S'inscrire

Product Finder

Options

Useful links

 
[["US","AU","GB","DE"]]
S'inscrire

MFO Prop Drive Series 35-48A 1100kv / 640W

MFO Prop Drive Series 35-48A 1100kv / 640W

Now save enregistrer 0,00 € 0,00 €

18,58 €
Epuisé!
Rating:
Stock:
OUT OF STOCK
Poids
195 g
SKU:
NTM3548-1100

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Combinez

et économisez plus
acc
Description
du

moteurs MFO Prop entraînement sont outrunners de performance solide comme le roc avec des enroulements serrés, des roulements de qualité, aimants correctement notés, stator équilibré et anneaux de flux, puits outil en acier, plus ils sont QC vérifié à 14 points, à partir de matériaux de traitement tout au long de dyno finale tester.

Parce que nous concevons et construisons ces moteurs complètement en interne (de 3D / 2D de dessin pour les matériaux d'approvisionnement, l'usinage, l'équilibrage, l'assemblage final et dyno) nous pouvons contrôler complètement la production et d'assurer la cohérence du produit de la conception à l'expédition du produit à vous. La suppression des intermédiaires hommes a voulu dire que nous pouvons conduire une meilleure valeur au marché et au détail de ces moteurs à l'usine (nos) prix! Tous les chiffres de performance sont réels et testés sur nos propres dynos automobiles.

Nos chèques QC mécaniciens et les soldes de chaque moteur avant l'expédition à l'entrepôt HobbyKing.com.

Spécifications:
Modèle: MFO Prop Drive Series 35-48A 1100kv
Kv: 1100rpm / v
Active: 5
Courant max: 70A
Puissance: 560W @ 12v (3S) / 640W @ 15v (4S)
Shaft: 5mm
Poids: 173g
ESC: 80A
Nombre de cellules: 3s ~ 5s Lipoly
Trous de boulons: 18.9mm et 25mm
Fil de Bolt: M3
Connexion: 3.5mm Bullet-connecteur
Suggestion Prop: Prop données de test à venir bientôt!

Product
Specifications

Informations supplémentaires

  • Référence:
    NTM3548-1100
  • Brand:
    Non
  • Poids (g)
    195.00
  • Longueur
    80.00
  • Largeur:
    40.00
  • Taille:
    70.00
  • Kv ( rpm / v)
    1100.00
  • Max Currents (A)
    70.00
  • (W ):
    640.00
  • Longueur B ( mm ):
    51.00
  • Longueur Can D ( mm )
    34.00
  • Max Tension (V)
    19.00
  • Arbre A ( mm ):
    5.00
  • Unit Weight (g):
    173
  • Diamètre C ( mm )
    35.00
  • Longueur totale E ( mm )
    70.00
  • Résistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I'm using this motor with a 9x6 3blade nitro style prop, a pair of zippy 4s 2800mAh and a 60A HK esc. This setup is for a 2.2Kg - 72" bixler style FPV pusher plane and prop space was an issue. The autonomy is over 20 minutes and it's crazy powerful but becomes quite hot with this setup: about 60 degrees C on the casing. I don't have what it takes to measure the amperage but I'm fairly certain that this is too close to the motor's limits so I will change the prop for a 9x5 3blade GWS prop instead.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Kraftvoller durchzugsstaker Motor. F das Geld ist der absolut zu empfehlen
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I orderd 6 of these motors, none of them had perfect bearings, two being almost perfect and one being slightly louder than the other three. They will work just fine but some people like to complain about that sort of thing. The rotors are all pretty well balanced (most phones vibrate harder), I'm not going to complain about that. Windings also seem to be fine and well packed. I intend on running these with 10x5,5 props on 4S LiPO, but I'm currently missing some bigger ESCs so I cant properly load them down to properly test that config. Note that this is just a motor without any accessories which are sold extra. It's an OK product but Iplusll give it 4 stars because the bearings aren't quite there.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Disappointed. Had one good flight with this motor and it has been a problem ever since that time. Overheats at power levels > 350 watts. The motor wires are very stiff and apparently have cracked, broken, or shorting out (with heat) at the entry to the bell. With better wire this could be a great motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is a monster on crack. Wide range of props and applications. I have used a 12x7, 13x4, 13x6, and more. Just hook it up to your watt meter and watch your numbers. These NTM motors are one of my first choices, great price too. I have put my way over price E-flite motor's on the shelf for these not because of price but because of power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got this motor in my PZ Sukhoi after I ditched the stock setup. A lot of people are wondering if this motor can handle the listed amps and I'm happy to be the one who says it does, and then some. Throwing a 12x6 APC on a 4s brings the static amperage up to right at 70 amps. I have flown the absolute crap out of this motor and it barely comes down hot, running a 85 amp esc with plenty cooling for the motor though. My Sukhoi is now a completely out of sight vertical rocket that I would put up against anything in its size. For the price this motor is a gem among gems and the quality is what I've come to expect from the NTM line of outrunners.
-tayze
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Complessivamente un ottimo motore, potente e ben costruito.
Sicuramente un rapporto qualit prezzo veramente stellare.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Strong performance on pusher configuration.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am very happy with this motor. The dyno graphs are helpful but I think the motors are better than we would think looking to the graphs. So I have measured the 3 most important motor parameters. Kv was 1085/V; Io is 2.4A at 11V; Ri is 0.028 Ohms.
This gives a calculated max.Efficiency of 85pcnt at 12V and 13A.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I run this motor on 4s with a 10x10 APC and pull about 65a and 900w on a 1100mm Spitfire. I reach speeds just under 100mph with no problem. The motor gets pretty warm if I run WOT the entire time, but it takes the extra watts with no issue. Great motor for the cost!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • NTM Prop Drive Series 35-48A 1100kv / 640w

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.