S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

PBY Catalina 1380mm (ARF)

PBY Catalina 1380mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
2535 g
SKU:
CATA607-KIT

Combinez

et économisez plus
esc
battery
  • Turnigy 2200mAh 3S 20C Lipo Paquet

    Turnigy 2200mAh 3S 20C Lipo Paquet

    Vous économisez enregistrer 2,22 € 2,22 €

    Special Price 6,77 € 6,77 €

    You save enregistrer 2,22 € 2,22 €

    Prix normal  8,99 €

  • Turnigy nano-tech 2200mah 3S 25 ~ 50C Lipo Paquet

    Turnigy nano-tech 2200mah 3S 25 ~ 50C Lipo Paquet

    Vous économisez enregistrer 3,26 € 3,26 €

    Special Price 11,87 € 11,87 €

    You save enregistrer 3,26 € 3,26 €

    Prix normal  15,13 €

servo
acc
Description
du

La Catalina est sans doute le plus célèbre bateau volant jamais construit, et certainement l'un des plus largement utilisé, cette icône de l'aviation a vu le service avant et après WW2 à la fois avec les opérateurs militaires et civils. Cet avion extraordinaire a été utilisé pour les pompiers, chasse U-Boats, Sea Air R esc ue, la liste est longue et sur.

Ceci est un excellent modèle de taille avec une charge alaire très faible qui peut être piloté hors de l'eau ou de l'herbe, il est très facile à piloter et il l'habitude de sauter la banque! Pour compléter ce modèle , vous aurez besoin de 4 x servos 9g et 2 moteurs brushless bell & 2 ESC s. Pour voler hors de l'eau, il y a un gouvernail de l'eau et des ailes flotteurs, retirez simplement pour voler de l'herbe!

Retrait de la canopée magnétique révèle une grande plaque de couche pour le montage tout votre équipement de RC et LiPoly pour les garder loin de toute infiltration d'eau possible, l'énorme quantité de chambre à baldaquin permet également un large choix de capacités Lipoly, d'aussi peu que 1000mAh jusqu'à à 2200mAh 3s. Ceci est une valeur fantastique pour l'argent hydravion qui donnera des heures de plaisir à chaque champ de vol ou de voler hors de l'eau, si vous avez jamais essayé voler des bateaux avant, c'est l'un pour vous!

Spécifications:
Envergure: 1380mm
Longueur: 880mm
Voler Poids: 850g
Moteur: Brushless Outrunner 1300 kv x 2 (obligatoire)
ESC: 25A w / BEC x 2 (obligatoire)
Servo: 9g x 4 (obligatoire)

Comprend:
Outils
La colle
4 x Hélice
Instruction Book
Toboggan Decal Set

A besoin:
Brushless de Bell moteur 1300 kv x 2
25A w / BEC x 2
9g x 4
Your Own 4 canaux TX / RX
3s 1000mAh ~ 2200mAh 3s Lipoly Batterie

Product
Specifications

Informations supplémentaires

  • Référence:
    CATA607-KIT
  • Brand:
    Non communiqué
  • Capacité ( mAh )
    Non
  • Poids (g)
    2535.00
  • Longueur:
    1070.00
  • Largeur:
    210.00
  • Taille
    290.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
My Catalina came yesterday. First look it's a nice built plane. second isn't that nice anymore. The whole plane is made of styrofoam, not EPO or something like that. The material is very thin. If you scratch over a stone your Catalina will sink. I will reinforce mine with 80g/sqm glassfiber. The wings are very bendy, much carbon is needed here. Made from EPO this will be a great plane. As it comes now, you have to work a lot before you can fly it securely. Be careful to use the right glue. It's styrofoam!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Will fiberglass the bottom per recommendations of other buyers. The foam in places is thin and very spongey.



The rubbery nose cones are pretty bad, I figure there's a nice replacement out on HK somewhere if I look.



Otherwise, it's a nice airframe for the price. Brittle EPS, be prepared to reinforce or fly very carefully. Tip floats, horizontal tail piece, and probably wings aught to have additional reinforcement, as well as aforementioned bottom glass.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
In general its an awesome plane. Definately not a plug and fly, but its a perfect base for making a nice scale looking Catalina. You need to repaint the whole plane with some acrylic enamel paints, because the paint used by the producer is rough and not waterproof as well as the water sticked decals. My specification is: Turnigy L2210 210W engines, Hobbyking SS 25-30A ESCs, HXT900 servos, Turnigy 3S 2200 mAh 20C Li-pos and GWS 8040 3 blade props (they are pretty soft so probably the master airscrew would be better) and a 3mm colet type prop adapters. There is more than enough power, I'm doing verticals at 3/4 throttle, but thats not the point when flying this plane. Its very majestic and predictable in the air, takeoofs and landings are like a poem and makes a big WOW at the local lake. The flight time is about 15 minutes. The engine mounts makes a 5 degree up throttle but thats ok, you can easily trim it with the elevator. I'll add some photos at my profile. I love this plane and I'm sure that the price is a real bargain.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Die Catalina 1380mm habe ich mit D4023-850 Out Runner Motoren und 50 Amp-Reglern (H-KING Speed Controllern) ausgestattet. Damit verfgt der Flieger ber aussreichend Leistung ;-) und fliegt sich mit 3S-2200mAh ganz hervorragend. Die Kufenaufnahme wurde vorsorglich mit einer dnnen Glasfasermatte verstrkt.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i want to buy it; but the only thing between the plain an me is the over price of the shipping.. is too expensive, for sample with shipping price that i pay to mexico, i could buy 2 more. so, that's the only thing, i am looking a twin motor plane, but (again) is too expensive the shipping
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
What can you get for $35? - a lot of airplane!
The foam seems brittle and you might need to separate and re-glue some of the wooden parts in the wing, but for $35; it's well worth it.
It floats and steers well with a little thrust and can actually take some pretty hard landings on water.
I put a strip of fiber glass on the hull witch might lengthen it's life.
The only thing that i missed in the package is motor mounts. It comes with two wooden sticks, thats all. So you'll need to take some plywood in the calculations.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Gut verpackt und ohne Transportschaden in der Schweiz angekommen.

Motoren 2x 2818 1350 KV, 30 A Blue Series BEC, Prop 3-Blatt 8x6, Lipo Zippy Compact 2700 mAh. Handstart mit 50pcnt Schub. Vollgas geht sie im 70-Winkel bis an die Sichtgrenze. Mit 40 - 50pcnt Schub fliegt sie scale. Flugzeit mit dieser Konfiguration ca. 18 Minuten. Landung in Wiese. Wasserstart werde ich nach Einbau der aufklappbaren Schwimmer machen (siehe Youtube-Video von voodoo 1882, PBY-5A Canso (Catalina) R/C model). Eventuell mit Lipo 2200 mAh, damit sie nicht zu tief im Wasser liegt. Alles in allem ein super Flieger mit einem unschlagbaren Preis / Leistungsverhltnis. Klar sieht die Catalina von Dynam besser aus,aber an dieser von GuanLi kann man mit etwas Fantasie und Geschick noch einiges herusholen
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
1st impressions when opening the box...no damage normal air parcel to Aus. A Guanli plane meaning the instructions were clear & easy to follow C.G is also mentioned. My 1st time with a twin brushless system, I used 2 1550kv outrunner bells with Turnigy 30 AE AMP escs, works a treat, beautiful plane, even comes with a plastic cover for the bottom for belly ground landings and floats n rudder for water landings...I not landed on water yet as I not have nearby access to a nice big lake...but she flies fantastically, love the sound of the twin motors, Would def buy again for spares or replacement...5 starts, nice stable flyer doesn't need much power get her in the air, docile yet will do loops n simple aerobatics nicely...but i much prefer fly her scale as that is how real one goes...keep these great planes coming in Guanli n HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great and wonderfull airplane i am loking forward to fly it
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Arrived quickly to the UK and very well packed. I carefully epoxy'd the fuselage seam just to make sure it was water tight. Everything fitted perfectly and construction was easy. Wing servos had to be secured with double sided tape, not screws. Motor wires had to be quite a length to connect through the wing mount down to the ESC's. I cut channels in the wing underside to put the wires in. I covered with a light, easy sand, D I Y filler. Wing struts were covered with drinking straws, to make them a bit more scale but keep the weight down. Bit of juggling needed to fit everything into the space under the canopy but no problem. I used thin stips of camera light seal foam to water proof. Botton cowls were glued and the top halfs secured with strips of (very good) doublesided tape. This will allow careful removal at a later time. There is a plastic clear cover to glue&#x2F tape on the bottom of the hull, this is perfect to protect the delicate foam and brilliant for grass take offs. I repainted mine with water based model acrylics and this does tend to toughen up the surface of the foam. The existing paint is an excellent base for a repaint. Care is needed when handling for assembly as the foam is a bit delicate. When complete, the plane is surprisingly strong for the material used. I rate it for the price and quality of the parts fit.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Combinez

et économisez plus
esc
battery
  • Turnigy 2200mAh 3S 20C Lipo Paquet

    Turnigy 2200mAh 3S 20C Lipo Paquet

    Vous économisez enregistrer 2,22 € 2,22 €

    Special Price 6,77 € 6,77 €

    You save enregistrer 2,22 € 2,22 €

    Prix normal  8,99 €

  • Turnigy nano-tech 2200mah 3S 25 ~ 50C Lipo Paquet

    Turnigy nano-tech 2200mah 3S 25 ~ 50C Lipo Paquet

    Vous économisez enregistrer 3,26 € 3,26 €

    Special Price 11,87 € 11,87 €

    You save enregistrer 3,26 € 3,26 €

    Prix normal  15,13 €

servo
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.