Prix total

0,00 €

Panier 0 Panier 0 Loading...

NGH GF38 38cc Moteur 4 Temps Essence

Generating Links

NGH GF38 38cc Moteur 4 Temps Essence

Prix:

Now save économisez 214,48 € 214,48 €

Special Price 97,01 € 97,01 €

You save économisez 214,48 € 214,48 €

Was  311,49 €

Statut:
Epuisé!
SKU:
406000024-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Les moteurs NGH acquièrent une réputation bien méritée en termes de performances et de valeur, ce sont des modèles de moteurs d'avion spécialement conçus, et non des types de tronçonneuses converties. Le développement continu de NGH en fait l'un des meilleurs disponibles sur le marché aujourd'hui.


NGH continue d'innover avec ce premier moteur à essence 4 temps de production, vous obtiendrez tous les avantages et le son d'un 4 temps mais avec l'économie d'essence. Ce moteur a été conçu à partir de zéro et dispose d'un carburateur Walbro, d'un allumage RcXEL, d'une bielle CNC à deux rouleaux, d'un piston à double anneau pour une meilleure compression, et est monté sur poutre ou radial avec les entretoises fournies. Avec son look saisissant, il est garanti de faire tourner les têtes sur n'importe quel terrain de vol.


Caractéristiques:
• Compact et léger
• Technologie 4 temps
• Faisceau ou montage radial traditionnel
• Excellente qualité et performances


Spécifications:
Type: Moteur à essence 4 temps refroidi par air
Cylindres: Simple
Cylindrée: 37.97cc
Alésage x course: 39 x 31.8mm
Taux de compression: 9:1
Puissance: 3.84cv
Type de manivelle: Forgé avec support à double roulement
Filetage du vilebrequin: 3/8"x 24TPI
Carburateur: Walbro Custom WT1022
Plage de régime: 1800 - 8000 tr/min
Allumage: RcEXL DC-CDI avancé automatique
Bougie d'allumage: CM6 RcEXL
Puissance d'allumage: 4.8 à 8.4v CC (compatible avec les batteries LiFe ou LiPo)
Carburant: mélange essence/huile sans plomb 35:1
Hélices recommandées: 18x8/18x10/20x8 2 pales
Poids: 1580g avec le système d'allumage

  • NGH Gas Engine
  • NGH 38 machine gun like sound
  • Hobbyking HGH38 4stroke sound with muffler
  • NGH 38cc out of the box
  • NGH 38cc on PZL P-24
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Martin | Acheteur vérifié

  • Quality
  • Overall
  • Value

Good engine. I'm happy

Sep 08, 2021

Ordered 2. I haven't run this engine yet but arrived quickly and was well packed

Loukas | Acheteur vérifié

  • Quality
  • Overall
  • Value

Excellent engine

Oct 17, 2018

Excellent engine. I installed this engine in an ESM beaver. The engine works perfect and the noise is incredible. I fly 15 minutes and consumes only 300 ml gasoline. It is a piece of art for me for this low and reasonable price. I am eager every weekend to fly my beaver and hear this incredible sound of a 4 stroke petrol engine.

Lonny | Acheteur vérifié

  • Overall
  • Value
  • Quality

Runs great

Sep 14, 2017

I'm thinking this must be version 2 of this engine. The crankcase relief valves are now plumbed to the intake. Except for the front bearing nipple. With a "Y" connector I simply tapped this to one existing tube running to the intake. Starts easy. Runs stable and smooth transition. Will idle at 1700-1800 forever. Will be installed on a ESM 30cc Beaver. So far nothing negative I can say about this engine. I have also installed the aftermarket muffler offered on this site. Very reasonable price for a solid cut aluminum muffler, compared to the ridiculous cost of the other cheap, thin aluminum offered on this and other similar sites... I would buy another without hesitation if I needed one.

timo | Acheteur vérifié

  • Quality
  • Overall
  • Value

Great engine

Dec 02, 2016

I have also ordered and received this engine and I must say, it's a good piece of workmanship.I have not yet started the engine but I have great expectations,

timo | Acheteur vérifié

  • Quality
  • Overall
  • Value

Great engine

Dec 02, 2016

I have also ordered and received this engine and I must say, it's a good piece of workmanship.I have not yet started the engine but I have great expectations,

painless | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Sep 07, 2016

Surprising value and performance for the $. Pulls a 1/4 scale Tigermoth with authority and nice four stroke sound through the straight pipe, no muffler needed. Arrived tuned and ready to run. Needed 1/8 leaner turn on the low end jet. Idles smoothly at low RPM. Transitions to full throttle instantly. I also run an OS FG40 four stroke gasser. The OS has more power, but for $450 less, I'm planning to order another NGH soon. Measure your cowl length though. With rear carb and a long crankcase this engine is longer than some others. I took 1 3/4" off of the engine box for the Tigermoth and reinforced the new firewall well with gussets and fiberglass.

Thomas Pachler | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Aug 30, 2016

I bought this motor for a Piper Pa - 25 with 2580mm span . the motor runs very well and quiet.

The Price and the Quality of the Engine is also very good

systemspecialis | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Apr 05, 2016

Bought a new one of these last summer. Had to go to Aus tars for a beam mount and Big Pla nes for a muffler. Apart from that, the thermal spacer (white washer was not flat and was causing an air leak in the inlet. After fixing that, it ran great. Is being fitted in a 1/3 scale SpaceWalker. A friend then sold me a slightly used one for 60 (Thats what I said) and also had the same problem. Quickly sorted, it flew last sunday in a Cap 232 72" span and was a great performer. Very clean, sounds right, and lasts 15min on a 16oz tank. Using a 20 x 8 prop at 6000rpm

Dean Blair | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 20, 2016

So far so good. Only ran half a tank through it so far with 30:1 oil mix. 18x8 wooden prop.

Tonnie | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jan 09, 2016

I have received this engine from hobbyking recently. It was in a perfect condition when it arrived. All additional components neatly packed in separate bags. I have read on some fora that people received their engines with damaged cooling fins, but not this one. Must point out that these engines where not supplied by HK.

Assembled everything and can't wait to start her up tomorrow. As soon as I have tested it I will post video's

  1. 1
  2. 2
  3. 3
Fichiers clients
Manual Download [0]
Manual Download [0]
No File Name Download [551]
No File Name Download [100]
596414334X435868X17.jpg Download [100]
No File Name Download [100]
NGH38 Download [100]
NGH38 Download [100]
No File Name Download [551]
Hawker Hurricane 2m/NGH38 Download [3]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires