New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

RS540-35T brossé moteur

RS540-35T brossé moteur

Discontinued Product

Please continue searching for a similar product.
Poids
243 g
SKU:
9368000063-0
WANT FREE SHIPPING? Click here to find out more!

Le moteur de RS540-35T brossé est un, pas de solution geat non-sens pour alimenter votre voiture ou en bateau.
Doit être utilisé avec un brossée ESC approprié (voir articles connexes ci-dessous.)

Caractéristiques:
• Brosses remplaçables
• est livré pré-monté avec des condensateurs pour aider à éliminer les interférences radio indésirables.

Spécifications:
RPM: 12500 /7.2V à vide
Aucun courant de charge: 1.8A
Taille de l' arbre: 3,175
Poids: 162g
Dimensions: 36 x 53mm

  • UGS 9368000063-0
  • Brand -
  • Poids (g) 243.00
  • Longueur 105.00
  • Largeur 45.00
  • la taille 75.00
  • Kv ( rpm / v) 1736.00
  • Max Current (A) 0.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 0.00
  • (W ) -
  • Arbre A ( mm ) 3.18
  • Longueur B ( mm ) 53.00
  • Diamètre C ( mm ) 36.00
  • Longueur Can D ( mm ) 0.00
  • Longueur totale E ( mm ) 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The motor looks nice, specs are nice, price is OK.

Received it a couple of days ago, went into my Vattera TH. Before I had Hackmoto 45t in, wanted some more speed from it.
Hackmoto 45t was a bit more expensive, no condensers, no wires.

So, HK prepared motor to be usable out of the box. I did a break-in procedure on low RPM in water. Water got black in 5 minutes...

Opened the motor and found out that brushes are 30pcnt shorter than competitor, made only of graphite (not copper/graphite sinter mix)

Housing for brushes made of nickel plated steel opposed to copper made from Hackmoto, so lower conductivity, lower heat conductivity from brushes, all contributing to shorter lifetime.

Main shaft is ball bearing and runs quiet.

It also handled 3S until now, a bit hot.

OK for price
OK for quality
OK for value.

Could be worse, could be better. Your choice what works out for you best ;-)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The motor looks nice, specs are nice, price is OK.

Received it a couple of days ago, went into my Vattera TH. Before I had Hackmoto 45t in, wanted some more speed from it.
Hackmoto 45t was a bit more expensive, no condensers, no wires.

So, HK prepared motor to be usable out of the box. I did a break-in procedure on low RPM in water. Water got black in 5 minutes...

Opened the motor and found out that brushes are 30pcnt shorter than competitor, made only of graphite (not copper/graphite sinter mix)

Housing for brushes made of nickel plated steel opposed to copper made from Hackmoto, so lower conductivity, lower heat conductivity from brushes, all contributing to shorter lifetime.

Main shaft is ball bearing and runs quiet.

It also handled 3S until now, a bit hot.

OK for price
OK for quality
OK for value.

Could be worse, could be better. Your choice what works out for you best ;-)

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save