New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Q450 en fibre de verre Quadcopter Cadre 450mm - intégré PCB Version

Q450 en fibre de verre Quadcopter Cadre 450mm - intégré PCB Version

Discontinued Product

Please continue searching for a similar product.
Poids
395 g
SKU:
297000029-0
WANT FREE SHIPPING? Click here to find out more!

Le Q450 est un cadre 450mm quad bien pensé construit à partir de matériaux de qualité. Le cadre principal est la fibre de verre tandis que les bras sont construits à partir de polyamide nylon ultra résistant.

Cette version du Q450 fonctionnalités intégrées connexions PCB pour le soudage direct de vos CES. Ceci élimine le besoin d'une carte de distribution de puissance ou multi-connecteurs malpropres garder vos appareils électroniques mise en page très bien rangé.

Assemblée est un jeu d'enfant avec des manches en laiton pré-threaded pour tous les boulons de cadre, donc pas de lock-écrous sont obligatoires. Il utilise une taille de boulon pour l'ensemble de la construction, ce qui rend le matériel très facile de garder en ordre et ne nécessitant une taille de clé hexagonale pour assembler.

Une grande caractéristique de ce cadre sont les grandes pattes de fixation à l'avant et l'arrière de la plaque de fond de cadre principal pour les caméras de montage ou d'autres accessoires. Ceci en fait un excellent moyen de prendre la vidéo aérienne ou à la mouche FPV sans la nécessité d'ajouter des supports de montage supplémentaires.

Le Q450 propose également des bras de couleur (2 blancs et 2 rouges) qui sont grands pour l'orientation. Il aide à garder vous voler la bonne direction sans avoir besoin de différents accessoires colorés.

Nous offrons une gamme complète de l'électronique multi-rotor tels que le contrôle multi-rotor bord, ESC et moteurs. Il n'a jamais été plus facile ou plus abordable pour obtenir un quad dans l'air!

Caractéristiques:
Construit à partir de fibre de verre de qualité et de nylon polyamide.
connexions PCB intégrées pour la soudure directe de vos CES
Pré-fileté manchons en laiton pour tous les boulons du cadre.
bras de couleur pour l'orientation pour vous garder voler dans la bonne direction.
Les grandes pattes de fixation sur la plaque principale de fond de cadre pour le montage facile à la caméra.
Montage facile.

Spécifications:
Largeur: 450mm
Hauteur: 55mm
Poids: 280g (w / out électronique)
Trous Moteur Mont Bolt: 16 / 19mm

Obligatoire:
4 x 28mm 1000 ~ 1200kv (ou taille similaire / kv)
4 x 15 ~ 25 Amp ESC
4 x 8x4 ~ 10x4.5 Prop (2CW & 2CCW)
1 x-Rotor multi Control Board HobbyKing
1 x batterie de 1500 ~ 2200mAh 3s 11.1v Lipoly

  • UGS 297000029-0
  • Brand -
  • Capacité ( mAh ) -
  • Poids (g) 395.00
  • Longueur 270.00
  • Largeur 40.00
  • la taille 160.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

had mine for a while and only got round to flying it recently and the first rough landing broke an arm, got a replacement DJI for 4, they are much thicker and better quality plastic. Flew it again and about 1 feet up and the motor cut out landed on one arm quite gently and broke another. The PCB is useful but put a tiny bit if heat on it and the connection fell off. In my opinion i would nit buy this if you want one get the DJI f450 frame, it has better arms and PCB. and it is only about 25.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

had mine for a while and only got round to flying it recently and the first rough landing broke an arm, got a replacement DJI for 4, they are much thicker and better quality plastic. Flew it again and about 1 feet up and the motor cut out landed on one arm quite gently and broke another. The PCB is useful but put a tiny bit if heat on it and the connection fell off. In my opinion i would nit buy this if you want one get the DJI f450 frame, it has better arms and PCB. and it is only about 25.

Pretty good frame. Arms are not as strong as I thought. Took a pretty soft landing in the grass at the local park and broke an arm. Maybe I just landed on that one arm which caused it to break, but im not sure. Otherwise a pretty well built frame and would definitely order more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pretty good frame. Arms are not as strong as I thought. Took a pretty soft landing in the grass at the local park and broke an arm. Maybe I just landed on that one arm which caused it to break, but im not sure. Otherwise a pretty well built frame and would definitely order more.

basic frame, you save money as the frame has a built in distribution board

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

basic frame, you save money as the frame has a built in distribution board

Bought this cheap frame with KK2.1 board, Turnigy ESC Plush 30a, NTM 800kv short shaft, 10*4.5 props. Firstly, the screws that came with the motor acc. were too short to install them on the frame: had to buy ones... Then, the holes don't fit to install the KK2 board. Had to create a board to install it... The screws that come with the frame don't fit very well and can unscrew during flight, I put a little bit of hard glue on them.
Finally, for my second flight, I loose a prop. when the quad was around 5m height (it's because of the poor quality of the fixations that were unscrewd during flight PRODUCT ID: NTM2830S-800 !!!). No spare parts are available on HK. But for the price you can buy another frame if it is in stock.
However, I liked the integrated PCB and the easy way to mount it (if you have all the pieces!). If you want to do FPV, you will not have a lot of space to place everything... A landing skid is a must have on it.
I would not recommend it because of all those negative points. Price is not all that matters.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this cheap frame with KK2.1 board, Turnigy ESC Plush 30a, NTM 800kv short shaft, 10*4.5 props. Firstly, the screws that came with the motor acc. were too short to install them on the frame: had to buy ones... Then, the holes don't fit to install the KK2 board. Had to create a board to install it... The screws that come with the frame don't fit very well and can unscrew during flight, I put a little bit of hard glue on them.
Finally, for my second flight, I loose a prop. when the quad was around 5m height (it's because of the poor quality of the fixations that were unscrewd during flight PRODUCT ID: NTM2830S-800 !!!). No spare parts are available on HK. But for the price you can buy another frame if it is in stock.
However, I liked the integrated PCB and the easy way to mount it (if you have all the pieces!). If you want to do FPV, you will not have a lot of space to place everything... A landing skid is a must have on it.
I would not recommend it because of all those negative points. Price is not all that matters.

Two front arms broke off in a very light crash, my 3D printed quad arms are stronger than these. As far as a kit, it was nice to put together, the intergrated PCB is handy, but if it can't survive one small crash, its not worth the build time. Won't be buying another one of these frames.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Two front arms broke off in a very light crash, my 3D printed quad arms are stronger than these. As far as a kit, it was nice to put together, the intergrated PCB is handy, but if it can't survive one small crash, its not worth the build time. Won't be buying another one of these frames.

This is a very cheap frame, and works well. The problem is that the arms are INCREDIBLY fragile. I have broken 3 already. I bought a spare frame so I had spares but the arms are a terrible design. I added another deck to mine by using a top plate from my second kit. Good for housing all of the FPV equipment within leaving the top deck free for the controller.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very cheap frame, and works well. The problem is that the arms are INCREDIBLY fragile. I have broken 3 already. I bought a spare frame so I had spares but the arms are a terrible design. I added another deck to mine by using a top plate from my second kit. Good for housing all of the FPV equipment within leaving the top deck free for the controller.

Its a great frame, brakes kinda easy but considering the price, its great!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Its a great frame, brakes kinda easy but considering the price, its great!

Awesome frame all around, I didnt have any issues with the supplied screws that others reported (maybe the new batch is improved). Everything was straight forward. This was my first quad build and I used this frame with (4) Turnigy D2822/14 1450kv motors, (4) HK Afro 20amp esc's and (4) Gemfly 8045 props and it has tons of power and runs cool. Very happy with everything from HK. A 3s 2200 40c pack gives about 8min flight. Highly recommended, the integrated PCB is a must have, so easy.

Jordan

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome frame all around, I didnt have any issues with the supplied screws that others reported (maybe the new batch is improved). Everything was straight forward. This was my first quad build and I used this frame with (4) Turnigy D2822/14 1450kv motors, (4) HK Afro 20amp esc's and (4) Gemfly 8045 props and it has tons of power and runs cool. Very happy with everything from HK. A 3s 2200 40c pack gives about 8min flight. Highly recommended, the integrated PCB is a must have, so easy.

Jordan

Very good Frame for light quads.
The weight is high but the durability is very good.
Easy to build and rebuild if necessary :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good Frame for light quads.
The weight is high but the durability is very good.
Easy to build and rebuild if necessary :)

Best quality/price. My first real quadcopter. I bought as spare, because in crash case, the single arms broke in two points.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Best quality/price. My first real quadcopter. I bought as spare, because in crash case, the single arms broke in two points.

Customer files
Q450 and Arduino based Quadcopter Download [1833]
Firefly FY450 - Box Download [89]
Firefly FY450 - Inside the box Download [79]
Firefly FY450 - Top plate Download [69]
CAT-Q450-01 Download [2876]
CAT-Q450-02 Download [3105]
shapeways cage for kk2.0 on q450 Download [148]
No File Name Download [477]
Completed frame Download [2538]
Motors on Frame Download [208]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save