S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • USA

OrangeRx R415 DSM2 Compatible 4Ch Micro 2.4GHz

OrangeRx R415 DSM2 Compatible 4Ch Micro 2.4GHz

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
29 g
SKU:
R415

Combinez

et économisez plus
servo
acc
Description
du

Compatible avec tous les émetteurs DSM2.

Un petit foamie parfait ou récepteur intérieur. Super petit et très léger!
La nouvelle gamme de récepteurs OrangeRx sont construits en utilisant des composants d'origine et MCU et avec l'état de l'automatisation art SMT pour assurer un produit de qualité à chaque fois.
Tous les récepteurs OrangeRx sont QC testés avant de quitter l'usine.
Le OrangeRx fonctionnera avec tout émetteur 2.4Ghz compatible DSM2

Le OrangeRx R415 4ch Micro est 2.0G seulement en poids et en taille 29x15x8mm. Idéal pour Micro avions, foamies intérieur et de petits parkflyers.

Principales caractéristiques.
poids 2.0g Super léger!
Tension: 3.6 ~ 9v
Compatible avec DSM2 1024/2048 radio de l'avion et des systèmes de modules
4 canaux
Design compact 29x15x8mm
antenne 29mm court pour le montage dans presque tout endroit.
Micro Molex 3 Les conectors Pin avec 1.25mm Espacement

Compris.
OrangeRx R415 4ch Micro DSM2 récepteur Compatible

*Remarque:
1) Ce n'est pas un produit Spektrum DSM2, ni une copie d'un produit Spektrum DSM2.
La marque Spektrum et DSM2 est une marque de Horizon Loisirs Etats-Unis.
2) Ce n'est pas un produit souterrain Spektrum faux marché noir. qualité OrangeRx est garantie.
3) Acceptée par le MAAA en Australie, voir le MAAA MOP58 à titre indicatif

Product
Specifications

Informations supplémentaires

  • Référence:
    R415
  • Brand:
    Non communiqué
  • Capacité ( mAh )
    Non
  • Poids (g)
    29.00
  • Longueur:
    59.00
  • Largeur:
    5.00
  • Taille
    45.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 4 of this receiver, only 1 work. The other 3 has a brownout issue and crashed my brand new plane. Always do range test first before flying and don't use the receiver if it failed on range test. I already crashed my plane before I learned this. I hope this will not happen to others. The good thing is hk gave me credit points for all 3 that have failed. Unfortunately I crashed my aircore airframe because of it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
small compact dsm 2compatible! im using it for small indoor toys

micro
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Small and light receiver. Suited for micro servo connector sold here. Ex. HK-5330. Work from 3V up.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice little receiver, I've bought a few of these. The HK micro 1.7g servos plug straight in (micro-Molex 'picoblade' connectors) and the pin assignments are shown on the label of the Rx so you can check that your servos match the pinout.

Beware the relatively high minimum operating voltage for 1S applications - I've used these in gliders, with just the servo loads to worry about, and had no problems at all with brownouts or range on 1S, but if you're also driving a motor, most ESCs don't cut the throttle until the voltage drops to around 3.0V, and this Rx is only specified to run down to 3.6v.

HK sell a voltage booster that can (allegedly) supply about an amp at 5.0v from 1S, but if you want to supply the receiver via that and the servos/ESC straight from the LiPo, you'll need to sort out level matching on the signal connections. For 1S powered models with motors, the SuperMicro range of receivers sold by HK now include some DSM2 models with built-in ESC etc, which cost more but probably work out simpler.

Overall, these little receivers are brilliant value and perform very well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A fantastic little RX! I used this, paired with Hobbyking 3A Single Cell ESC (Product=11885), to convert a Ky0sh0 minium warbird which had numerous TX/RX issues. Was fairly close to a PNP refit.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good receiver, good quality....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bon produit rein a dire
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
perfect little receiver for my 900mm mini DLG glider. using Molex to servo-lead adapters. runs on 1s or 2s Lipos. outputs were lableld correctly. had to have power to battery input in order to bind. very nice. Roger
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
worked a treat but no leads available.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This receiver is worthless. It's impossible to bind the receiver to a Spektrum DM8 HF Module. I tried 2 different R415 without success. After long brainstorming with other users I can exclude all other error sources.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
servo
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.