Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Racer Cat 60 Balsa 1600mm Glow (Orange) (ARF)

Generating Links

Racer Cat 60 Balsa 1600mm Glow (Orange) (ARF)

Prix:

Now save économisez 0,00 € 0,00 €

157,45 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
RacerCat-WO
Livraison gratuite? Cliquez ici pour apprendre plus!

Ressemblant qu'il fait encore debout 100 mph, le Chat Racer est un tout à tous les modèles de pilotes qui donnera des heures de plaisir. Le Cat Racer est une bonne taille et la palette de couleurs attrayantes est grande pour l'orientation. Plus vous regardez cette ARF, plus les impressionne de qualité, superbement appliqués couvrant Oracover, le matériel est de qualité supérieure, le capot et guêtres ont une finition laquée profonde et la cellule est incroyablement bien construit, solide et léger.

Conçu soit pour un accident vasculaire cérébral ou 0,60 deux 0.90 moteur à quatre temps, le modèle ne nécessite que servo standard assez basique de et offre ainsi une construction rapide pas cher. L'aile est 1pc amovible mis en place de sorte que le Cat Racer est facile à transporter et à la conception de l'aile est impressionnante, section mince avec une charge alaire lumière, le tailpane est également le profil pas drap plat.

Ce modèle offre le pilote RC tellement, capable de vitesse ou de vol lent doux, des manières impeccables encore totalement acrobatique, beau mais durable, le chat Racer 60 va vous faire sourire et sourire pour les années à venir!

Spécifications:
Envergure: 1600mm
Longueur: 1450mm
Wing Zone: 45.8dm2
Voler Poids: 3000g
4 canaux

Comprend:
Fuel Tank & Fittings
Montage moteur
Instructions
Matériel
Autocollants

A besoin:
Your Own 4 canaux TX / RX
0.60 deux temps ou quatre temps 0.90 Glow Engine
5 x Servo standard
Reciever Batterie (+ UBEC pour 2s Lipoly RX Batterie)
50mm ~ 55mm Spinner

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Fritz | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 28, 2015

Um dos melhores kits que adquiri at hoje!!!
muito bem construido super rpido estou usando um motor glow 61a servos aerostar de 9,33kg 0.13 de resposta que so perfeitos , muito preciso excelente planeio sem contar que muito rapido minha helice 11x7 bateria de life nanotech de 1700mah nao uso bec mais uma vez hobby king surpreende!!!!

Bruce | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 28, 2015

This is a great model. The quality is very high and the build was very easy and quick. Saito 91 4 stoke gives the model extremely good performance. Maiden flight was simple and easy with no unexpected issues. Landing is easy and straight forward and the glide is very good indeed. This is as good as my H9 Pulse (at a fraction of the cost) which fly's extremely well with a 91 4 stroke. Well done HobbyKing for a very good model. IT ALSO LOOKS GREAT TO
Down side is the fuel tank is too small and the control surface horns are not to my liking and the push rods are the wrong size (too thick) for the outer tube. Therefore only a 4 for overall rating. Build quality of the model is excellent.

fabio983 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 23, 2014

Come gi detto, la ricopertura ottima, il modello molto leggero, sicuramente non ama essere strapazzato troppo, per ora nelle acro di basa non ho avuto problemi.
Tutto l'hardware di buona qualit, il mio motorizzato asp 61 2t, in buona sostanza il classico modello neutro (tutto calettato a 0 gradi), preciso e stabile, anche in atterraggio.
L'unica pecca sono i tubi dei bowden un po' troppo piccoli, quando ci si infila le astine fanno fatica a scorrere....

R | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 24, 2014

Well I have one of these and I am impressed with it flight performance, it flys very smoothly and no bad habbits, have the c of g as instructions say. I have a saio 91 in it.
Built quality is as any artf from known main stream ( good).
Ony two things about it the fuel tank is a bit small for some, and the controll rods supplied for the elevator and rudder are two stiff so you defently have to change those for more flexable rods (no big deal)

Respit | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 03, 2014

Tengo cerca de 30 aviones de Hobbyking, y este es el que viene mejor terminado de todos.

Hoy lo he volado con un ASP .61 y va de lujo. Es rpido, y muy estable en vuelo, como pesa muy poco, es muy fcil de volar.

punzus | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 05, 2013

arrivato ilo modello dall'olanda in 3 giorni, e sono rimasto veramente sorpreso per la fattura, la copertura eccellente, al pari di marche ben pi blasonate e il modello in generale fatto veramente bene, leggero, ma ben costruito. rapporto qualit prezzo eccezionale.

Old Man | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 03, 2012

many months later this plane turned to bug splat when i was flying it like a pylon racer, i have had a lot of high speed fun but the tail plane / elevator
assy parted when i was pulling up and the plane went down. god rest its soul if your your a god botherer ( im not )

DollarDave | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 26, 2012

Electric Conversion



Setup

Rimfire 60

Castle Ice 75

13 x 8 prop

Turnigy 40-50c, 3000mah, 6 cell lipo

Hitec 422 & 645 mg servos

1560 watts peak, 65 amps

All up weight, 6.1 lbs

250 watts per lb max burst

220 average



pretty dang fast for such a heavy plane



Modifications

Reinforce firewall with 3/16 ply doubler

2 dowels in each wing, in addition to HK joiner

Large HK motor mount, cut to allow for cowl

Sliding batter tray, to get battery completely forward

Servos mounted in rear of fuselage for tail surfaces

4/40 ball links and rods on all control surfaces

Upgraded sullivan tail gear, and 4.5 inch foam main wheels

Muffler indention cut out to allow for ventilation, rear exit made from old

wheel pant mounted on bottom of fuselage.



Plane went together beautifully. It's very well designed, great arf. Buy it, it looks great in the air, on the ground or hanging in my man-cave..you won't be disappointed. Flys straight and true, 2 click adjustment on maiden. Crappy video my wife shot is uploaded.

Vincent | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 16, 2012

VERY impressed with the quality. The covering is excellent. Not one wrinkle out of the box. Appears built very well with sufficient glue visible at critical joints. All the hardware looks useable and of good quality. I have over 50 planes and this is better than most of whats available from H9 or GP. Very unique looking plane. I'm sure it will build quickly and easily. I plan on installing a Saito 91 four stroke. Will update on the building and flying ASAP. Good job HK. Price is great for what I received!

JZwerk | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 08, 2012

Hello All,

Just got two of these for my son and me. At this point I am in the middle of assembling them. Overall this is a very nice plane. The covering was wrinkle free when they arrived. The parts are fitting together perfectly. The construction is very good compared to some other Arf's I've had from other companies. The wood is of good quality, much better than most. I think these planes will be a real blast to fly this summer. I did notice two things that could be improved. The fuel proofing on the firewall leaves a bit to be desired. This is easily taken care of with a coat of dope or polyester resin. I usually give most of the arf's another coat anyway. The pushrods are the main area of concern. The metal rods barely go through the guides and are very stiff. They are not satisfactory, but then again, the plane is value priced. Other than the pushrods I really have no complaints. I still think that they will be great planes to fly. Thanks Hobby King.

  1. 1
  2. 2
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires