Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Turnigy Quad 4x6S Chargeur Lithium Polymère 400W DC uniquement

Generating Links

Turnigy Quad 4x6S Chargeur Lithium Polymère 400W DC uniquement

Prix:

Now save économisez 0,00 € 0,00 €

94,00 €
Expédié de:
  • USA
  • Global
Déjà acheté
Heure d'arrivée estimée: Aucune Heure D'arrivée Estimée [ ? ]
Statut:
Epuisé!
SKU:
9070000060-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Le Turnigy Quad 4x6S peut charger quatre batteries simultanément! Les packs peuvent être de divers types, tels que Lilo, LiPo, LiFe, LIHV, NiMH, NiCd et Pb. Un chargeur de qualité avec un équilibrage précis et un système de menu familier et intuitif.


Le Turnigy Quad 4x6 est équipé de 4 microprocesseurs de haute précision pour charger chaque batterie individuellement. Son système de refroidissement efficace garantit un fonctionnement sûr tout au long du cycle de charge. Tous les ports fonctionnent indépendamment les uns des autres pour vous offrir une grande polyvalence. Il est possible d'équilibrer la charge d'un pack LiPo sur le port-1 tout en chargeant en série une batterie LiFePo4 ou NiMH sur le port-2 ou de nombreuses autres combinaisons.


Il n'y a aucune raison d'acheter quatre charges individuelles. Le Turnigy Quad vous fera gagner du temps en chargeant quatre batteries à la fois.


Spécifications:
Plage de tension de fonctionnement: 10.0 ~ 18.0V CC
Changer la puissance: 100 watts maximum pour chaque prise (10A 100W x 4)
Puissance de décharge: 5 watts maximum pour chaque prise (2A 5W x 4)
Plage de courant de charge: 0.1 ~ 10.0A pour chaque prise
Source d'alimentation: 12V DC (batterie de voiture) / Alimentation secteur AC (>200Watts)
Nombre de cellules: 1-15 Ni-xx / 1-6 Li-xx / 1-10 Cellules plomb-acide (2~20V)
Consommation de courant pour l'équilibrage li-xx: 300 mA
Ventilateur d'extraction de dissipateur thermique à grande vitesse.


Inclus:
1 x chargeur Turnigy
1 x adaptateur JST XH
1 adaptateur TP/FP
1 x fiche banane avec mâle XT60
1 x fiche banane avec mâle XT90
1 x fiche banane avec JST mâle
1 x fiche banane avec pince crocodile
1 x fiche banane avec 18AWG sans connecteur
1 paire de pinces crocodiles


Remarque: alimentation non incluse. Tous les accessoires montrés dans l'image sont inclus.

  • Turnigy Quad 4x6S Lithium Polymer Charger - HobbyKing Daily
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Ivanov C. | Acheteur vérifié

  • Overall
  • Quality
  • Value

A good charger with ups and downs

Jan 24, 2023

I bought the charger together with the parallel charging boards and after using the parallel boards I realized that I didn't need such a charger. Anyway, it is a good charger at the hobbyist's house and at the airfield.
Some observations about this charger:
1. You have to buy separately 3 JST XH adapters plus banana plugs to be able to connect 4 lipos on each port. The kit contains only 1 jstxh adapter
2. It has a cooling fan that works all the time and makes noise, so it is not good to use the charger in the bedroom at night if you want to sleep. After the warranty period has passed, I will install a switch to stop the fan when the charger is not full loaded
3. I used a 240w main psu unit and first the power source must be turned on and then the charger must be connected so that the low voltage error does not appear
4. The discharge rate is quite low, 5W on each port. Discharging a 2200mA lipo from the fully charged level to the storage level will take approximately 3 hours. ((will discharge this battery with a maximum rate of 0.3A even if you select a higher rate this will be the maximum for this battery)). It's ok if you're not in a hurry.
5. There is no manual charging option for nicd and nimh batteries, even though the manual says that there is a manual option, also at the end of the process, you can NOT see charged or discharged electric capacities of the battery at each cyclic
process.
HK mentioned after a discussion that these options were on an older version of the charger and that on the new version they were removed this options for security reasons. Another buyer specifies on the forum that it is not possible to return to the old software version to benefit from this options. Anyway, you can live without these options
6. IR test meter. I measured a lipo battery on each port and each time I got different results with big differences.
I don't know if it's ok like that
7. The buttons are a bit hard and cramped and located a little lower than the case and if you have thicker fingers they are a bit uncomfortable to use
8.The software has some glitchs. When you will use you will notice certain inconsistencies, like pressing enter and you notice decreasing the amperage and others which are difficult to explain. But they can be overlooked
9. I charged some older lipo batteries and the charging process had to be stopped manually, because the charger did not stop automatically. Although the batteries did not absorb current, the charging process did not end automatically.
This did not happen with the new batteries. Finally, the old ones returned after a few charge and discharge cycles

Charger | Acheteur vérifié

  • Overall
  • Quality
  • Value

Turnigy charger

Nov 24, 2022

Great charger easy to use. One slight down fall is the charging ports do not line up with the displays. After some use this is a non issue.

serge | Acheteur vérifié

  • Overall
  • Quality
  • Value

trés bien

Nov 11, 2022

parfait

Untanux | Acheteur vérifié

  • Overall
  • Quality
  • Value

Good budget 4in1 charger

Jul 08, 2022

Good simple charger, weak-point is cooling fan, its noisy and doesn't last very long.

Wayne | Acheteur vérifié

  • Overall
  • Quality
  • Value

Good product and great price

May 27, 2022

Very good product and a great price

Juanjo | Acheteur vérifié

  • Overall
  • Quality
  • Value

Cargador

Apr 06, 2022

Es el mejor que tengo, carga rápido

Perce | Acheteur vérifié

  • Overall
  • Quality
  • Value

I though it was 240v not having to connect to a battery

Mar 25, 2022

I have waisted my pension money

DP | Acheteur vérifié

  • Overall
  • Quality
  • Value

Turnigy charger

Feb 14, 2022

Excellent product, does the job but arrived in inadequate, damaged packaging.

Bruce | Acheteur vérifié

  • Overall
  • Quality
  • Value

Garbage

Jan 11, 2022

This charger is garbage. I used a 10amp 12V PSU and get "Input Voltage Error" on every port, just trying to balance charge a 3S 2200mah battery that is mostly full. Tried another PSU with the same result. Returning it. Took Hobby King 22 days to give this to the courier and another 43 days to ship this from Australia to NZ !!! Don't buy from this crowd unless you are in no hurry to receive the product.

Gabriele | Acheteur vérifié

  • Overall
  • Quality
  • Value

Turnigy Quad

Dec 01, 2021

I'm very happy about this charger.
It's able to charge lipo, Life,LiIon,pb, nmh battery, with or without balancer!
It works very fine. Five stars!!!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
Fichiers clients
Turnigy Quad 4x6S Charger 400W Manual Download [6]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires