New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

NGH GT17 de moteur de gaz 17cc Avec Rcexl CDI allumage (1.8HP)

NGH GT17 de moteur de gaz 17cc Avec Rcexl CDI allumage (1.8HP)

Shipped From:
  • USA
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

158,37 €
Statut:
En stock.
SKU:
406000025-0
WANT FREE SHIPPING? Click here to find out more!

Ceci est la GT17 17cc (1.03cu) moteur de NGH de gaz. Bien adapté à .90 modèles lumineux de taille, ce moteur offre un poids léger et la puissance fantastique sortie pour sa taille; 1.8hp @ 12,000rpm.

Ceci est un bon moteur de gaz de qualité et est livré complet avec la fiabilité d'un système d'allumage RCEXL CDI. Installation complète et les instructions de rodage sont également inclus. Le GT17 est non seulement un grand petit interprète, il ressemble beaucoup trop! Doté d'un boîtier sable fonte de manivelle, contrastant anodisé bleu conducteur prop et un carburateur Walbro pour le réglage facile.

Ce paquet est économique à exécuter par rapport aux moteurs similaires de préchauffage de taille. Obtenez une certaine économie de moteur à gaz pour votre modèle aujourd'hui!

NOTE: Ne pas faire fonctionner avec moins que les fabricants de carburant recommandé: rapport de l' huile!

Caractéristiques:
• Système d'allumage électronique inclus
• carburateur Walbro
• Type de montage du faisceau pour le remplacement du moteur de préchauffage facile
• silencieux Compact

Spécifications:
Type de moteur: Monocylindre, 2 temps, refroidi à l' air
Alésage / course: 29 x 25,6
Cylindrée: 16.91cc
Max. puissance: 1.8HP / 12,000rpm
Min. Rpm veille: 1800rpm
RPM pratique: 1800-12000rpm
Ignition: Rcexl CDI avec avance automatique
Bougie d'allumage: 1/4 x 32 Rcexl
Carburateur: série Walbro WT
Huile de lubrification: 2 cycles API Huile moteur TC / JASO FD ou de meilleures spécifications. (Mobil + M2T)
Utilisation générale de carburant: 20: 1 ~ 25: 1
Plage de Propellor: 13x8 ~ 15x8

Dimensions / Poids:
Longueur contreplaque à hélice patron: 103.1mm
Montage: 52mm x 25mm
Hauteur de manivelle axe à la bougie pointe: 100mm
Poids: 850g (y compris l' allumage et le silencieux)

  • UGS 406000025-0
  • Brand NGH
  • Capacité ( mAh ) -
  • Poids 1260.0000
  • Longueur 180.00
  • Largeur 60.00
  • la taille 160.00
  • NGH 17cc & 25cc Gas Engines
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have had three of these, two as replacements for faulty engines, the first one tightened up and wouldn't run, it's replacement came with a noisy lumpy bearing, the second replacement was the same, very noisy and lumpy bearing. C'mon HK get your act together and sort out the dodgy bearings or ditch these engines altogether, which would be a shame as it is seems overall to be a good engine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have had three of these, two as replacements for faulty engines, the first one tightened up and wouldn't run, it's replacement came with a noisy lumpy bearing, the second replacement was the same, very noisy and lumpy bearing. C'mon HK get your act together and sort out the dodgy bearings or ditch these engines altogether, which would be a shame as it is seems overall to be a good engine.

Good engine but I had to remove the choke because of Turbulence's . On back position or high speed it did not work properly. Without the Choke it' ok! I set a 14x8. Just remove the little screw and little metal rounded piece on the carburetor. It's a bit less powerful than the .91 ASP nitro.
Problème d'arrivée d'air, sans le choke (en l'enlevant complètement via petite vis) ou avec capot moteur c'est ok! Un peu moins puissant que l'ASP .91 mais néanmoins très correct. J'en recommanderai certainement d'autres.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good engine but I had to remove the choke because of Turbulence's . On back position or high speed it did not work properly. Without the Choke it' ok! I set a 14x8. Just remove the little screw and little metal rounded piece on the carburetor. It's a bit less powerful than the .91 ASP nitro.
Problème d'arrivée d'air, sans le choke (en l'enlevant complètement via petite vis) ou avec capot moteur c'est ok! Un peu moins puissant que l'ASP .91 mais néanmoins très correct. J'en recommanderai certainement d'autres.

good engine, powerful and well-functioning .... unfortunately broke the rod and are now more than four months that is not available. Dear HK for this great inconvenience I have to give a low rating does not so much for the engine but for the assistance. Spare parts are important ...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good engine, powerful and well-functioning .... unfortunately broke the rod and are now more than four months that is not available. Dear HK for this great inconvenience I have to give a low rating does not so much for the engine but for the assistance. Spare parts are important ...

Don't wast your money on this engine.The one weakness is fatal in that it has no needle bearing in the conrod big end. even running on 20 to1 oil i've had two seize on the crank pin distort out of shape break a piece out of the piston and then they have no spare rods in stock. What a shame as the beam mounts with excellent carby mount is a winner in design

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Don't wast your money on this engine.The one weakness is fatal in that it has no needle bearing in the conrod big end. even running on 20 to1 oil i've had two seize on the crank pin distort out of shape break a piece out of the piston and then they have no spare rods in stock. What a shame as the beam mounts with excellent carby mount is a winner in design

but this motor in a sig 60 71 inch wing span and it says that it can fly with a lot lower speed than 17 cc , But when you get in to any trouble a bit more throttle can get you out of the sh if you know what I mean. this motor is fantastic no trouble at all touch wood. it ticks over like a clock and picks up like it got a turbo on it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

but this motor in a sig 60 71 inch wing span and it says that it can fly with a lot lower speed than 17 cc , But when you get in to any trouble a bit more throttle can get you out of the sh if you know what I mean. this motor is fantastic no trouble at all touch wood. it ticks over like a clock and picks up like it got a turbo on it.

I have one of these engines as well as the 38cc fourstroke. Both are Great.
The 17 I ran on the bench for about an hour in short bursts. Using 25:1 Red line in both engines.
4.8v Nicad Rx pack on the ignition.
I installed the 17 into a Katana 70 V2 Profile model.Just keeps getting better.
Very happy with it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have one of these engines as well as the 38cc fourstroke. Both are Great.
The 17 I ran on the bench for about an hour in short bursts. Using 25:1 Red line in both engines.
4.8v Nicad Rx pack on the ignition.
I installed the 17 into a Katana 70 V2 Profile model.Just keeps getting better.
Very happy with it.

I have one of these. Straight out of the box it needed NO carb adjustment and fired right up. I am running 110 octane racing fuel with a 40 to 1 AMSOIL mixture. This is a strong running engine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have one of these. Straight out of the box it needed NO carb adjustment and fired right up. I am running 110 octane racing fuel with a 40 to 1 AMSOIL mixture. This is a strong running engine.

9.500 RPM 12x8 tripala propella
10.000 RPM 13x6 bipala propella.
8.800 RPM 13x8 Bipala Propella (best)
a 2.600 MSNM

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

9.500 RPM 12x8 tripala propella
10.000 RPM 13x6 bipala propella.
8.800 RPM 13x8 Bipala Propella (best)
a 2.600 MSNM

This is Stavros from Greece
I bought -recently - this engine . It is beautiful ,powerful, runs perfect, not significant vibration& much better if one uses rubbery stuff(bicycle tyre tube) at the retaining bolts. BUT during the first slow flight consuming the second tank ,with the throttle not more than 30pcnt....I faced a sudden stop on the air ,...landed ,...disassembled the engine,...and....the conn.rod was smashed(the lower end) into small pieces,bent by hitting on the crancshaftknob,the piston was broken at the lower side. It may be my mistake but it is not justifying that type of failure.I am an aeronautical engineer and it seems to me that the lower part of the conn. rod is not strong enough to withstand the combustion loads....OR... the movement of the conn.rod along the piston pin is so extensive so that the conn.rod in many cases touches the back plate.
Any way I am willing to hear any comment from any one who has a better experience.
Thank you
Stavros

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is Stavros from Greece
I bought -recently - this engine . It is beautiful ,powerful, runs perfect, not significant vibration& much better if one uses rubbery stuff(bicycle tyre tube) at the retaining bolts. BUT during the first slow flight consuming the second tank ,with the throttle not more than 30pcnt....I faced a sudden stop on the air ,...landed ,...disassembled the engine,...and....the conn.rod was smashed(the lower end) into small pieces,bent by hitting on the crancshaftknob,the piston was broken at the lower side. It may be my mistake but it is not justifying that type of failure.I am an aeronautical engineer and it seems to me that the lower part of the conn. rod is not strong enough to withstand the combustion loads....OR... the movement of the conn.rod along the piston pin is so extensive so that the conn.rod in many cases touches the back plate.
Any way I am willing to hear any comment from any one who has a better experience.
Thank you
Stavros

Hola, Ayer domingo 26 de octubre, realice mi primer vuelo con el NGH 17CC en mi nuevo Stick 60. Despus de calibrada la ALTA, a 9.500 RPM con una hlice tripala 12x8, en los dos primeros vuelos se apago apenas tomo velocidad el avin. Imagine que era por la gran cantidad de aire que pudo entrar en la boca del carburador, por lo que abr 1/8 de vuelta la aguja de la ALTA y esa fue la solucin. Realice cuatro vuelos mas. Es mi primer motor a gasolina, tengo aun problemas con la baja, ademas lo voy a probar con una helice 13x6. NOTA: el vuelo fue a 2.600 mts. de altura.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hola, Ayer domingo 26 de octubre, realice mi primer vuelo con el NGH 17CC en mi nuevo Stick 60. Despus de calibrada la ALTA, a 9.500 RPM con una hlice tripala 12x8, en los dos primeros vuelos se apago apenas tomo velocidad el avin. Imagine que era por la gran cantidad de aire que pudo entrar en la boca del carburador, por lo que abr 1/8 de vuelta la aguja de la ALTA y esa fue la solucin. Realice cuatro vuelos mas. Es mi primer motor a gasolina, tengo aun problemas con la baja, ademas lo voy a probar con una helice 13x6. NOTA: el vuelo fue a 2.600 mts. de altura.

  1. 1
  2. 2
Customer files
No File Name Download [1276]
Exploded parts Download [297]
Manual for Rcexl Ignition Download [557]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save