S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Série promenade MFO Prop 35-36A 910Kv / 350W

Série promenade MFO Prop 35-36A 910Kv / 350W

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
147 g
SKU:
NTM3536A-910

Combinez

et économisez plus
acc
Description
du
moteurs MFO Prop entraînement sont outrunners de performance solide comme le roc avec des enroulements serrés, des roulements de qualité, aimants correctement notés, stator équilibré et anneaux de flux, puits outil en acier, plus ils sont QC vérifié à 14 points, à partir de matériaux de traitement tout au long de dyno finale tester.

Parce que nous concevons et construisons ces moteurs complètement en interne (de 3D / 2D de dessin pour les matériaux d'approvisionnement, l'usinage, l'équilibrage, l'assemblage final et dyno) nous pouvons contrôler complètement la production et d'assurer la cohérence du produit de la conception à l'expédition du produit à vous. La suppression des intermédiaires hommes a voulu dire que nous pouvons conduire une meilleure valeur au marché et au détail de ces moteurs à l'usine (nos) prix! Tous les chiffres de performance sont réels et testés sur nos propres dynos automobiles.
Nos chèques QC mécaniciens et les soldes de chaque moteur avant l'expédition à l'entrepôt HobbyKing.com.

Modèle: MFO Prop lecteur 35-36A 910
Kv: 910rpm / v
Active: 10T
Courant max: 38A
Puissance: 350W
Arbre: 4 mm
Poids: 117g
trous de boulons: 18.9mm et 25mm
fil de Bolt: M3
ESC: 30A
Nombre de cellules: 3S Lipoly
Suggestion Prop: 10x4
Efficacité: 83%
Un grand plan moteur jusqu'à .30 taille.
Product
Specifications

Informations supplémentaires

  • Référence:
    NTM3536A-910
  • Brand:
    Non
  • Poids (g)
    147.00
  • Longueur
    100.00
  • Largeur:
    40.00
  • Taille:
    70.00
  • Kv ( rpm / v)
    910.00
  • Max Currents (A)
    35.00
  • (W ):
    350.00
  • Longueur B ( mm ):
    38.00
  • Longueur Can D ( mm )
    23.00
  • Max Tension (V)
    11.00
  • Arbre A ( mm ):
    4.00
  • Unit Weight (g):
    117
  • Diamètre C ( mm )
    35.00
  • Longueur totale E ( mm )
    58.00
  • Résistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Bought to power my Phoenix 2000 after the NTM 28-36 1000kv i had before burned, and also destroyed my ESC.
What a difference : far lower consummation and barely warm even after lot of solicitation, could be perfect choice if only it was lighter.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor, got it for my Skywalker1900, powers it very well, very well made, i have 3 NTM motors and cannot fault them. amazing value for money as well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very powerful on 3 or 4 cells. With a 10-6 APC but poor balance with no prop. I checked the prop hub for out of round and it seems fairly true. I see no indication that any balancing was done as you usually see some blue stuff inside the motor on the Turnigy line. FYI, I got a max 1800 gm thrust at 25 amp on 4 cells and 1300 at 18 amps in 3 cells. This was crude test with the motor taped to a digital scale and a pusher configuration. I don't understand why they make these things with the shaft out the back. Seems like it was meant for something else. Mine came in a plastic bag with no box or label. Same for the prop mount. Next time I need a cheap motor, I'll go with the Turnigy stuff as I think they are balanced better.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Sehr gute Verarbeitung,

ist voll und ganz zu empfehlen.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great little motor running a 13x4 prop
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
beautiful motor, solid to hold, built good, runs perfect low noise,
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this for an f550, im using 30 amp afro esc, naza v2, and slow fly Carbon mixed 10x4.5 props, with a 5200 4s multistar lipo, it can handle 10 minutes of mixed flying, and about 8 with a gopro and tarot gimbal, motors and esc cold on landing, i'm not sure if stock dji motors come down as cool as this do, i went ahead and put a larger gimbal and a black magic pocket, it handled 5 minutes "on a 5000 20c 4s zippy (flying 2 minutes with the multistar lipo was just insane, as the battery came down boiling)" amazing considering its overall 4 kg weigh.

I'd have to say it is great, except for a Very big issue which is, e-rings tend to loosen the shaft, luckily it hasn't made a mess, but you can see like 5mm of the bell coming out, so watch out
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fine motor but the motor shaft is too small. Engine bearings are good but the shaft is loose in the bearings. Assembled new axle from Dualsky and it fit perfectly in the bearings. Now the engine is good and goes silent._____Fin motor men motoraxeln r fr liten, ls inne i lagret. Provade en axel frn Dyalsky motorn och den passade perfekt i lagrena p NTM motorn. Monterade i axeln och nu gr motorn tyst.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A good motor, but beware that the mount and prop adapter are not included. Really wish they were.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mit einem 10x4 Prop. messe ich bei 10,4 V Netzteil entspricht etwa 3S Lipo mit dem HK010 Power Analyser 14,8 A bei 8200 U/min. was 148 Wh ergibt.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • NTM Prop Drive Series 35-36A 910Kv / 350W

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Customer files
Dyno Chart Télécharger maintenant [96kb]

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.