S'inscrire

Product Finder

Options

Useful links

 
[["US","AU","GB","DE"]]
S'inscrire
Shipped From:
  • Global
  • USA

Hélice Guards pour la 250 Class Racer (5inch) Ensemble de 4

Hélice Guards pour la 250 Class Racer (5inch) Ensemble de 4

QTY:

Now save enregistrer 0,00 € 0,00 €

3,44 €
Rating:
Stock:
Poids
20 g
SKU:
9366000025-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Meilleur prix

HobbyKing s'engage à vous offrir les meilleurs prix. Si vous avez vu ce produit autre part pour moins cher, merci de nous le faire savoir!

Description
du

Toute personne qui vole les petits 250 quads de classe est passé par quelques accessoires, si vous essayez de passer à travers quelque chose ou eu un accident acro. Ces gardes prop s'adapter à la plupart des 250 cadres de classe via les boulons de montage du moteur. Les gardes non seulement aider à sauver vos accessoires, mais aider à protéger les autres et les biens de la haute vitesse de 5 accessoires de pouce.

Caractéristiques:
• Adaptable à la plupart des cadres
• Poids léger et durable G10
• Protège vos accessoires et des biens

Spécifications:
Taille: Pour 5 accessoires pouces
Poids: 4.5g chaque
Montage: Via moteur 12,16,19mm montage

Product
Specifications

Informations supplémentaires

  • Référence:
    9366000025-0
  • Brand:
    Non
  • Poids (g)
    20.00
  • Longueur
    148.00
  • Largeur:
    5.00
  • Taille:
    97.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Buenos para empezar y proteger algo las helices. Ligeros. No soportan golpes fuertes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I put these on my Tarot 200 mini quad and they work great for me, because I'm a beginner
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nur f?r Indor geeignet, bei einen Absturz brechen die Teile sehr schnell
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 20 sets for use on 250 drones middles school student were building. Still broke props but not as many as I would have. Paid for themselves many times over.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
There is no way to attach them to HK FPV250 without drilling holes. Really thin and easily bending.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used these on my 180mm Diatone ET 180 while learning. I used the 12mm mounting pattern, which worked ok. They are mighty big for 4 props but did the job. They break very easily (despite a smaller quad and modest crashes into fences/grass.). I think they mainly provide some protection against catching the props on walls. Once one of the three connecting segments break, the prop guard tends to shake/oscillate a bit. Some heatshrink and toothpicks are a good temporary fix to extend their life. They flex, which might be good. They are light. Id recommend them to friends learning how to fly. Im not sure how durable theyd be on a 250 class quad.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Propellers are not so expensive, but when you start Quad like me this propeller guard are great
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought a set to put onto a 250 size quad. The holes are offset so they match a Multistar Elite 2204-2300kv. Problem is the offset hole pattern means the wires run off to the same side, instead of having a choice where the wires run. In the interest of protecting the wires I omitted the prop guards.

If the guards were slotted instead of drilled, like the quad frames are, then the motor would not be forced into a single position.

I COULD have chose to route the wires where the guards would have forced them to run without problem, but I would rather have a little protection to the wires from the frame. I would buy a redesigned set with slots instead of holes.

The material is light and will offer only some protection. A stiffer, thicker guard would be welcome too.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i got two set and glued them with supper glue. I'm using them on my fpv250 orange ghost they help with tipping over and breaking props looks good too but yes I would get 2 or more set and glue them
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very very thin. Easy to break near motors but I recommended to use.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • HK X-Factor 230mm Quadcopter

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.