made under brandnames like Aerobeez and/or Flight Models.
The airplane looks a lot like Extreme Flight, only this one is a little bit heavier.
The airframes weight is just above 2 KG (this is without electronics/motor).
I have converted mine to electric. My setup is: TurnigySK3-5055/430kv motor, and 100 A esc with BEC.
Lipo battery is 3700Mah 6S. APC 16x10 propellor. Total weight just under 3200 grams.
I haven't flown it yet, but expectations are high.

Hi everyone,

I highly recommend this kit, it is a top quality ARF with strong hardware. I had to reorder due to my learning curve in gas engines. Installed an OS GT-22 with rubber mounting (Dubro) and it is a great choice. Used recommended servos but make sure you put a strong receiver battery (ideally the most powerful 2S lipo suggested).

I'm still in the break-in period with the motor so not completely sure but I'd say this is not a pure 3D model, more a Sport flying but I will try to move weight and maybe use a smaller gas thank. Other than that go ahead and order it for such a low price!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi everyone,

I highly recommend this kit, it is a top quality ARF with strong hardware. I had to reorder due to my learning curve in gas engines. Installed an OS GT-22 with rubber mounting (Dubro) and it is a great choice. Used recommended servos but make sure you put a strong receiver battery (ideally the most powerful 2S lipo suggested).

I'm still in the break-in period with the motor so not completely sure but I'd say this is not a pure 3D model, more a Sport flying but I will try to move weight and maybe use a smaller gas thank. Other than that go ahead and order it for such a low price!

Update now that the MXS-R is built.
Hardware spec (electric conversion) is:

Motor: Turnigy SK3 5055 430kV
ESC: Yep 120A c/w 10A SBEC
Battery: 6s, 5000mAh, 40c
Prop: Zoar/JXF 18x8 wood
Servos: 'Goteck' HV Std size Coreless

It all went together perfectly. I used 75mm standoffs to position the motor. The dual elevator servos needed 2mm packers to stop them hitting each other. balance was spot on.
She flies great, ample power and needed virtually no trim. the wheel pants cracked a little due to longish grass but that's a general problem with wheel pants when flying off grass. Handling is great, very little coupling and good post stall handing, no wing rock to speak of. Highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Update now that the MXS-R is built.
Hardware spec (electric conversion) is:

Motor: Turnigy SK3 5055 430kV
ESC: Yep 120A c/w 10A SBEC
Battery: 6s, 5000mAh, 40c
Prop: Zoar/JXF 18x8 wood
Servos: 'Goteck' HV Std size Coreless

It all went together perfectly. I used 75mm standoffs to position the motor. The dual elevator servos needed 2mm packers to stop them hitting each other. balance was spot on.
She flies great, ample power and needed virtually no trim. the wheel pants cracked a little due to longish grass but that's a general problem with wheel pants when flying off grass. Handling is great, very little coupling and good post stall handing, no wing rock to speak of. Highly recommended.

Top quality kit, rivaling the liked of Extremeflight. This is the exact same airplane that you can buy elsewhere for double the price from the likes of Aerobeez and others.
Quality of the airframe and components really are top notch. The only slight criticism I can level at it is the paint on the canopy does not match the covering very well but that's not a big deal.
One thing to watch when choosing servos: Servo cutouts are for standard size servos, but infill plates for mini servos are supplied. The dual elevator servos ideally need to be quite low profile to avoid them hitting each other. About 22mm from bottom of servo case to mounting tab, max.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Top quality kit, rivaling the liked of Extremeflight. This is the exact same airplane that you can buy elsewhere for double the price from the likes of Aerobeez and others.
Quality of the airframe and components really are top notch. The only slight criticism I can level at it is the paint on the canopy does not match the covering very well but that's not a big deal.
One thing to watch when choosing servos: Servo cutouts are for standard size servos, but infill plates for mini servos are supplied. The dual elevator servos ideally need to be quite low profile to avoid them hitting each other. About 22mm from bottom of servo case to mounting tab, max.

Wow! What a great flying plane and at such a great price. One of the best looking and best flying planes you can have. I have had many including 3d HobbyShop and this compares to it. Does anything you want and can just Elevator it down to the runway. Check around and you will see Hobbyking has it 100-200 dollars cheaper than other sites. This is a "Flight models" model. I have the green one and know bought this one.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wow! What a great flying plane and at such a great price. One of the best looking and best flying planes you can have. I have had many including 3d HobbyShop and this compares to it. Does anything you want and can just Elevator it down to the runway. Check around and you will see Hobbyking has it 100-200 dollars cheaper than other sites. This is a "Flight models" model. I have the green one and know bought this one.

Just want to start by saying, what a great quality kit. All the hardware is top quality with carbon fibre horns and ball joints. Everything fitted together well with a few small adjustments here and there. Being my first balsa kit it was still quite straight forward to put together. The supplied CD contains a basic manual that is some help but leaves a fair bit to the imagination.

I set my plane up as ep with an ntm 5060 380kv motor, yep 100amp esc, 4500mah 6s batt, 18x10 wood prop and towerpro mg996r servos . All that was needed to make it ep was a hk adjustable motor mount.

The only problems with the build being the 2 elevator servos hit together inside the fuse as it get very narrow towards the tail. I fixed this by putting a small block of wood on one side of servo as a spacer. Also a similar problem with the control horns in the rudder touch as you push them though either side so can't go all the way in but I just evened them out and glued them and they seem solid.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just want to start by saying, what a great quality kit. All the hardware is top quality with carbon fibre horns and ball joints. Everything fitted together well with a few small adjustments here and there. Being my first balsa kit it was still quite straight forward to put together. The supplied CD contains a basic manual that is some help but leaves a fair bit to the imagination.

I set my plane up as ep with an ntm 5060 380kv motor, yep 100amp esc, 4500mah 6s batt, 18x10 wood prop and towerpro mg996r servos . All that was needed to make it ep was a hk adjustable motor mount.

The only problems with the build being the 2 elevator servos hit together inside the fuse as it get very narrow towards the tail. I fixed this by putting a small block of wood on one side of servo as a spacer. Also a similar problem with the control horns in the rudder touch as you push them though either side so can't go all the way in but I just evened them out and glued them and they seem solid.

Customer files
No File Name Download [2792]
No File Name Download [2792]
No File Name Download [2077]
No File Name Download [2057]
No File Name Download [6461]
Manual MXS-R (English) Download [5784]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save