Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Remplacement 20 Amp Opto BL Speed ​​Controller pour DYS 250/320 Quadrirotor

Generating Links

Remplacement 20 Amp Opto BL Speed ​​Controller pour DYS 250/320 Quadrirotor

Prix:

Now save économisez 0,00 € 0,00 €

11,80 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9206000035-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Remplacement 20 Amp Opto BL Speed ​​Controller pour DYS 250/320 Quadrirotor

Spécifications:
Max actuel: 20 ampères
Tension d'entrée: 2 ~ 4S (7.4 ~ 14.8V)
Dimensions: 25x22x12mm
Poids: 4.3g

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Cezary | Acheteur vérifié

  • Overall
  • Quality
  • Value

Bought as DYS 250 glassfiber replacement

Oct 22, 2017

I bought it as DYS 250 glassfiber replacement. Original two of them had been burned off (I don't know why but probably not enough good electrical isolation of ironing pins). I bought this replacement and they are full compatible with DYS 250 originals. Little different comparing to the photo (no capacitor), which I threat as advantage - less mechanical problems. Probably they have different firmware, engine starts around 1150 PWM comparing to 1050 for original. Anyway everything good.

carl | Acheteur vérifié

  • Overall
  • Quality
  • Value

esc

Mar 28, 2017

NOT as shown in photo

Douglas | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 07, 2016

I ordered this to replace a burnt out esc on a DYS 320, and as others have said, it is definitely NOT compatible. The motor wired to it spun at only 2600 RPM whereas the others were at 5600 RPM. Not even remotely close! I doubt that even using 4 of these would work well, unless you put on bigger props, which wont fit. Why did they stop making the V1 one, and then replace it with something completely different? Who is designing this stuff and what testing are they doing? Worse yet, they STILL list it as compatible after all the complaints? Yet another instance of HK jerking customers around. I think I'm finished with hobbyking; everything they make is a one-off production, and in RC that is unacceptable. Not to mention the 2 month shipping time.

Andry | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 06, 2015

Value: For $9.52 each, I only bought 2 of these. Price wise, it's quite cheap. BUT the problem with stock is worrying. For now, I haven't used those spare ESCs, so let's hope HK will stock them again in the long run.
Quality: Being an opto ESC, it doesn't came with a tube cover. Also the design on the 320 made them need to be put on the body. While it looked protected under the frame, any debris or a little of water could made them short circuited in an instant.
Overall: I only bought this as a spare. When I have used them all, I'm thinking to change them to other ESC.

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!