Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

RMILEC TS4047 10CH 2.5W UHF Module w / récepteur (module de JR)

Generating Links

RMILEC TS4047 10CH 2.5W UHF Module w / récepteur (module de JR)

Prix:

Now save économisez 0,00 € 0,00 €

144,86 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
362000001
Livraison gratuite? Cliquez ici pour apprendre plus!

Le TS4047 10CH 2.5W Système Module UHF RMILEC offre le nec plus ultra dans la gamme pour votre modèle de FPV. Il peut être utilisé avec n'importe quel module émetteur de type JR. Ce forfait comprend le module émetteur TS4047 UHF, récepteur UHF RD4047P 10CH et tout le matériel nécessaire.

Inclus dans la boîte:
module émetteur TS4047 (style JR)
récepteur RD4047P 10CH
Antenne module émetteur
support d'antenne
Tous les matériels / fils conducteurs nécessaires


Caractéristiques
des modules TS4047:
Gamme de fréquences du matériel: 400MHz à 470MHz
Stabilité de fréquence: 2,5 ppm
Sortie filtre passe-bas: NONE
- Band 1
Gamme de fréquences: 415Mhz-445Mhz
Fréquence de l' étape: 480Khz
Channel: 70
- Band 2
Gamme de fréquences: 433.05MHz -434.79MHz
Fréquence de l' étape: 30Khz
Channel: 70
Faible Puissance de sortie: 30DB -31dB Peak (0.9W-1.2W)
Puissance de sortie élevée: 33dB -34 dB Peak (1.9W-2.5W)
Faible taux: 40Hz @ 10kbps
Haut débit: 66Hz @ 15Kbps
Interface RF Impédance: 50 Ohm
Tension d' alimentation: 8.4V à 16V
Protection contre l' inversion de la batterie: NONE
Logic Tension: 3-12V
Courant:
330mA / 520mA (@ 50 Ohms, 12V Tension d' alimentation)
250mA / 440mA (@ No-charge, 12V Tension d' alimentation)
950mA / 1.6A (circuit @RF court, 12V Tension
d' alimentation)
Température: 50 à 70 degrés Celsius


RD4047P Spécifications
du récepteur:
Gamme de fréquences: 400MHz à 470MHz
Sensibilité:
-112 DBM @ 0.1EBR (taux 40Hz Refresh) (taux bas 10kbps)
-111 DBM @ 0.1EBR (taux 50Hz Refresh)
-110 DBM @ 0.1EBR (taux 66Hz Refresh) (15Kbps à haut débit)
-108 DBM @ 0.1EBR (taux 90Hz Refresh)
-104 DBM @ 0.1EBR (taux 125Hz Refresh)
-104 DBM @ 0.1EBR (taux 166Hz Refresh)
-101 DBM @ 0.1EBR (taux 250Hz Refresh)
F / S condition de marche:> 0.99EBR
Gain d' antenne: 2.15DBM
- Mode de taux bas
Taux de rafraîchissement: 40Hz
Taux Hopping: 40Hz
Cycle Hopping: 13Hz
Recover time: 77mS
- Mode haut débit
Taux de rafraîchissement: 66Hz
Taux Hopping: 66Hz
Cycle Hopping: 22Hz
Recover time: 45ms
Temps de réponse: 4ms à 25ms
PWM Précision de sortie: 0.5uS étape ERROR <20ppm
PWM Plage de sortie: 0,5ms-2.5ms
Cycle de sortie PWM: 55Hz @Normal Mode / Mode 192Hz @Fast
PPM Précision de sortie: 0.5uS étape ERROR <20ppm
PPM Plage de sortie: 0,5ms-2.5ms Chaque canal
PPM cycle de sortie:
50Hz @ Mode & 1ms normal 2ms sortie
42Hz en mode & 0.5ms 50Hz @Normal à 2.5ms sortie
50Hz en mode & 1ms 83Hz @Fast 2ms sortie
42Hz en mode & 0.5ms 125Hz @Fast à 2.5ms
PPM largeur d'impulsion de synchronisation:
4ms à 16 ms Réglage automatique / 4ms en mode @Fast immuable mode @Normal
Plage de sortie RSSI: 0-3.3V (signal RF faible <0.8V)
Recommander Tension d' alimentation: 3.5V à 8.4V
Tension d'arrêt: 3 V
Tension de dommages:> 15V
Tension de claquage inverse:> 15V
Les ports de sortie tension de tenue:> 12V
Normal: <60mA
Température de fonctionnement: -40 à +80 ° C
Basse fréquence Alimentation filtre de bruit: Inclure
Haute fréquence filtre de bruit: Inclure


Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Alberto Romero | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 10, 2014

I really recommend this product, for me have work great, I had flown for more than 15kms away with 70-80pcnt RSSI. Don't listen what the other people say about this product, much of them haven't even used. 100pcnt recommendable.
IMPORTANT: there is many information and very useful upgrades in the internet, in the rcgroups RMILEC thread, like dipole antennas and other things, do it.

pilotoheavy | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jul 22, 2013

el tinc fa 6mesos i cap problema, fuciona molt be. cap pega a part del manual que no l'entenc gaire. pero lo basic funciona be. ficat amb una turnigy .9xr. un video de 1,2mhz i un raptor. cap perdua de senyal i cap problema.

danforce1 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 12, 2013

The nicest part about the RMILEC system is how nice the module fits in the JR radio. The system is also very easy to set up & bind. I have about 15 medium range flights on this system with no problems. I tested system with a spectrum analyzer & I found the 2nd harmonics to be in the 1.2 ghz range & it was very strong. Even with filters I would be afraid to use 1.2 ghz for video. The other thing that disapointed me was the freq. hopping was much less impressive than described! I tested 3 times with analyzer & it would only hop to 3 different channels. In short, very affordable system but I would steer clear of urban areas & don't use 1.2 or 1.3 ghz vid tx with this system. Overall good value if used properly! I also got 4 miles on ground radio range test.

Panos | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 24, 2013

Hi guys!
I bought one 4 months ago and i am very happy with it!The only problem is that the module overheats and that is making me nervous.I found a sale in ebay with an aftermarket aluminum backplate i order one i put it on and now it runs cool!
Very satisfied!
Here is the ebay link

http://www.ebay.com/itm/251248653104?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Chris | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 13, 2012

absolutely brilliant for the price. I have been 2.2km away from "launch" with this system controlling my Bixler 2, see my video in the videos section of this listing.

No glitches, no lockouts and it was a breeze to bind and re-bind. setting fail safe was trail and error but a bit of googleing sorted me out. Could do with having the fail safe procedure in the manual.

all in all, great bit of kit, and this JR version fits into my Turnigy 9x with no modifications whatsoever.

ANGEL | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 11, 2012

Alguien sabe, como se configura el F/S ???
En el manual no pone nada.
El TX, tiene tres interruptores,tampoco pone nada en el manual, alguien sabe algo.

__Giba | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 30, 2012

Muito bom recomendo. Funciona muito bem com radio turnigy 9x
s precisa tirar a antena de 2.4. facil de bindar e com bastante alcance.
Ja voei a 4km sem ruidos. O f/S funciona muito bem mas no pode esquecer de habilitar a chave no modulo.

Anthony | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 04, 2012

This system works very well. I have a couple of pointers for anyone wanting to try it. 1) Always keep the rx antennas at 90 degress to each other, one vertical and one horizontal. 2)Keep the tx antenna vertical 3) dont sit too close to your video reciever with the tx as it will affect the video quality 4)Bind the rx with all equipment switched on vtx etc.



Good sytem and good price - nice one !

Craig | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Oct 01, 2012

Everyone is going to be disappointed when they find out that you can't use all ten channels without a ppm encoder board. You only have 8 usable channels as it comes from HK. Come on HK do your homework first. Where is the manual?

Atlantis222 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 06, 2012

This team of RX, TX is realmetne sensancional, I've flown over 4 km and only 20 meters from the ground and never any problems, I have it mounted on Turnigy 9x with fantastic software ER9x.

  1. 1
  2. 2
Fichiers clients
module Download [118]
No File Name Download [2370]
Simple Manual Download [2370]
No File Name Download [1695]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!