Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

RX3S OrangeRx 3-Axis Vol Stabilisateur

Generating Links

RX3S OrangeRx 3-Axis Vol Stabilisateur

Prix:

Now save économisez 0,00 € 0,00 €

14,53 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9171000102
Livraison gratuite? Cliquez ici pour apprendre plus!

Utilisant une seule haute précision 3 axes MEMS gyroscope, le stabilisateur de vol OrangeRx 3-Axis est capable de stabiliser un vol sur à peu près tous les avions à voilure fixe! Il offre une stabilité supplémentaire en corrigeant automatiquement les canaux ailerons, profondeur et de direction en vol. Cela compense les changements non désirés dans l'attitude de l'avion en raison de vent et d'autres facteurs. En bref, il rend votre avion beaucoup plus stable en vol!

Le OrangeRx 3 axes de vol Stabilisateur est idéal pour ceux qui ont tendance à voler dans des conditions venteuses, car il va compenser les rafales de vent qui devraient normalement pousser votre modèle autour. Il est aussi un complément idéal à votre modèle de FPV favori pour le garder sur le droit et de niveau pendant le vol.

Cet appareil est très simple à installer et à utiliser. Les réglages de gain réglables sont pré-réglés à 50% offrant une stabilisation légère. Vous pouvez facilement ajuster le gain pour chaque canal comme souhaité pour augmenter ou diminuer la compensation pour le canal respectif (AIL, ELE, RUD).

Parce que nous concevons, testons et fabriquons ces unités complètement en interne (de 3D / 2D de dessin pour les matériaux d'approvisionnement, assemblage final, etc.), nous pouvons contrôler complètement la production et d'assurer la cohérence du produit de la conception à l'expédition du produit à vous. En outre, la suppression des intermédiaires hommes a voulu dire que nous pouvons conduire une meilleure valeur sur le marché et de détail de ces unités à l'usine (nos) prix!

Caractéristiques:
Capable de stabiliser vol sur environ un aéronef à voilure fixe seulement
Prise en charge de vol 3D sans porter atteinte à la stabilité
réglage du gain du gyroscope indépendant pour les ailerons, la profondeur et le gouvernail
gyro-à accès facile inverseurs sur le devant de l'unité
Design compact et léger

Spécifications:
Taille: 51x32x14mm
Poids: 14g
IC: Atmega168PA
Gyro: 3-Axis MEMS
Tension d'entrée: 4.8-6.0V
Interface AVR: Standard 6 broches
Signal du récepteur: 1520us
Signal Servo: 1520us

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Foxyy | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 17, 2013

Great gyro, cheaper than buying 3 individual gyros and works better. I haven't had any flutter with it unlike some other gyros. It is very easy to set up using the pots. I mounted it on a gyro pad to reduce vibrations.

WayToo | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 06, 2013

This is the only Hobby King product I have ever given a 5 crown rating. I bought three of these because the price was good but i was very surprised at how well they worked. I put the first one in a Bixler for experimental purposes and found that once you get it set up correctly the airplane becomes almost unconditionally stable in any wind. It does take a little time and effort to adjust the gain settings and they are not the same. I have more gain on the rudder than the ailerons and a bit more still on the elevator but when I put the Bixler in level flight it will maintain level flight. These are not an auto pilot but they actually work and are very good if you fly in wind the way I do. Thumbs up.

Bill | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Feb 05, 2013

Excellent value, have 6 of these, some I am useing the 5v bec in the speed controllers and 2 i am using them coupled direct to a zippy Life 1100ma 6.6v rx batt, i do not know the voltage tolerances but presumed they would expect you could run them in conjunction with their own range of receivers, have had over 20 fiights on this set up and it has performed faultlessly, certainly makes you look a better pilot than what you actually are, one thing i know is when most have packed up because of windy conditions i am able to keep flying and i am only a very average pilot, only time will tell if i am running too high a voltage with the 6.6 volt but until then i am having alot of fun

Emmanuel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 27, 2012

I never imagined flying in strong winds but my friend encouraged me to try. Not a pleasant experience. I bought this stabilizer to aid my flights. Initially i almost crashed had no clue how it worked. Now i have a good understanding and fly in very strong winds with hands off the radio. Cross wind landings are fun, crabbed all the way with hands off the radio and even touch down crabbed...lol

Just change the attitudes and it holds. I mostly use rudder and elevator and the plane flies fine.

Only thing bothering me was during no wind days had to manually disconnect the stabilizer else not fun. But with the V2 this is also resolved, already ordered the day it came in stock. Just waiting for it to come.

Dan | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 14, 2012

I bought 2 and I'm impressed by the design. One of the dip switches didn't work on the rudder, so I put that one in my little beater jet, the other one works fine. I need a few more and see there is a V2 for 3 dollars more, I think I will try the new one and a megapirate flight controller for my FPV. I have also use head lock gyro's with real time gain but you need 3 to do the same job....you do the math, lol.

Yaroslav07b | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 13, 2012

This is a great product i highly recomend this for your plane

s.l.oliver | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 09, 2012

The stabilizer is quite easy to install and logical to use. However, i am Not Super happy with the single aileron channel. There are ways to use it - but I do not like it !

Emmanuel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 06, 2012

I tried it on my supercub LP with park 480 in winds 20-25 knots. It was fun. Initially took a while to get the hang of it but after that its been fun fun fun... I do not use aileron option and use only rudder (90pcnt gain) & elevator (75pcnt). Just set your attitude and the plane stays there. I do my approach in strong winds without even touching the controls. Its so much fun. Now i have ordered the newer model with remote option to switch it off.

Ben | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 01, 2012

While I wish there was more on HK's website about the technical aspects of this flight stabilizer, I have to admit that it is great in the wind. I was able to float my Bixler in 40 mph winds and thanks to this stabilizer, I had to do very little inputs on my transmitter.

Does a good job for aerial photography, the main reason I bought it. Would be 5 crowns if more documentation was available.

vargasesteban | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Nov 29, 2012

Very nice product , be careful with the gain it is very sensitive and dont forget to order the extentions from fre receiver to this Gyro
they are MALE TO MALE http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=21758

Fichiers clients
ATmega168AP Download [608]
ITG3205 Download [1126]
No File Name Download [1447]
weight of board alone Download [741]
weight of case alone Download [649]
complete unit weight Download [782]
back of the board Download [769]
Orange Rx Manual R3 by MyCoolRC Download [145]
Larger Pic Download [127]
Larger Pic Download [109]
  1. 1
  2. 2
  3. 3
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires