New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

OrangeRx Ouvrir LRS 433MHz émetteur 1W (JR / Turnigy Compatible)

OrangeRx Ouvrir LRS 433MHz émetteur 1W (JR / Turnigy Compatible)

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

29,09 €
Statut:
En stock.
SKU:
9171000284-0
WANT FREE SHIPPING? Click here to find out more!

Les toutes nouvelles OrangeRx ouvertes LRS Module TX est un module émetteur open source qui peut être programmé pour utiliser votre choix du protocole et de tout canal dans la gamme de 400 ~ de 460MHz. Il est un système d'émetteur RF entièrement personnalisable par l'utilisateur. Il peut même être programmé pour utiliser des fonctionnalités supplémentaires telles que la télémétrie lorsqu'il est utilisé avec le module OrangeRx OpenLRS Rx.

Le OrangeRx Ouvrir LRS TX Module une unité très polyvalente idéale pour vos projets personnalisés.
Il utilise une unité 1000mW RF et un processeur Atmega328 avec Arduino Bootloader vous permettant de télécharger des codes pré-écrits ou écrivez votre propre pour répondre à vos besoins de l'émetteur.

Le code par défaut utilise la fréquence 3 saut de canal. Si vous souhaitez utiliser un protocole différent, vous pouvez écrire vos propres codes Hopping ou simplement télécharger l'un des nombreux OpenLRS pré-écrite des jeux de codes déjà disponibles.

Caractéristiques:
• Prise en charge de 3.3v FTDI pour une programmation facile (NE PAS utiliser 5V adaptateurs série / AVRISP)
• Port série pour le firmware téléchargement et l'application de télémétrie
• Port I2C pour les applications de capteurs (Wii Motion Plus Headtracker base)
• Processeur 16Mhz Atmega328 avec Arduino bootloader compatible Pro Mini.
• régulateur de tension de 3.3v de LM2937
• connecteur UFL entre PCB et de l'antenne
• Buzzer pour information sonore
• sortie 1000mW, sauts de fréquence et la capacité des centaines de fonctionnalités

Spécifications:
Compatibilité: émetteurs basés modules compatibles 5 broches JR
Fréquence: 433MHz
Entrée de tension: 6,8 ~ 12VDC
IC: ATmega328P
Puissance: 1000mW
Gamme: système Gamme complète

Comprend:

OrangeRx OpenLRS Module Tx (JR compatible)
Antenne

* Remarque: La configuration et l' utilisation de l' Open LRS nécessite des compétences en informatique de programmation et de l' expérience Arduino de base. Ce n'est pas un système "plug and play". Voir le document ci-joint sous l'onglet "Fichiers" pour les ressources sur information de programmation, les téléchargements de firmware et plus encore.

* Note: LRS ouvert utilise le soutien 3.3v de FTDI, NE PAS utiliser un adaptateur / ou des dommages AVRISP 5V série se produira.

* Note: S'il vous plaît vérifier avec les autorités locales concernant le fonctionnement de cet équipement avant d'acheter. Règlement sur ​​la puissance de sortie, les fréquences utilisables et des licences »pour fonctionner varient de région à région.

* Note: Ce ne sont pas un produit original de marque Arduino.

  • UGS 9171000284-0
  • Brand Orange
  • Capacité ( mAh ) -
  • Poids 78.0000
  • Longueur 90.00
  • Packaging Width 35.00
  • la taille 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This was the best emitter that could even be used as receiver using the Ultimate LRS software. Compatible with Ardupilot telemetry, it provides an awesome range.
Considering that you don't even need the hkpilot telemetry set when you use these, I can say the value for the price is amazing. Please HK we need restock! Check the ultimate LRS website to see the improvments that you should make to this module to get the best range possible.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This was the best emitter that could even be used as receiver using the Ultimate LRS software. Compatible with Ardupilot telemetry, it provides an awesome range.
Considering that you don't even need the hkpilot telemetry set when you use these, I can say the value for the price is amazing. Please HK we need restock! Check the ultimate LRS website to see the improvments that you should make to this module to get the best range possible.

Best LRS option considering its price in the market so adviced.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Best LRS option considering its price in the market so adviced.

good for mods with my apm. nice

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good for mods with my apm. nice

these have crap range out of the box but all you need is to turn the stock antenna into a half wave whip all you need is a wire and antenna tube start at 350mm and slowly cut it back checking rrsi dont cut shorter than 310mm use a quarter wave on rx i left the rx in my house and walked half way across town without lossing signal i didnt go to the max range ill never fly that far away

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

these have crap range out of the box but all you need is to turn the stock antenna into a half wave whip all you need is a wire and antenna tube start at 350mm and slowly cut it back checking rrsi dont cut shorter than 310mm use a quarter wave on rx i left the rx in my house and walked half way across town without lossing signal i didnt go to the max range ill never fly that far away

WARNING! I bought 3 of these orange lrs modules and in ALL of them the ground plane on the pigtail was broken. If you are getting 200-300m range probably yours is broken too. And here is the real fun part: You probably burned the TX at this point(practically run the module without antenna)

I strongly recommend running a continuity test on the pigtail before ever turning the module on. Also if you have an soderin iron put dab of soder on SMA's pins. That was botced one of my modules too. Seriously messed up QC

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WARNING! I bought 3 of these orange lrs modules and in ALL of them the ground plane on the pigtail was broken. If you are getting 200-300m range probably yours is broken too. And here is the real fun part: You probably burned the TX at this point(practically run the module without antenna)

I strongly recommend running a continuity test on the pigtail before ever turning the module on. Also if you have an soderin iron put dab of soder on SMA's pins. That was botced one of my modules too. Seriously messed up QC

After a couple of months I have been trying to get my OpenLRS Orange RX 1W TX to work correctly. It's still not, at least not as good as you'd expect it to work.
No problem with the flashing process (OpenLRSNG) and binding, so far everything was fine. However, even with decent antennae (SR771 on TX and Sander on RX), the maximum range I could achieve was 1.8Km, beyond that the RX went into failsafe. Not even close to what you can get with FrSky system (I have achieved 2.5Kms easily).
I also had a defective pintail that was replaced by an SMA cable directly soldered onto the board. At full power, the transmitting power is ~420mW which is supposed to give ~50Km range with good antennae.
A friend of mine had the same setup and didn't manage to get it to work correctly having a range even worse than mine. We decided to go back to FrSky which works way beyond what you can expect of a 2.4G system.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After a couple of months I have been trying to get my OpenLRS Orange RX 1W TX to work correctly. It's still not, at least not as good as you'd expect it to work.
No problem with the flashing process (OpenLRSNG) and binding, so far everything was fine. However, even with decent antennae (SR771 on TX and Sander on RX), the maximum range I could achieve was 1.8Km, beyond that the RX went into failsafe. Not even close to what you can get with FrSky system (I have achieved 2.5Kms easily).
I also had a defective pintail that was replaced by an SMA cable directly soldered onto the board. At full power, the transmitting power is ~420mW which is supposed to give ~50Km range with good antennae.
A friend of mine had the same setup and didn't manage to get it to work correctly having a range even worse than mine. We decided to go back to FrSky which works way beyond what you can expect of a 2.4G system.

Works excellent with my Turnigy 9x (ER9X firmware). Flashed with the newest version of openLRSng it provides lots of cool features, such as Spectrum Analyzer or telemetry (orange RX module can transmit data back to TX module which beeps on lost packets). Overall, OrangeRx Open LRS is one of the best TX modules you can buy for your JR or 9x transmitter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works excellent with my Turnigy 9x (ER9X firmware). Flashed with the newest version of openLRSng it provides lots of cool features, such as Spectrum Analyzer or telemetry (orange RX module can transmit data back to TX module which beeps on lost packets). Overall, OrangeRx Open LRS is one of the best TX modules you can buy for your JR or 9x transmitter.

There is no information regarding whether the unit requires to be flashed with the firmware in order for the unit to work. So, I tried to bind it to a OrangeRx open lrs 9 channel receiver. It never made the five beeps and never bound. After making 20 attempts to get the firmware updated (it would never connect), using the Orange RX firmware update kit, I noticed the unit LED's were dead and I am assuming the unit is now dead. Not worth spending $20 to ship it back to China only to have to wait for several months to get another one back, assuming HK will actually warranty it.
Waste of money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There is no information regarding whether the unit requires to be flashed with the firmware in order for the unit to work. So, I tried to bind it to a OrangeRx open lrs 9 channel receiver. It never made the five beeps and never bound. After making 20 attempts to get the firmware updated (it would never connect), using the Orange RX firmware update kit, I noticed the unit LED's were dead and I am assuming the unit is now dead. Not worth spending $20 to ship it back to China only to have to wait for several months to get another one back, assuming HK will actually warranty it.
Waste of money.

Incorrect part sent to me. One month on, still waiting for part to be authorised and delivered.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Incorrect part sent to me. One month on, still waiting for part to be authorised and delivered.

Great little thing here. I have a FrSky DF combo which I'm very satisfied with, but aiming for longer range brought me to this and adding also the fun setting it up, choosing and flashing firmwares, the possibility to flash it as a receiver and have 1W telemetry in both ways, makes this module unbeatable.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little thing here. I have a FrSky DF combo which I'm very satisfied with, but aiming for longer range brought me to this and adding also the fun setting it up, choosing and flashing firmwares, the possibility to flash it as a receiver and have 1W telemetry in both ways, makes this module unbeatable.

  1. 1
  2. 2
  3. 3
Customer files
Conexión externa FTDI al receptor Download [3366]
how connect tx module to hk usb tool Download [2623]
Flash OrangeRX LRS FW and Taranis Download [1236]
this document helped me alote Download [164]
ULRS - Go for it Download [773]
better photo of pcb Download [4350]
No File Name Download [2054]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save