Prix total

0,00 €

Panier 0 Panier 0 Loading...

Red Arrows Faucon 35mm EDF Micro Jet OEB (PNF)

Generating Links

Red Arrows Faucon 35mm EDF Micro Jet OEB (PNF)

Prix:

Now save économisez 0,00 € 0,00 €

67,10 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
T45-35-PNP
Livraison gratuite? Cliquez ici pour apprendre plus!

Ce petit BAE Hawk est incroyable, la mousse EPO combinée avec ses stats de plume signifie qu'il sera très indulgent de l'atterrissage impair inférieur à 100%. Le Fan Unit & ESC 35mm sont pré-installés comme les ailerons et ascenseur servos, le modèle est disponible en 2 morceaux tout ce que vous avez à faire quand il arrive est fixer le stabilisateur vertical, brancher l'équipement de RC à un Reciever qui utilise Micro Molex 3 conectors Pin, tels que le HobbyKing OrangeRx 4 canaux Micro reciever et vous êtes prêt à aller ...... où étions-nous? Ah oui, effectuer ces fameux Red Arrows aerobatics dans le parc local, terrain de basket-ball, en fait assez bien partout, ces modèles sont une huée absolue lorsqu'il est déployé avec des amis, en fait obtenir assez de vous ensemble et voir si vous pouvez retirer une partie de les Red Arrows de ceux à couper le souffle à proximité formation de routine sont célèbres pour!

La boîte le modèle arrive en est vraiment pratique pour non seulement le transport du modèle pour empêcher cintre éruption, mais les poches de rechange dans la mousse d'emballage sont idéales pour le transport Lipolys de rechange et vous aurez tellement de plaisir avec cela, je voudrais porter quelques-uns! Ce faucon est si mignon, même votre épouse sera comme ça!

Spécifications:
Envergure: 363mm
Longueur: 431mm
Voler Poids: 95g
Wing Zone: 2.35dm2
Wing Chargement: 40.4g / dm2
EDF: 35mm avec 9000kv Brushless Outrunner Motor
ESC: 6A w / BEC
Servo: 3 x 2g

Comprend:
Missiles en option
3 pales du ventilateur Rotor
Instruction Book

A besoin:
Votre 4 canaux TX / RX (RX compatible avec 1.25mm Molex 3 Connecteurs broches) propre
7.4v 450mAh 2s Lipoly

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Capt. Peter | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Oct 07, 2014

Very nice looking Hawk but needed a few modifications. I run this on 3S 450 gensace lips and a H-King 10a esc. Very nice power but didn't try it on 2s. The Aileron control horns needed some glue and tightening and the cockpit is missing the pilots (lol). It's fun to fly but needs a big hard throw to get it moving

Asitt | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Feb 15, 2014

Very cool micro edf. Hand launching takes a bit of practice but a nice firm toss about 45 degrees gets it up ok. Running stock setup and flys well and straight. Orientation is a bit hard at a distance as it's all red. Max throws for elevator as it is very small and set minimum throws on ailerons as it is very responsive and can be very twitchy at full throttle.
Overall a fun, small and great sounding little edf.

Frogforce#1 | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jun 29, 2013

Wow I like this T45. I have the red Bae Hawk version, not the white Gosh Hawk scheme. Mine came out of box lovely but had to do sum surgery to get it sweet. I noticed that one of the aelieron servos didn't have tape on it like the elev and other aelieron servo, on closer inspection it is different so I ashume it should be the elev servo and was put in the wrong spot on assembly line. No matter I swapped the right one into aelieron spot and used a turnigy digital 4g servo for elevator after freeing up the rods and running in the epo hinges, much freeier action. I also made little plastic washers for the control rod links to the horns to take out the freeplay. Shortened all the wires and removed some plugs too, but still with a nano tech 2s 350mah my auw (all up weight) is 120g. It shore makes good thrust testing so maiden shortly, then might go 3s setup and try getting auw down a bit more. Too happy can't wait, I have the twin A10 35mm too, it was heavy but flys excellently like a bigger plane.

col.and | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jun 01, 2013

Very powerfull jet. It's my first one, and I'm in love with it. I fly with my nanotech 300mah or 450 2s lipo.

col.and | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 01, 2013

Very beautiful jet to fly!!!!

| Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

May 05, 2013

this little red arrow looks very nice and even has 2 little pilots in it,sadly flight wise it is very under powered on the 2 cell set up and barley has enough thrust to stay airborne,will do rolls but forget loops,also it does not like wind at all and get thrown around but this maybe to do with the lack of power again,3 cell is the only way to go with this if you want it to last

beto | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 18, 2013

ok otimo produto estou no aguardo me recomendaro

Mark | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jan 26, 2013

A cute little model. Mine arrived with slightly warped tailplane halves. Easily straightened and strengthened by cutting slots in the underside and inserting some flat carbon strip. Did the same on the wing to prevent flex. Hoping that the extra stiffness will make the model groove better. Fitted a dsm-x 6 CH. Rx and 2s 460 turnigy battery. Had to remove foam in the battery bay to get everything in. Cg was spot on with this set up

ReallyGrumpy | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Dec 14, 2012

Just received my Hawk from UK Warehouse. Please note that it now has NORMAL SIZE type servo plugs and not the Micro Molex type as described above. It also has servo wire extenders, not good in such a small space. The elevator works through snake/wires and the servo does not have enough power to overcome the friction, so I have installed a slightly larger servo. Having got a RX that is compatible with the micro plugs specifically for this model the size of the plugs and extension wires is a major spoiler. The receiver was ordered and included at the same time, no comment from HK, sad really that they make this type of error.

mightybubble | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Dec 01, 2012

Mine also arrived this morning with standard servo connectors. Lovely looking plane. But don't tell the wife coz I'm not supposed to see it till Christmas :). Could someone tell me if there is supposed to be something under the nose of this plane as mine has a small square slot?

  1. 1
  2. 2
  3. 3
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!