Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Ryan STA OEB (bleu et jaune) PNF

Generating Links

Ryan STA OEB (bleu et jaune) PNF

Prix:

Now save économisez 0,00 € 0,00 €

77,08 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
RYAN-YB-PNP
Livraison gratuite? Cliquez ici pour apprendre plus!

Le Ryan STA est une icône de l'âge d'or de l'aviation, en remplaçant rapidement le attrayant, mais sous-alimenté Ryan ST (Sport formateur), la STA (Sport Entraîneur Voltige) a remporté le Championnat International Voltige 1937, conduisant à un intérêt immédiat de l'armée américaine , si vous êtes chanceux, vous pouvez toujours voir un de ces fantastiques avions regardant faire les circuits de spectacle aérien.

D'un autre côté, vous pourriez posséder et voler votre propre! Nous avons adoré le STA plug Ryan n Fly tant lors de l'essai qu'il est devenu un favori ferme avec toute l'équipe. Fabriqué à partir de dur EPO, nous avons vraiment mis ce modèle à l'épreuve et il est toujours aussi fort! détail d'échelle est impressionnante pour un modèle en mousse, les énormes pantalons de roue, fil de gréement, lignes de panneau et haubans donnent une impression d'un modèle plus grand, à la fois dans l'air et sur le sol.

Il y a beaucoup de puissance du moteur pré-équipée pour la voltige classiques comme décrochage tourne et des tonneaux, mais la zone généreuse de l'aile STA fait pour un modèle superbement équilibré, qui est tout aussi heureux voler à la vitesse de l'échelle. De même, la combinaison / surface de contrôle servo pré-équipée est parfaite, le résultat est l' un des modèles d' EPO plus doux que vous êtes probablement jamais à voler.

Spécifications:
Envergure: 1000mm
Longueur: 740mm
Voler Poids: 670g
Moteur: 3128 1100 kv
ESC: 30A w / BEC
Servo: 9g x 4
4 canaux

Comprend:
Brushless Motor, ESC et Servos
Hardware (barres de contrôle, de cornes, etc.)
Instruction complète Livre Photo

A besoin:
Your Own 4ch ~ 6ch TX / RX
Batterie 1300mAh 3s Lipoly

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Fratlight | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 19, 2013

C'est un bon appareil, mais il faut dj avoir un certains niveau de pilotage sans pour autant tre expert. L'avantage c'est qu'il n'y a rien de coll, tout est viss donc facile dmonter et transporter si besoin dans sa boite d'origine. Aussi il est trs rsistant mais il faut sceller les fixations des haubans car ils peuvent se dtacher lors de figures ou d'atterrissages forcs ! j'ai tout simplement mis un point de colle thermo sur certaines fixations et sur d'autres j'ai pinc les petits crochets mtalliques. Bons vols tous

Bill | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 04, 2013

Plane went together as I expected for a Hobby King kit. Would be much better it manual was as well done as the plane. The one fault I found was that the flap servos were not done properly. Both have to be installed in the same direction so the flaps do not act like ail. I installed a 1300 bat. and the cg worked out fine. Had 2 false start takeoffs but on third try I got it airborne. Did just a short flight to get the to see how it felt and check out the flaps, which I had set for just a short throw. Landed pretty good on a narrow street will add in a little more flap bed fore the next flight.I am being careful as I have not flown much in the past year. I replaced the flying wires with 24 ga bead wire.which I caonnected to the springs and streached the springs a bit so they ring a bit when you hit them. they will not fall off. Over all I am very happy with the Ryan.

kiel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jan 27, 2013

This is a great little plane. I received mine yesterday, built it in 30 minutes, swapped connectors and was ready to fly. I love the detail on this plane, although it comes pilotless. The rivets are raised and the tail, wings, and gear are Al stabilized with working springs and cables. All around a great plane.

Now on to the first flight. I first trimmed everything on the ground and plugged a 1500mha battery in place. When I began take off with my rates at full and expo off the plane was VERY pitchy and sensitive. I took the plane to 300-400 feet and trimmed very little. After a little elevator and aileron adjustment I was set. I flipped my expo to 40 and took my rates to 70 and she was set. I flew for about 7 minutes and brought her in. This plane needs most all of you attention but once level will stay there. She landed great and needed no additional attention for the second go around.

All in all I am super happy with this plane and I think it may be my new favorite little flyer...for now at least.

ahmadIrfan | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 06, 2012

Very good plane for 60 dollars (in sale) havent flown it yet but quality and finish seems nice.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 19, 2012

I receive this product but the manual isnt on the package!

Reid | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Jun 16, 2012

Good airplane for intermediate skilled flyers. A little heavy, but adding the flaps is easy and provides really good low speed characteristics. I leave them down most of the time. Performs well during all basic aerobatics Plenty of power with the stock motor. This is a tough little bird, mine having survived a midair with a much heavier aircraft with only minor damage. Ground handling is good but can be tippy in a crosswind. I removed the heavy nose weight and relocated the esc under the cowl, just behind the firewall, and moved the battery all the way forward for balance. Nice plane!

Robert | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 29, 2011

I have flown my STA and can now give a rundown on it.



The plane flies really well - very stable and forgiving. At the same time, it will do all the standard aerobatics like loops, rolls and hammerheads. The only problems with the plane are......

a) the main undercarriage are rather close together (scale appearance) which makes the plane rather squirrely on take off and a bit hard to land. I will have to refine my techniques a bit.

b) the plance is a little slow. It needs to fly on about 4/4 to max power to stay in the air. I am not sure if this is an underpower or underpropeller situation.

All in all, I am very pleased with my Ryan. It is a cool scale model which looks great in the air and is very nice to fly.

Robert | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 20, 2011

So far, my STA has arrived and I have looked it over but not actually built it. All the components are nicely detailed and appear to be made from a very high quality EPO. All the fittings (such as the wheel boots and the strut-wires) look cool. I intend to build this over the Xmas/New Year break. I will do a further review after I have flown it.

yossi | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 25, 2011

Very beautiful model aircraft and upgraded scaile items but flying really bad and not relaxed, you have to fly it fast and not in the wind, a little wind blowing it out of control

maxim75 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 10, 2011

the plane is goodlooking , fly good and it's easy also for not so expert pilot , motor have enough power for normal flight but for acro flight is better to update

  1. 1
  2. 2
Fichiers clients
RYAN STAR @ thailand Download [70]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires