S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

MFO Prop promenade 50-60 270KV / 2400W

MFO Prop promenade 50-60 270KV / 2400W

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
540 g
SKU:
NTM5060-270

Combinez

et économisez plus
acc
Description
du

moteurs MFO Prop entraînement sont outrunners de performance solide comme le roc avec des enroulements serrés, des roulements de qualité, aimants correctement notés, stator équilibré et anneaux de flux, plus ils sont QC vérifié à 14 points, à partir de matériaux de traitement tout au long de test dyno final.

Parce que nous concevons et construisons ces moteurs complètement en interne (de 3D / 2D de dessin pour les matériaux d'approvisionnement, l'usinage, l'équilibrage, l'assemblage final et dyno) nous pouvons contrôler complètement la production et d'assurer la cohérence du produit de la conception à l'expédition du produit à vous. La suppression des intermédiaires hommes a voulu dire que nous pouvons conduire une meilleure valeur au marché et au détail de ces moteurs à l'usine (nos) prix! Tous les chiffres de performance sont réels et testés sur nos propres dynos automobiles.

Nos ingénieurs QC vérifier et d'équilibrer chaque moteur avant l'expédition à l'entrepôt HobbyKing.com.

Spécifications:
Modèle: MFO Prop série Entraînement 50-60 270kv
Kv: 270rpm / v
Courant max: 90A
Max Power: 2400W @ 29.6v (8S)
Shaft: 8mm
Poids: 454g
ESC: 100A
Nombre de cellules: 6s ~ 8s Lipoly
Trous de boulons: 30mm
Fil de Bolt: M4
Connexion: Bullet-connecteur 4mm

Prop de données de test:
17x8 - 22.2V / 1312W / 60A / 4,87 kg de poussée

Nota:
Les données de test Prop uniquement disponibles pour 17x8 prop @ 22.2V à ce moment, mettra à jour une fois plus grande des données de test de prop est disponible)

Product
Specifications

Informations supplémentaires

  • Référence:
    NTM5060-270
  • Brand:
    Non
  • Poids (g)
    540.00
  • Longueur
    137.00
  • Largeur:
    22.00
  • Taille:
    120.00
  • Kv ( rpm / v)
    270.00
  • Max Currents (A)
    90.00
  • (W ):
    2400.00
  • Longueur B ( mm ):
    60.00
  • Longueur Can D ( mm )
    40.00
  • Max Tension (V)
    30.00
  • Arbre A ( mm ):
    8.00
  • Unit Weight (g):
    454
  • Diamètre C ( mm )
    50.00
  • Longueur totale E ( mm )
    86.00
  • Résistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Sehr guter Motor, ich benutze ihn in einem Elektrischen Longboard mit 4S, ausgelegt auf 25km/h Vmax hat der Motor selbst nur mit 4S ein sehr gutes Drehmoment und ber Steigungen lacht er nur.
Auch in einem Elektroroller macht er sich grade Sehr gut, mit 6S und 30km/h Vmax wirft es einen fast vom Roller wenn man Vollgas gibt.
5/5 Kronen.

Very good Motor, i use this in an electric Longboard with an 4S Battery.
Build for 25km/h maximum Speed the power is much more then you need.
Hills are no longer a problem.
Even in a Scooter with a 6S Battery the Motor perfomance is great and at full power you almost fly of the scooter.
5/5 Crowns
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this and put it in a Falcon Trainer with a Turnigy 5000ma 6s battery and an 80A esc. Tugs it around just fine on a 17/10 prop and doesn't get more than luke warm (under 40A draw so not exactly over stretched) but must have had 30 odd flights and no drama, (bar my flying abilities). So far so good.
ps Towed a couple of gliders up with it as well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super Motor mit kleinen Mngeln.
Habe den Motor in einem 1,8 Meter Telemaster mit 3,5 Kg Fluggewicht verbaut.
Betrieben an 6 S 40C 4000mah mit APC Elektro 21*13.
Schleppe damit locker einen Segler mit 4,5 KG auf ber 300 Meter.
Nur die Kugellager des Motors machen nach kurzer Zeit leichte Gerusche
welche durchaus vernachlssigt werden knnen.
Top!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Set this motor up in my Seagull Yak54 .91 -1.20 glow model for an electric conversion. Previously had a Hacker 5060 580KV on 6s with a 16x8 prop and was just running too high amps and barely getting sport flying thrust out of it. So I decided to go with this motor, running on 8s and a 19x8 prop. Castle Ice 100 esc.

Maidened with this set up today and it was an awesome combo...until 5 of the magnets let loose. The only cool thing was the plane sounded like it was running a real radial engine as I brought it in to land.

Castle telemetry says it only peaked at 1500 watts, 51A. I think this motor was built on a Friday! Hence the one crown for quality. I'll glue in the magnets and it should be a great combo then!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this motor in my friction drive ebike. No problems so far (cycling for a week now), no magnets falling out. I'm only feeding 500W into it at the moment though. I'll write an update when I switch to 1 kW.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Amazing motor for the price.
Keep well vented because it gets warm otherwise.
Cant get anything close to this power for the price.
Using this on an E-board with 6 cell, gets me to 35Km\h.
Great buy
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have used this motor with the 90 size stick, using the 17x10 prop and a 100 amp speedy. It was very marginal but flew, I had two 5s 4500 packs in parralel which gave me 9000mah of usable amps. It would fly all day but not very fast. Realised after that this motor needs 6s so will try that as a minimum on next flight hopefully it will fly a bit more positively with more power. Plan is to use it for glider tow which should be fine once the volts have been lifted.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great construction...wish you guys had 8mm prop adapters in the US warehouse though.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very powerful for the weight, generally good motor but the magnets keep slipping loose, some times even the re-glued ones, such a pity as this would be a really good choice.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have give it 4 crowns as I have only had limited chance to try it so far but I am impressed. It is smooth and seems to do the job well. It is going in a 54" Sea fury, I am using this motor and a 4 blade prop (P-47 1600mm (PNF) - Replacement Props PRODUCT ID: 177000010) and an alloy spinner (Aluminium Prop Spinner 89mm / 3.5inch / 4 Blade PRODUCT ID: B89spinner-4) with a plush 80A esc. All purchased from Hobby king. Just Watt tested it and it is pulling 43A 950W on a 6s(22.2v).there is obviously lots of head room in the set up.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.