S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

NX-4008-620kv Brushless Quadcopter Motor

NX-4008-620kv Brushless Quadcopter Motor

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
99 g
SKU:
NX-4008-620

Combinez

et économisez plus
acc
Description
du

Si vous êtes sérieux au sujet de votre performance quad-copters, alors ne cherchez pas plus loin que le NX4008.
Construit avec haut de gamme 45SH aimants, comptez un pôle élevé et support moteur sur mesure, ce quad-moteur est conçu exclusivement pour les applications multi-rotor.
Le NX-4008 intègre un économiseur accessoire pour GWS accessoires de style et un bâti en aluminium de montage pour une installation rapide et facile sur votre cadre de quadcopter.

Ce n'est pas un avion outrunner modfied. Il a été conçu à partir du sol pour copters quad.

spécification
Kv: 620rpm / v
Active: 16T
Résistance: 0.129Rm
Idle actuelle: 0.8A
Can Taille: 45mm
Can Longueur: 14mm
Shaft: 3mm (Comprend économiseur Prop montage pour GWS accessoires de style)
ESC suggérée: 30A
Évalué Watts: 180W
Poids: 79g
Nombre de cellules: 3 ~ 4S Lipoly


Adaptateur Prop costume 5mm hélice

Product
Specifications

Informations supplémentaires

  • Référence:
    NX-4008-620
  • Brand:
    Non communiqué
  • Capacité ( mAh )
    Non
  • Poids (g)
    99.00
  • Longueur:
    160.00
  • Largeur:
    52.00
  • Taille
    100.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered 4 of these for a Crossfire 2 quadcopter. As another review says, the lack of screws was kind of annoying. These motors look beautiful on the quadcopter, have a lot of power and are easy to install once you get the M2.5 screws. I'm not sure about the price, maybe cheaper motors perform just as well, but I haven't tested anything else so I can't really comment on that.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have received my 4 engines today, and two were having problems with unglued magnet and two magnet brokens... Have to repair them without having seen them turn ! That's not a good way to have a good feeling... Please take care of that HK !!!
Engine bigger than attended but feel ok. Bearing seems tiny for such a big engine and 12' props, I have to take care of that. ESC to be soldered and tests to comes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great Motor See the Video:

https://www.youtube.com/watch?v=LBWlbGJWjpA&feature=player_detailpage

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I desperately need shafts and prop adapters for these. The ones that come with the motor are pretty fragile. I wish Hobby King would tell us which ones to buy. Or better yet, have an accessory kit for this motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The propsavers that come with these are made from soft aluminium and are absolute rubbish. Two of them have snapped within two days, so now I can't fly at all.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bonjour, Je voudrais savoir si vous pensez que je peux utiliser ce moteur avec du 5S (18,5 volts) ? Par ailleurs est-ce que ce moteur peut entraner des hlices en 14"
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very fragile, I wished the made it a bit heavier, and more robust. Well Balanced, but bad Bearings, need to be replaced soon. some run noisy out of the box. Shafts are quite soft, bend on any ground Contact.

Spare Shafts would be URGENTLY needet.

Also a good Motor for a FPV Pusher as it runs very smoothly. No good for Planes where the Prop easily touches the Ground, here this Motor wont make you happy. I use it on 4s with GWS 3Blade 1065 Props
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Optical nice Motor good Magnets and electrical Data, but the Motorhousing is poor and rapidly bend.
the Bearings and the Shaft to small for 12" or 13" Propellers.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Multirotor motor with very good quality and price
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For $31 you would think they could have included some screws. Being M2.5 not M3, they are not exactly a common size.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.