New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

OrangeRx commutable 2.4GHz Module émetteur (Futaba Compatible)

OrangeRx commutable 2.4GHz Module émetteur (Futaba Compatible)

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

30,28 €
Statut:
En stock.
SKU:
9171000538-0
WANT FREE SHIPPING? Click here to find out more!

Le module émetteur 2.4Ghz commutable OrangeRx offre un moyen simple et pratique d'utiliser votre émetteur compatible Futaba basé sur un module. Contrairement à des modules standards qui ont un protocole fixe cette unité peut être commutée entre DSM2 (1024 / 22ms, 2048 / 11ms), DSMX (22ms, 11ms) ou Walkera protocoles compatibles. La puissance de sortie est également sélectionnable à 4 niveaux. Il suffit de remplacer votre module d'achat d'actions avec ce module commutable et vous êtes prêt à se lier à des récepteurs compatibles DSMX, DSM2 ou Walkera.

Une autre caractéristique de ce superbe module est qu'il a la cartographie de canal sélectionnable pour les deux AETR ou TAER.

Caractéristiques:
• 100% compatible Futaba (fonctionne avec tout émetteur à base de module compatible Futaba)
• 5 modes commutables: DSM2 1024 / 22ms, DSM2 2048 / 11ms, DSMX 22ms, DSMX 11ms, Walkera
• 4 commutateur sélectionnable sorties de puissance
• Facile à accéder à bouton d'appairage
• Mode de contrôle de Gamme
• Cartographie de canal sélectionnable

Spécifications:
Compatibilité: standard Futaba émetteurs à base de modules-5 broches
Protocole 2.4Ghz: DSMX / DSM2 / Walkera Compatible
Entrée: PPM ~ 5V
Gamme: système Gamme complète

Comprend:
OrangeRx DSMX / DSM2 / Walkera module émetteur 2.4Ghz compatible (Futaba compatible)
Antenne 2.4Ghz

Module utilise un ID global unique pour la liaison. En cas de problèmes avec d'autres récepteurs de marque de liaison sur le bouton "Change ID" sur le module pour changer l'ID du module à une autre valeur unique réservée à ce module.

Il y a plus de 4 milliards de ID unique attribué aux modules OrangeRx.

*Remarque:
1) Ce n'est pas un Spektrum DSM2 / X, produit Walkera, ni une copie d'un Spektrum DSM2 / X, produit Walkera.
La marque Spektrum et DSM2 / X est une marque de Horizon Loisirs Etats-Unis.
2) Ce n'est pas un produit souterrain Spektrum faux marché noir. qualité OrangeRx est garantie.

  • UGS 9171000538-0
  • Brand Orange
  • Capacité ( mAh ) -
  • Poids 72.0000
  • Longueur 90.00
  • Packaging Width 40.00
  • la taille 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I received my module today and installed it on my Futaba FF8. Binding works fine afterreading the instructions... However, couldn't use the automatic mode with my Vapor Lite BNF model, so I had to move a few switches. Again, it is easy... if you read the manual before!
J'ai reçu mon module aujourd'hui et je l'ai installé dans ma Futaba FF8. Le binding fonctionne sans problème en suivant les instructions. En revanche, le mode automatique ne fonctionnant pas avec mon Vapor Lite BNF, j'ai dû utiliser les switchs du module. Rien de compliqué... si on lit la notice avant!

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

I received my module today and installed it on my Futaba FF8. Binding works fine afterreading the instructions... However, couldn't use the automatic mode with my Vapor Lite BNF model, so I had to move a few switches. Again, it is easy... if you read the manual before!
J'ai reçu mon module aujourd'hui et je l'ai installé dans ma Futaba FF8. Le binding fonctionne sans problème en suivant les instructions. En revanche, le mode automatique ne fonctionnant pas avec mon Vapor Lite BNF, j'ai dû utiliser les switchs du module. Rien de compliqué... si on lit la notice avant!

BE AWARE - SW2 (AETR/TAER mapping) appears not to be recognised during bind process!!! ....... Tried binding to a a Spektrum AR636 – which registers failsafe settings during the bind process....... The ESC doesn’t “arm" at the end of the bind process (suggesting “non-zero” input), but consistently arms OK when TX power is cycled off & on again in normal mode..... The channels then map OK (e.g. Futaba CH3 throttle stick maps correctly to ch1 on the receiver).... BUT on testing RX failsafe, motor powers up / continues running....... Investigation reveals that in bind mode the TX's channels don’t appear to be re-mapped by SW2 being on - the Futaba's CH1 (aileron stick - which is, off course, at rest in mid position), is read by Channel 1 on the RX - connected to ESC - Thus the RX registers "half throttle" as the failsafe setting.... Once discovered, easily cured - hold the aileron stick hard left (in my case) during binding.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

BE AWARE - SW2 (AETR/TAER mapping) appears not to be recognised during bind process!!! ....... Tried binding to a a Spektrum AR636 – which registers failsafe settings during the bind process....... The ESC doesn’t “arm" at the end of the bind process (suggesting “non-zero” input), but consistently arms OK when TX power is cycled off & on again in normal mode..... The channels then map OK (e.g. Futaba CH3 throttle stick maps correctly to ch1 on the receiver).... BUT on testing RX failsafe, motor powers up / continues running....... Investigation reveals that in bind mode the TX's channels don’t appear to be re-mapped by SW2 being on - the Futaba's CH1 (aileron stick - which is, off course, at rest in mid position), is read by Channel 1 on the RX - connected to ESC - Thus the RX registers "half throttle" as the failsafe setting.... Once discovered, easily cured - hold the aileron stick hard left (in my case) during binding.

Buy this to test on 3PK, it works perfectly with air receiver.. Thanks HobbyKing, now I can share my orangerx air receiver with my ground force

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Buy this to test on 3PK, it works perfectly with air receiver.. Thanks HobbyKing, now I can share my orangerx air receiver with my ground force

Good value especially in relation to to latest Futaba compatible module.Mine binds to DSM2 and DSMX Orange receivers as well as Spektrum brand receivers.

Tiny caveat remember that there is no model memory interlock so you need to be certain that correct model is selected

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good value especially in relation to to latest Futaba compatible module.Mine binds to DSM2 and DSMX Orange receivers as well as Spektrum brand receivers.

Tiny caveat remember that there is no model memory interlock so you need to be certain that correct model is selected

Nice concept, i have both types of rx lying, bound them to it, easy as breeze

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice concept, i have both types of rx lying, bound them to it, easy as breeze

It is great module. I applied this module to 14sg and getting successful bind with ncpx and super cp without problem.
case of ncpx, needing to use the manual selection to dsmx protocol by jumper switch

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is great module. I applied this module to 14sg and getting successful bind with ncpx and super cp without problem.
case of ncpx, needing to use the manual selection to dsmx protocol by jumper switch

Customer files
Manual Download [178]
Orange Futaba Tx module Switchable manua Download [465]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save