Prix total

0,00 €

Panier 0 Panier 0 Loading...

RotorStar ™ RS-2125MGC Hélicoptère Cyclique DS / MG Servo 2,6 kg / 0.09sec / 14,2 g

Generating Links

RotorStar ™ RS-2125MGC Hélicoptère Cyclique DS / MG Servo 2,6 kg / 0.09sec / 14,2 g

Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9068000001
Livraison gratuite? Cliquez ici pour apprendre plus!

Si vous êtes à la recherche pour le servo cyclique ultime pour votre 450 taille héli, nous avons juste la chose!

Le RotorStar RS-2125MGC est un micro / mini-servo numérique de la taille avec un geartrain métallique, moteur sans noyau et un temps de transit 0.09sec rapide. Ajoutez à cela, il est une excellente performance et dupé regards, et vous avez un servo exceptionnel pour le prix!

Parfait pour le HK450, Trex 450 et à peu près tout autre 450 taille héliski sur le marché aujourd'hui!

Spécifications:
Modèle: RS-2125MGC
Tension de fonctionnement: 4.8V / 6.0V
Vitesse de fonctionnement: 0,12 sec.60 ° / 0.09 ° sec.60
Stall Couple: 2.2kg.cm / 2.6Kg.cm
Frequence de travail: 1520μs / 333hz
Taille: 22.8x12x25.6mm
Poids: 14,2 g
Moteur: Coreless type
Roulement à billes: Oui
Boîte de vitesses: Metal Gears
Fil de connecteur: 180mm
Branchez: JR

  • Servo Couple ( kg ) ( min . 0,01 kg ) 2.60
  • Servo Vitesse ( Sec / 60deg ) 0.09
  • Servo A (mm) 29.00
  • Servo B ( mm ) 23.00
  • Servo C ( mm ) 26.00
  • Servo D (mm) 12.00
  • Servo E ( mm ) 33.00
  • Servo F ( mm) 17.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

frankyboy | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 17, 2016

super servo toutes en metal tres rapide .spcialement dvelopp pour les rotor flybarless.s'instale tres facilement sur hlicoptre de grosseur 400 ou 450 moi je les ai instaler sur une hk 450 et ils sont sur la king cochemerci hobbyking!!

Hamlett | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 29, 2015

You can see the quality all round a fine servo which I could use them on all my models.

Autotechnica | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 18, 2015

I bought this as a replacement for a 450 servo that went bad. The bad one was this same servo. There was tiny piece of metal shaving from the gear that got jammed causing the servo to overheat and cause a short. My 3GX controller kept resetting and causing a crash. I opened the servo up, cleaned it and now it functions properly. Even though these servos work well and are pretty cheap given their performance, I would open up all the servos, clean the gears, re-grease and make sure they run smooth with no binding or too much friction. Otherwise, you can't beat the price. They are as good as align servos, but because of the price I guess quality control sometimes is affected. No big deal, just check the gears before you install them.

Dolfie | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 09, 2015

I bought these for the swash of my 450 what a difference no more rocking from side to side. I had the HK 922MG they did not do the job. There is very little play in the gears.

Log123Log | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Sep 05, 2014

Good value for money.

Elevator servo on my 450 began to jitter after 200 flights, replaced it.
Gears are ok. Heli had some lighter crashes, so it's OK!

Overall a good servo. Will order a new spare one.

| Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 08, 2014

Perfect, good product and cheap!

closedsink | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jul 08, 2014

These were great at first, but after maybe 25 flights on my 450 (used them for cyclics), they all developed the same weird behavior. When moving from endpoint to endpoint, they would change speed when crossing through the center point. All 3 servos did this. This resulted in control problems with the heli. They were not crashed. I took them apart, but gears all look fine. I suspect an issue with the pots. Won't be buying these again.

Ben | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Jun 26, 2014

These are truly excellent servos. Very quick response time even at 4.8 volts, loads of power and holding torque, best servos I've ever purchased. Using them as an elevator servo for a 180 degree rotation all-flying stabiliser on a LeFish glider, and also as a tail servo on a tricopter using the Rotorbits tail mechanism. Both applications work really well. Highly recommended.

Atoniollo | Acheteur vérifié

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 29, 2014

Servo bom e rapido... Porem com engrenagens muito ruins... o meu 450 teve uma micro lenha. so deitou e la se foi as engrenagens... e o pior nao tem engrenagens a venda...

vincent | Acheteur vérifié

  • Quality
  • Value
  • Overall

Customer Rated

Feb 21, 2014

I use this on the gaui X2 as cyclic servos. So far, the gear slop is fine. The servo height is lower than the regular size which is good for my application. They work fine so far. I m happy with it.

Fichiers clients
rs-2125mgc 450 dfc Download [272]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!