Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Pitts Silencieux pour moteur à gaz 20cc

Generating Links

Pitts Silencieux pour moteur à gaz 20cc

Prix:

Now save économisez 0,00 € 0,00 €

37,74 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
148000062
Livraison gratuite? Cliquez ici pour apprendre plus!

Pitts Silencieux pour moteur 20cc - Nice quality Pitts Muffler, plus calme que boursier silencieux, parfait pour capotages slim, RCG le moteur de 20cc de forme.

Poids: 159g inc boulons et joint (Bolt espacement 30mm)

  • Pitts Silencer
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Robert | Acheteur vérifié

  • Overall
  • Quality
  • Value

Very Good

May 25, 2017

Very good value or money. outlet pipes are baffled and it certainly appears to be an acceptable sound level. I will post DB readings next time using the engine.

stuart | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 28, 2016

when fitting this exhaust to the RCG 20 in the HK Grasshopper you will need to cut a large hole in the firewall to accommodate it, use the pitts muffler for the 15cc engine instead it's slightly smaller and fits to 20cc motor perfectly.

simon.castle | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 29, 2015

Port 16.5mm x 10mm, Bolt hole diameter 6.3mm ie 1/4" outer bolt hole to outer 36.5mm, inner to inner 23.5mm.
This fits my RCGF26BM perfectly, the manifold face plate is the same as the on on the original muffler as far as I can see and the supplied gasket is also the same size.
The 2 tubes have 16 hols drilled in them in rows of 4, 90 degrees apart.
Im a bit concerned about the over sized hole for the bolt but then the original muffler was the same.

HAPET | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 01, 2014

this muffeler is not for 20cc ,may be for 35cc ,cause each exit hole diameter is 16mm whereas dle 20cc muffeler has one exit hole diameter 14mm.i bought this and tried on my dle 20cc.my engine is not working properly

mappe | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 29, 2012

Use it with my HK 20cc and its for sure much quiter than the orginal silencer. Very pleased and no issues so far after a few hours of running.

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!