MFO Prop Drive Series 35-48A 1100kv / 640W

• Overall
• Quality
• Value

Very good product

Apr 23, 2017

Best motor in class

• Overall
• Quality
• Value

5

Nov 17, 2016

I'm using this motor with a 9x6 2blade nitro style prop, a pair of zippy 4s 2200mAh and a 60A HK esc.

• Overall
• Quality
• Value

Customer Rated

Jul 17, 2016

I'm using this motor with a 9x6 3blade nitro style prop, a pair of zippy 4s 2800mAh and a 60A HK esc. This setup is for a 2.2Kg - 72" bixler style FPV pusher plane and prop space was an issue. The autonomy is over 20 minutes and it's crazy powerful but becomes quite hot with this setup: about 60 degrees C on the casing. I don't have what it takes to measure the amperage but I'm fairly certain that this is too close to the motor's limits so I will change the prop for a 9x5 3blade GWS prop instead.

• Overall
• Quality
• Value

Certified Buyer Rated

May 06, 2016

Kraftvoller durchzugsstaker Motor. F das Geld ist der absolut zu empfehlen

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 20, 2016

I orderd 6 of these motors, none of them had perfect bearings, two being almost perfect and one being slightly louder than the other three. They will work just fine but some people like to complain about that sort of thing. The rotors are all pretty well balanced (most phones vibrate harder), I'm not going to complain about that. Windings also seem to be fine and well packed. I intend on running these with 10x5,5 props on 4S LiPO, but I'm currently missing some bigger ESCs so I cant properly load them down to properly test that config. Note that this is just a motor without any accessories which are sold extra. It's an OK product but Iplusll give it 4 stars because the bearings aren't quite there.

• Overall
• Quality
• Value

Customer Rated

Aug 09, 2015

Disappointed. Had one good flight with this motor and it has been a problem ever since that time. Overheats at power levels > 350 watts. The motor wires are very stiff and apparently have cracked, broken, or shorting out (with heat) at the entry to the bell. With better wire this could be a great motor.

• Overall
• Quality
• Value

Customer Rated

Jul 03, 2015

This motor is a monster on crack. Wide range of props and applications. I have used a 12x7, 13x4, 13x6, and more. Just hook it up to your watt meter and watch your numbers. These NTM motors are one of my first choices, great price too. I have put my way over price E-flite motor's on the shelf for these not because of price but because of power.

• Overall
• Quality
• Value

Customer Rated

Jun 14, 2015

Got this motor in my PZ Sukhoi after I ditched the stock setup. A lot of people are wondering if this motor can handle the listed amps and I'm happy to be the one who says it does, and then some. Throwing a 12x6 APC on a 4s brings the static amperage up to right at 70 amps. I have flown the absolute crap out of this motor and it barely comes down hot, running a 85 amp esc with plenty cooling for the motor though. My Sukhoi is now a completely out of sight vertical rocket that I would put up against anything in its size. For the price this motor is a gem among gems and the quality is what I've come to expect from the NTM line of outrunners.
-tayze

• Overall
• Quality
• Value

Customer Rated

Feb 17, 2015

Complessivamente un ottimo motore, potente e ben costruito.
Sicuramente un rapporto qualit prezzo veramente stellare.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 29, 2015

Strong performance on pusher configuration.