Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

ROKAF T-50 70mm EDF Jet (KIT)

Generating Links

ROKAF T-50 70mm EDF Jet (KIT)

Prix:

Now save économisez 0,00 € 0,00 €

96,26 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
T-50 KIT Gold
Livraison gratuite? Cliquez ici pour apprendre plus!

Vous cherchez quelque chose de différent dans un foamie EDF? Puis le 70mm Jet ROKAF T-50 est pour vous! Fini dans le schéma de couleurs de force République de Corée Air avec une grande attention aux détails du ROKAF T-50 a quelques tours il est manches. Le détail de cabine d'échelle est motorisé et peut être ouvert ou fermé en utilisant un canal de secours sur votre émetteur! Le système de rétraction inclus a également des portes fonctionnelles qui ferment complètement une fois les escamote sont arrimés. Tous les circuits de commande et le matériel sont inclus pour la verrière et se rétracte avec ce kit.

L'unité 70mm EDF inclus nécessite un 28 Taille EDF Motor autour de 2650kv et un 2200mah Lipo 4s est recommandé. Une sélection des armements sont également inclus dans le kit pour vous permettre de personnaliser l'apparence de votre jet. Vous aurez également besoin de cinq 9gram servos un 45Amp ou supérieur ESC et votre propre émetteur et le récepteur 6 canaux (Tx / Rx)

Spécification:
Envergure: 820mm
Longueur: 1050mm
Poids: 1200g
Moteur: 28 Taille EDF Brushless 2650kv (obligatoire)
EDF Unité: 70mm
ESC: 45A (obligatoire)
Batterie: 4s 14.8V 2200mah Lipo (obligatoire)
Compartiment de la batterie: 120 x 33 x32mm (MAX)
Servo: 5 x 9g (obligatoire)

Obligatoire:
ESC: 45A
Servo: 5 x 9g
Votre TX & RX (6 canaux minimum)
14.8v 2200mah 4s Lipoh batterie lipo

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Thomas | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 29, 2011

You vil need a, servo revers for one of the elevator servos.

And the motor in the combo recomendation(Turnegi 2226) does not fit the fan as it is 29mm and the fan is for 28mm!!

The plane it self looks nice, but seems a bit on the havy side for this fan!

pejay | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 03, 2011

Tested the fan unit. I use the recommended HK2839EDF Outrunner 2800 kV and 4 cell 2.200 mAh Turnigy 20-30C. I held the fan in my hand which is not ideal since when pressing the fan housing it becomes oval and the fan blades touch the wall. But anyhow, balance on fan blade unit was better than most plastic fans I have and power is fantastic. Could hardly hold it at 400 Watt which was not max speed. So I am sure this fan set up is more than sufficient and will rocket the plane. The fan is fitted to the 4 mm motor shaft with a collet chuck and it fits very well.

pejay | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 03, 2011

Just received the plane and it is truly fantastic. Very beautiful. Manual of course stinks so it took some time to figure out how to activate the servos so you can open up the canopy. There is an external battery connector at the underside of the body. You need to connect this and then plug in the servo leads to a servo tester. Channel 6 is for the retracts and channel 5 is for the canopy. The retracts and canopy servos are great - only these items are woth the price of the whole plane. A really fantastic low price. Can't wait to put it together and do the maiden flight. And by the way, fan seems to be of good quality but haven't tested it yet. Hope the blade has OK balance. But this plane can also fit the EPF fan sold here. I may use this instead. Will let you know.

ernie69_2000 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 21, 2011

I purchased this item from a company here is Oz. This one will come from the same manufacturer and I have to say it's fantastic. The guy complaining about the wing loading is wrong. At 1/4 throttle it just floats. I have the Black / Gold version which I'm sure they will bring out soon. The F-35 pilots are the perfect size. Worm gear retracts work perfect. Also, the canopy opens and closes so you can put the battery in it. C of G is recommended at 74-76mm from the start of the leading edge of the wing. When the Black one arrives I'll buy one from here just for spares. The price is great too. They cost around $300-350 Oz. Definately something a bit different to have at your field

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires