S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

MFO Prop promenade 50-50 580KV / 2000W

MFO Prop promenade 50-50 580KV / 2000W

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
405 g
SKU:
NTM5050-580

Combinez

et économisez plus
acc
Description
du

moteurs MFO Prop entraînement sont outrunners de performance solide comme le roc avec des enroulements serrés, des roulements de qualité, aimants correctement notés, stator équilibré et anneaux de flux, plus ils sont QC vérifié à 14 points, à partir de matériaux de traitement tout au long de test dyno final.

Parce que nous concevons et construisons ces moteurs complètement en interne (de 3D / 2D de dessin pour les matériaux d'approvisionnement, l'usinage, l'équilibrage, l'assemblage final et dyno) nous pouvons contrôler complètement la production et d'assurer la cohérence du produit de la conception à l'expédition du produit à vous. La suppression des intermédiaires hommes a voulu dire que nous pouvons conduire une meilleure valeur au marché et au détail de ces moteurs à l'usine (nos) prix! Tous les chiffres de performance sont réels et testés sur nos propres dynos automobiles.

Nos ingénieurs QC vérifier et d'équilibrer chaque moteur avant l'expédition à l'entrepôt HobbyKing.com.

Spécifications:
Modèle: MFO Prop série Entraînement 50-50 580kv
Kv: 580rpm / v
Courant max: 90A
Max Power: 2000W @ 22.2V (6S)
Shaft: 8mm
Poids: 347g
ESC: 100A
Nombre de cellules: 4s ~ 6s Lipoly
Trous de boulons: 30mm
Fil de Bolt: M4
Connexion: Bullet-connecteur 4mm

Prop de données de test:
14x8 - 14.8V / 587W / 40.3A / 2,9 kg de poussée
14x8 - 18.5V / 1077W / 60.7A / 4,03 kg de poussée
14x8 - 22.2V / 1906W / 88.2A / 5,36 kg de poussée
15x8 - 14.8V / 626W / 43.6A / 3,3 kg de poussée
15x8 - 18.5V / 1165W / 64.2A / 4,85 kg de poussée
15x8 - 22.2V / 1961W / 88.8A / 6,15 kg de poussée

Product
Specifications

Informations supplémentaires

  • Référence:
    NTM5050-580
  • Brand:
    Non communiqué
  • Poids (g)
    405.00
  • Longueur
    158.00
  • Largeur:
    53.00
  • Taille:
    95.00
  • Kv ( rpm / v)
    580.00
  • Max Currents (A)
    90.00
  • (W ):
    2000.00
  • Longueur B ( mm ):
    50.00
  • Longueur Can D ( mm )
    30.00
  • Max Tension (V)
    22.00
  • Arbre A ( mm ):
    8.00
  • Unit Weight (g):
    347
  • Diamètre C ( mm )
    50.00
  • Longueur totale E ( mm )
    76.00
  • Résistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Motor's internally glued (fail) stator came unglued and damaged the coils.

HOBBYKING FAILED TO HONOR THEIR WARRANTY SAYING I "OPENED" THE MOTOR AFTER SLIDING THE STATOR FROM THE OUTER SHELL.

Find a different business, these people are a joke.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm using this motor in a 3D hobbies YAK and it has gobs of power, way more than is needed to 3D this plane. I'm using 6S and a 15x6E APC prop. I did have to replace the retaining clip on the shaft after a dozen flights or so but have not had any issues at all with the rest of the motor (no problems with magnets, etc.) at least yet. For the money it is quite the powerhouse.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Sweet motor, I installed it in a phoenix tiger 3 40 to 55 size
With turnigy AE 80amp speedie 6s turnigy 5000mah battery
13x8 apc prop it's pulling 1598watts at 64 amps only had the chance to fly it once (dam work keeping me from flying ) it has awesome
Power great vertical, when I pulled up it almost went out of sight
Can't wait to get out this weekend
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is NOT shown with any mounting hardware, but it does say which mounting hardware to order. Secondly if you look close at the motor picture you can clearly see that the mounting hardware needs to go were the motor shaft is, or you need to mount the motor inside the mounting interface so that the shaft is pointing forward.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello After putting this motor in my P40 ( 1650mm )on 6S with 16*10 prop it's power is very good. Only my motor became loud, checking motor and also this motor from NTM has loose magnets. HK you should do something about this because all bigger motors from NTM have this problem. In you're add saying only quality etc but loose magnets is the worse thing that can happen with you flying yours expensive plane....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello

After putting this motor in my P40 ( 1650mm )on 6S with 16*10 prop it's power is very good.
Only my motor became loud, checking motor and also this motor from NTM has loose magnets. HK you should do something about this because all bigger motors from NTM have this problem. In you're add saying only quality etc but loose magnets is the worse thing that can happen with you flying yours expensive plane....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor shows up with no mounting brackets or way to attach prop. Without these components the motor is worthless.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
An excellent motor, mounted into a Wot 4 XL with a 100amp ESC, original motor was a SC 120 4 stroke, don't really notice the difference other than the noise and cleanliness of the plane when flown, my view is ya can't go wrong with this...Great, keep up the good work HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
just got this motor ,it appears to be well made.have test run it to 40 amps so far no problem but would like to know what brand/type of prop hk used for their test data
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a strong Motor. I fit it in a 81" Piper. First I tested the engine in a test bench.
I use a 5S Zippy-LiPo 4500 mAH
Propeller 1: Turnigy Ultra-Light wood 15x6
54,3 A, 1005 Watt, 5,1 Kg Schub
Propeller 2: TGS - Sport 15x8
70,1 A, 1322 Watt, 4,5 Kg Schub
ESC: YEP 100 A 2-6S
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • NTM Prop Motor

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.