New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Parkjet 2 High Speed ​​Wing EPO 550mm (PNF)

Parkjet 2 High Speed ​​Wing EPO 550mm (PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
9040000002
WANT FREE SHIPPING? Click here to find out more!

Construit pour la vitesse, mais avec une charge alaire faible, le Parkjet 2 crie à travers le ciel et peut encore glisser pour un atterrissage lent. Le Parkjet 2 a une enveloppe de vol incroyablement large.

Le nouveau et amélioré Parkjet 2 comprend un moteur puissant 2623-4500kv brushless outrunner, 15A ESC et une fibre de verre renforcée amélioration support moteur donnant à ce modèle un sérieux coup de pouce de la performance.

Le HK Parkjet 2 est un parc-dépliant fantastiquement rapide avec des caractéristiques de vol lent très docile et prévisible, il est facile de lancements de terre et de la main sont faites simple avec le doigt inférieur détient qui marquent également l'emplacement CG. Les ailes principales sont renforcées par des tiges en fibre de carbone et le fuselage peut accepter une grande variété de batteries de 800 mAh 1300 mAh jusqu'à!

Cette version du Parkjet 2 est au format "Plug and Fly" avec le moteur, ESC et les servos tous les pré-installés. Vous aurez simplement besoin d'ajouter votre propre système de radio et de batteries pour compléter ce modèle.

S'il vous plaît noter: ce servomoteurs et ESC ont des micro fiches de réception.

Caractéristiques:
• "Plug and Fly" Format - simplement ajouter votre propre système de radio et batteries
• Construction en mousse EPO ultra-durable
• enveloppe de vol extrêmement large
• 4500kv puissant système d'alimentation sans balais pré-installé

Spécification:
Envergure: 550mm
Longueur: 415mm
Fying Poids: 210g
Moteur: BL2623-4500kv (Inclus)
ESC: 15A micro bouchon (Inclus)
Prop: EP-4530 (inclus)
Servos: 4.5gx 2 micro bouchon (Inclus)

Obligatoire:
3 système radio ~ 4 canaux (émetteur et récepteur adapté pour les micro-fiches)
batterie 2S 7.4V 800 ~ 1300mAh Lipoly
colle de mousse de sécurité

  • UGS 9040000002
  • Brand -
  • Capacité ( mAh ) -
  • Poids 1591.0000
  • Longueur 590.00
  • Largeur 100.00
  • la taille 490.00
  • Parkjet 2
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

i already converted my Parkjet 2 High Speed Wing EPO 550mm with 3 cells set up using 2200kv motor with 30 amp esc and propeller 6x4 and battery 900mah 60c. Flying time is about 3 minutes with half throttle. Esc,motor and battery cold and not sthretch. Powerfull and very enjoy. CG also ok and no need to to trim.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i already converted my Parkjet 2 High Speed Wing EPO 550mm with 3 cells set up using 2200kv motor with 30 amp esc and propeller 6x4 and battery 900mah 60c. Flying time is about 3 minutes with half throttle. Esc,motor and battery cold and not sthretch. Powerfull and very enjoy. CG also ok and no need to to trim.

The Parkjet is a well-made model which tracks quite nicely for its size! It is quite twitchy, and therefore is by no means a beginner plane, but it's good fun for someone looking for a bit of a challenge! This plane rolls very quickly and can perform various manoeuvres with little trouble. The canopy fits nicely, but has a tendency to fly off, but is easily fixed by a little bit of velcro. I used 80/20 DR/Expo on this model to get it flying comfortably and smoothly, but 100pcnt rates work well for a phenomenal roll rate! This is a strong intermediate plane, and will provide plenty of learning experience.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The Parkjet is a well-made model which tracks quite nicely for its size! It is quite twitchy, and therefore is by no means a beginner plane, but it's good fun for someone looking for a bit of a challenge! This plane rolls very quickly and can perform various manoeuvres with little trouble. The canopy fits nicely, but has a tendency to fly off, but is easily fixed by a little bit of velcro. I used 80/20 DR/Expo on this model to get it flying comfortably and smoothly, but 100pcnt rates work well for a phenomenal roll rate! This is a strong intermediate plane, and will provide plenty of learning experience.

My "PNF" version (no stabi) also arrived.
I also got this strange 5-wire connectors and an ESC with 3 wire JST 1.25 pitch.
So I replaced both servos ESC (servos 4,3g and HK-20Ah ESC), using an not a stabiliced RX.
Also I put a little carbon rowings / rods under the rudders and under the wing and some perlon textile ribbons (with EPO glue) on the fuselage for reinforcement.

So this was -NOT- PNF.

BUT ...

The Parkjet 2 flies very well fast. :-)
And this jet can be stall landed with fully drawn rudder ( 25 degrees)! :-)
That's a lot of fun. :-)

(My COG is 3 mm in front of the center of the handhold holes, weight is 240g with LiPo 850 2S).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My "PNF" version (no stabi) also arrived.
I also got this strange 5-wire connectors and an ESC with 3 wire JST 1.25 pitch.
So I replaced both servos ESC (servos 4,3g and HK-20Ah ESC), using an not a stabiliced RX.
Also I put a little carbon rowings / rods under the rudders and under the wing and some perlon textile ribbons (with EPO glue) on the fuselage for reinforcement.

So this was -NOT- PNF.

BUT ...

The Parkjet 2 flies very well fast. :-)
And this jet can be stall landed with fully drawn rudder ( 25 degrees)! :-)
That's a lot of fun. :-)

(My COG is 3 mm in front of the center of the handhold holes, weight is 240g with LiPo 850 2S).

i bought this park jet and my comments is, this not recommende to beginer pilot because it so hard to hand launch because the electronics setting is not enough to bring this thing climb and must have someone to launch for you.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i bought this park jet and my comments is, this not recommende to beginer pilot because it so hard to hand launch because the electronics setting is not enough to bring this thing climb and must have someone to launch for you.

DON'T BUY THE PNF version of this model. Mine arrived today, and whilst initial impressions were good (well packed, spare prop, even some 5min epoxy), problems soon emerged. The servos have micro connectors with 5 wires, the esc has a micro connector. In the RCgroups discussion, you'll find that these servos will work only with the 3 axis stabiliser. Secondly, no c/f rods are to be found fitted to the wings as reinforcement. The model that was sent to me does not match the description above. I'm normally happy with HK products, but this is definitely not PNF, more like false advertising.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

DON'T BUY THE PNF version of this model. Mine arrived today, and whilst initial impressions were good (well packed, spare prop, even some 5min epoxy), problems soon emerged. The servos have micro connectors with 5 wires, the esc has a micro connector. In the RCgroups discussion, you'll find that these servos will work only with the 3 axis stabiliser. Secondly, no c/f rods are to be found fitted to the wings as reinforcement. The model that was sent to me does not match the description above. I'm normally happy with HK products, but this is definitely not PNF, more like false advertising.

This is nice plane with a lot of good opinions on RC Groups, but this PNF version w/out stabiliser makes no sense at all. Included servos may run ONLY with original stabiliser, so they are useless with any standard or micro RX or with any other stabiliser like Orange. This model shall be described as ... with motor and ESC, because servos need immediate exchange....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is nice plane with a lot of good opinions on RC Groups, but this PNF version w/out stabiliser makes no sense at all. Included servos may run ONLY with original stabiliser, so they are useless with any standard or micro RX or with any other stabiliser like Orange. This model shall be described as ... with motor and ESC, because servos need immediate exchange....

Very nice wing, and very fast : a litte too fast for my second airplane model. It is a rebranded version of Skyartec Mini Skyfun ;-) Quality is good but some features are not so well designed :
- i had tu put spacers on the motors mount's screws because it blocked the rotor of the motor when fully screwed (you can also shorter the screws of course)
- when you crash or land hard on the nose, all the front twist up and the hinge has to be glued after a few times
- when you land, the underwing wiring of the servos is very exposed and this is the really bad point of this plane : i have broken 4 servos in only one month...
Turnigy T531-BBD servos fits very well with a 10cm extension cable and have the same mecanical caracteristics than the stock one ;-)
I think i will made landing protections like rails with 6mm depron before my next fly...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice wing, and very fast : a litte too fast for my second airplane model. It is a rebranded version of Skyartec Mini Skyfun ;-) Quality is good but some features are not so well designed :
- i had tu put spacers on the motors mount's screws because it blocked the rotor of the motor when fully screwed (you can also shorter the screws of course)
- when you crash or land hard on the nose, all the front twist up and the hinge has to be glued after a few times
- when you land, the underwing wiring of the servos is very exposed and this is the really bad point of this plane : i have broken 4 servos in only one month...
Turnigy T531-BBD servos fits very well with a 10cm extension cable and have the same mecanical caracteristics than the stock one ;-)
I think i will made landing protections like rails with 6mm depron before my next fly...

Cannot wait for this item to arrive

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Cannot wait for this item to arrive

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save