Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Quanum NEON Frame Kit de course 250 Carbon Avec LED

Generating Links

Quanum NEON Frame Kit de course 250 Carbon Avec LED

Prix:

Now save économisez 0,00 € 0,00 €

42,14 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9323000077-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Le Quanum NEON est l'évolution du matériel de course FPV 250 de classe. Le NEON intègre toutes les nécessités, le luxe et la folie que vous pourriez jamais vouloir dans un exosquelette super durable de course pleine de carbone.

The Neon A Cyborg semble une tendance à l'écart des cadres plaque moyenne empilés de la saison dernière. Et un profil plus bas ajoute de la force tout en améliorant la masse CG pour le contrôle croustillant.

Le Neon a été construit pour la course et conçu dès le départ pour la durabilité, fabriqué à partir de carbone plein, les piles sont montés rapprochés avec suffisamment de matériel CNC, ce qui en fait une forteresse volante ... Avec les gardes de moteur entièrement clos et le compartiment de la batterie. Tous les composants sont logés à l'intérieur pour la protection exosquelette complète des coups les plus durs. L'avant et l'arrière ont CNC dépoli diffuseurs LED pour un style de Néon bien zoom autour du cours. La face avant prend en charge une caméra FPV dans le cadre jusqu'à 30mm. Les piles de châssis sont espacés de seulement 10 mm pour résistance à la torsion mais laisse beaucoup de place pour ESC, FC, vitesse FPV et plus encore.

Le Quanum NEON est un bouchon de spectacle sur l'apparence, la qualité, la durabilité et FPV Insanity.

Caractéristiques:
diffuseurs • Avant et arrière CNC LED pour un effet NEON luminescente
• Construction de la plaque de carbone avec Low Profile exosquelette force
• La conception du moteur protégé du bras et du compartiment à piles
• Une large gamme de moteurs et d'accessoires jusqu'à 22 séries et accessoires 6inch
• matériel CNC pour un gain de poids

Spécifications:
Empattement: 250mm
Poids: 155g
moteurs: 1806 ~ 2206 (12 ~ 19mm montage)
Props: 5 ~ 6 pouces
ESC: 10 ~ 20A
FPV Cam: jusqu'à 31x13mm
LED: Bleu avant rouge arrière

Obligatoire:
4 x Motors 1806 ~ 2208
1 x Batterie 800 ~ 1500mAh 2 ~ 4s
4 x Hélices jusqu'à 6IN
4 x 10 ~ de ESC 20A
contrôleur de vol multi-rotor 1 x
la radio 4ch (6ch recommandé pour FPV et le FC utilisation)
engrenage FPV (en option)

  • Quanum Neon 250 Frame Kit----
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

tim | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 16, 2016

This frame looks great. But it's weak and breaks very easily. I bought two.... both are now trash. Pretty disappointed with my purchase, enough so that I have come back here to write this review warning others.

This frame has potential... but the design is such that cutouts in the base plate mean that the front arms are only attached by a couple of mm2 of material. The top plate only attaches to the front arms by one screw.

If you plan on using your quad purely for photography at minimal risk of crashing, then this frame will make it look badass.

Bartomiej | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 30, 2015

Great design. Good fit. Sadly you can't buy spare spacers, only screws. Original LED strips are not dense enough. only got 3 LEDs. It's not full carbon laminat. Inside it has glass fiber. only on top, and bottom there is carbon fiber. Big mistake is week nose section, because two forearms are hanging only on few milimeters of plate, which is main reason of destruction. You need to add your own carbon structure or something. Laminat is 1,2 mm thick, which would be great, if it was full carbon, now it's a bit weak. After all I think, that's more for the look, but it isn't bad product.

ulf | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 28, 2015

Generally a nice frame, but probably not suitable for fpv-racing. It cant even take a slow fall on grass, without breaking and shearing off screws.
Cannot recommend.

Reinis | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 21, 2015

Although this in very nice looking frame but its design is poor. I would even go as far as to claim that frame is made weak with intention! If you look at lower frame - notice that front of it is connected to whole frame with just two weak and thin carbon lines. I can not find other reason than intention to make this frame break for this poor design. Obviously - after crash front simply broke off.. And.. there are no spare parts available for this frame...

ad_wing | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 08, 2015

Quad perfeito para indoor noturno. Fica muito bonito.

Erwin | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 21, 2015

After destroying one frame in a very nasty crash ( both front arm came off ) I decided to buy 2 frames and double up all of the plates. It's nice and thick now it adds some weight to it but it is not dramatic it also makes it twice as expensive ofcource. I already put it nose first in to the ground a few times with pieces of propeller flying in all directions and one broken fpv antenna as a result but the frame is holding up nicely now, it never would have survived those crashes with just 1 bottom plate, Hobbyking should make a version off this kit with plates that are twice as thick as this one , beside that it is a great frame to fly and it looks really great in the air.

Erwin | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 21, 2015

After destroying one frame in a very nasty crash ( both front arm came off ) I decided to buy 2 frames and double up all of the plates.
It's nice and thick now it adds some weight to it but it is not dramatic it also makes it twice as expensive ofcource.
I already put it nose first in to the ground a few times with pieces of propeller flying in all directions and one broken fpv antenna as a result but the frame is holding up nicely now, it never would have survived those crashes with just 1 bottom plate,
Hobbyking should make a version off this kit with plates that are twice as thick as this one beside that it is a great frame to fly and it looks really great in the air.

|TAB| | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 01, 2015

nice and strong, enough space for everything

mrlee03 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 22, 2015

After reading stories about how weak this frame is i still ordered one as it looks fantastic, i have been flying it now for over a month and had my first big crash with it today (lost orientation) 20-25 metre freefall and hit the ground nose first at 45 degrees. im delighted to say that it survived with minimal damage. the battery tray screws have bent slightly and that is all.

Great value
Great looking
Fun to build
Would recomend this to everybody, Everybody needs a neon 250 at least once.


However i would not advise this frame for close proximity racing (woods, abandoned building etc etc) only because it is highly likely that this frame will break in hardcore racing and crashing circumstances.

BOSS302 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 18, 2015

for the FUN Factor it is good !! but if starting out? might be disappointed? not in a bad way? but it is a little geared if you been flying a little bit? this out of the way if your skills are good to Novice not a bad FRAME! this is one of my "Personal Favorates" now with the Superior CC3D Controller it has a Somewhat "Predictable Feel" and I use it for my FPV racing and just having fun thing, the I highly recommend NOT getting the KK-Mini board! of 3 we tried it did not like this "Frame"???? and the KK bigger one will NOT FIT it "Can" but probably not how 99.999999pcnt would like to fit, get the
"Superior NAZE or CC3D boards" and "SMALL" 12a ESC's ,I now have 3 and there my "GO TO" ones for just fun fly !! but starting out? this may not be for you? but good to have for when you feel more confident in skills !!

  1. 1
  2. 2
  3. 3
Fichiers clients
No File Name Download [256]
Factory LEDs Download [512]
Factory LEDs Download [600]
Factory LEDs Download [797]
Factory LEDs-off Download [897]
Factory LEDs-off Download [857]
Complete no Fpv Download [2281]
ESC Wiring Download [2776]
Modification 1 Download [239]
Modification 2 Download [252]
  1. 1
  2. 2
  3. 3
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires