New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Quanum Pico 32bit brossé Conseil de contrôle de vol

Quanum Pico 32bit brossé Conseil de contrôle de vol

Discontinued Product

Please continue searching for a similar product.
SKU:
9154000023-0
WANT FREE SHIPPING? Click here to find out more!

Les bonnes choses viennent en petits paquets et dans ce cas son pas seulement bon, son grand.

Réglage de la norme Multi-Rotors encore une fois, Quanum a écouté les constructeurs de mini et micro Quadrirotor et libéré la Commission de contrôle de vol d'une Fonction complète qui a été brossé objet conçu et construit pour quads autour de la classe 100mm et 100mm sous.

Ce brossé FC a quatre construit dans les CES à 4.3A par FET et est idéal pour les moteurs à balais dans la gamme de taille 6 ~ 8mm. Il a également un en DSM2 récepteur intégré / DSMX compatible.

Le Pico est un 32bit complet Cleanflight soutenu FC conseil et a une connexion micro USB. Une fois que vous avez téléchargé cleanflight sur votre PC, vous branchez simplement votre Quanum FC Conseil Pico dans votre PC et vous avez un contrôle complet sur ses paramètres. Son facile.

NOTE: NE PAS BRANCHER LA BATTERIE ET USB EN MÊME TEMPS, LA RX recive ALIMENTATION DE LA USB POUR SET UP. LES FETS SERONT ENDOMMAGÉES AUTREMENT.

Spécifications:
ESC: brossé 4.3A x 4 (2 ~ 32KHz 4khz stock) moteurs 6,7,8mm compatibles
RF: DSM2 / DSMX compatible
Taille: 20x33x6mm
Poids: 2.5g
Logiciel: Cleanflight ou Baseflight compatible
Tension: 1s compatable, avec construit dans 5V Convertisseur DC / DC



  • UGS 9154000023-0
  • Brand Quanum
  • Capacité ( mAh ) -
  • Poids 10.0000
  • Longueur 80.00
  • Packaging Width 10.00
  • la taille 60.00
  • Quanum Pico 32bit FC
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Easy to setup, extremly small and light. Use it on cleanflight with 8mm motors(theses ones : http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=86504) and this frame (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=89218), and this battery (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24920)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Easy to setup, extremly small and light. Use it on cleanflight with 8mm motors(theses ones : http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=86504) and this frame (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=89218), and this battery (http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=24920)

Brought this a few weeks ago in conjunction with the whisp frame and micro motors Dark edition 8.5mm motors. Initially used betaflight luxfloat but found after a few flights it developed a drift problem. I then reflashed in CLeanfight to Alienwii F1 which I found to be MUCH more stable - no drift problems so far - perfectly stable flight characteristics. Not sure why other people are not doing this instead. Binding can be a tiresome affair. Takes me a minimum of 3 to 4 attempts to bind. You need to keep the transmitter VERY close to the board when binding. Finally, I have FPV gear onboard. It feels a bit sluggish even though its AUW is only 64grams. I might try another batch of motors but it would be nice to have a little bit more punch. Hope this helps ;)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Brought this a few weeks ago in conjunction with the whisp frame and micro motors Dark edition 8.5mm motors. Initially used betaflight luxfloat but found after a few flights it developed a drift problem. I then reflashed in CLeanfight to Alienwii F1 which I found to be MUCH more stable - no drift problems so far - perfectly stable flight characteristics. Not sure why other people are not doing this instead. Binding can be a tiresome affair. Takes me a minimum of 3 to 4 attempts to bind. You need to keep the transmitter VERY close to the board when binding. Finally, I have FPV gear onboard. It feels a bit sluggish even though its AUW is only 64grams. I might try another batch of motors but it would be nice to have a little bit more punch. Hope this helps ;)

This is without a doubt one of the best FCs for brushed motors. Able to run 8.5 motors with zero issues. Load Betaflight (naze32) and configure in Cleanflight. Use commands shown in prior posts in CLI.
- Had to buy an OrangeRX to use with my Taranis.
- PICO flight controller
- Recommend the Nano-tech 750mah 1s batteries. Flight time of 8 minutes
- Usmile all-in-one Ultra Micro 600TVL 170 Degree FPV Camera and Video Transmitter 5.8G 8CH 200mW VTX (fantastic and very lightweight FPV)
- Pololu #798 to clean the power. Video was horrible until I installed this.
- Hubsan props
- Parrot Mini Drone frame
- Custom 3D camera mount and FC mounts
- 4x 8.5mm brushed motors
- some VERY small size soldering

Absolutely a blast to fly indoors and out.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is without a doubt one of the best FCs for brushed motors. Able to run 8.5 motors with zero issues. Load Betaflight (naze32) and configure in Cleanflight. Use commands shown in prior posts in CLI.
- Had to buy an OrangeRX to use with my Taranis.
- PICO flight controller
- Recommend the Nano-tech 750mah 1s batteries. Flight time of 8 minutes
- Usmile all-in-one Ultra Micro 600TVL 170 Degree FPV Camera and Video Transmitter 5.8G 8CH 200mW VTX (fantastic and very lightweight FPV)
- Pololu #798 to clean the power. Video was horrible until I installed this.
- Hubsan props
- Parrot Mini Drone frame
- Custom 3D camera mount and FC mounts
- 4x 8.5mm brushed motors
- some VERY small size soldering

Absolutely a blast to fly indoors and out.

If you're looking to upgrade the flight controller in your existing toy, or looking to build your own FPV quad with micro brushed motors, this board is probably your cheapest option. I've found similar boards for around $60 but this one has an integrated DSM2 receiver, so if you own a Spektrum receiver... even better. It's about the same size as a Hubsan x4 receiver, but has no screw holes. You'll have to mount it using zip ties or double sided tape. Cleanflight settings will require a change in cli with the following command: set_motor_pwm_rate=32000. I'm probably going to be buying more of these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

If you're looking to upgrade the flight controller in your existing toy, or looking to build your own FPV quad with micro brushed motors, this board is probably your cheapest option. I've found similar boards for around $60 but this one has an integrated DSM2 receiver, so if you own a Spektrum receiver... even better. It's about the same size as a Hubsan x4 receiver, but has no screw holes. You'll have to mount it using zip ties or double sided tape. Cleanflight settings will require a change in cli with the following command: set_motor_pwm_rate=32000. I'm probably going to be buying more of these.

Awesome little fc. I have it in the wisp and it flies well. Flashed it easy first attempt, and set up was also a breeze. The solder pads are close, but if i can do it (barely can see that small stuff lol) then everyone can. Only issue I have is that I want them too release this with 8 esc, because I'm greedy for motors, and I really want to make a lego octoX lol.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome little fc. I have it in the wisp and it flies well. Flashed it easy first attempt, and set up was also a breeze. The solder pads are close, but if i can do it (barely can see that small stuff lol) then everyone can. Only issue I have is that I want them too release this with 8 esc, because I'm greedy for motors, and I really want to make a lego octoX lol.

Really convenient FC. Very lightweight, powerfull ESC's, built-in Rx and Cleanflight support. Takes a little while to setup PID's correctly, but flies great now! Recommended

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really convenient FC. Very lightweight, powerfull ESC's, built-in Rx and Cleanflight support. Takes a little while to setup PID's correctly, but flies great now! Recommended

First dabble into micro quads, cracking little board, enough information out there to get you started. Overall about 2 days worth of research and tinkering to get the Wisp 110 flying! Will post up Cleanflight settings etc in the files section soon
All up 40 and flying!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First dabble into micro quads, cracking little board, enough information out there to get you started. Overall about 2 days worth of research and tinkering to get the Wisp 110 flying! Will post up Cleanflight settings etc in the files section soon
All up 40 and flying!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!