S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Sabre F-86 Mig tueur 1420mm EPS kit de mousse (bleu foncé)

Sabre F-86 Mig tueur 1420mm EPS kit de mousse (bleu foncé)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
5749 g
SKU:
D005
Description
du
Le Sabre F-86 est un monstre d'un foamie avec son 1.42mtr envergure. Un modèle de mousse bien formé et détaillé. Inclus dans le forfait est le système EDF (arbre 5mm) et le train d'atterrissage avec les roues. (pas montré)
performances de vol pour ce grand oiseau est incroyable avec un excellent vol straight-up et les performances de vol lent des thats tellement prévisible que vous ne serez pas friser vos orteils sur le premier palier.
Vous aurez besoin d'un 80A + esc et 1800Kv (B36 ou 540 taille) du moteur Inrunner.
Le kit comprend simple et facile à suivre les instructions.
Spec;
Matériel: Styrofoam (EPS)
Envergure: 1420mm (56 ")
Longueur: 1410mm
Wing Zone: 37dm sq.
Hauteur: 598mm
Airfoil: RG-14
Poids: 605g (corps)
Poids en vol: 2100g (avec le train d'atterrissage de suspension)

Obligatoire;
Moteur: 1800kv (Shaft dia 5mm)
ESC: 80A w / BEC
Batterie: Li-Po, 18.5v (5 cellules), 3200mAh, 20C
Servos, cordons de servo etc.
* Note, cet avion est livré dans une très grande boîte. Il doit être envoyé EMS Express seulement.

Un journal de génération en français peut être trouvé ici:
http://forum.modelisme.com/t126275-flyfly-f-86-sabre-92mm-edf-jet.html

** Note: La couleur du plan est maintenant bleu foncé et la photo sera mis à jour bientôt.

Product
Specifications

Informations supplémentaires

  • Référence:
    D005
  • Brand:
    Non
  • Poids (g)
    5749.00
  • Longueur
    920.00
  • Largeur:
    335.00
  • Taille:
    460.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this aircraft with great expectations and went the extra distance and purchased the pneumatic landing gear, built the kit over a year and coated with a single layer of f/g and clear coated the decals to the body. Was a proud of the finished item with every control surface tested & hinged, servo lines and pneumatic line run a laced up in a neat. However assembly had a few problems along the way requiring attention.
1)pneumatic valve and pistons never worked correctly needed to purchase a low voltage control solenoid and replace the o'rings for the landing gear to get somewhat reliable operation.
2) large gaps between the wing mounting and the body had to fill with cut & glued foam.
3) canopy plastic brittle and crapy manufactured my own from shirt boxes glued by acetone
4)lots of parts that need attention cause they didn't fit and align properly.
5)COG balance woy off. need to ad weight (which i hate doing, Why does hobby king always get this so wrong . Please test you products please!)
6) flys great and looks the fine in the sky. However definitely not a beginners kit
7) the exhaust clear tube internal to the main body only lasted 3 flights before cracking up and fragments flying out the rear ( and given it was CA securely in place and analysing the fragments suggest that this is inappropriate material to brittle for the purpose. (suggest you don't use the stuff that com
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
needs a bit of work. i have fibreglassed the fuse and wings. i have also fitted carbon spars to the wings. i used 4 x 6mmx750mm square spars. great size and really impressive.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
super jet, vol comme un trainer,(ne pas couper les gaz!!!!)

a besoin de 6S (22volts) pour decoller du sol mais surtout, d'un gros travail de renfort au niveau de l'aile (joncs carbone)et fibre de verre,et aussi a l'avant dans l'emboitement....sinon c'est la rupture de l'aile.

j'ai adapte la drive (3axes)pour le vent de travers

la turbine HK30281 est parfaite,le train est fixe pour l'instant STT-01

http://www.aerosquare.com/content/view/99/42/lang,fr/
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ok if this double posts I'm sorry. I'm disappointed with the Navy Blue paint job. Looks like my 4 year old granddaughter finger painted it. I'm not kidding It's that sloppy."Got'a Love that kindergardener's refrigerator art work" First off It was supposed to be white, But I guess HobbyKing got what they could get. Don't get me wrong HobbyKing Emailed me and asked me if I would accept the change from white to blue. The manufacture, FlyFly makes 3 color combination's. silver blue and white. The silver is the Best Color "That's My opinion" So if you up to a lot of cosmetics, this kit is for you. I have the FlyFly Mirage 2000 So I knew what to expect. Funky instruction's and weird materials. But all and all a very complete.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this FlyFly 90mm EDF EPS F-86 from elsewhere.

Minor foam cutting was needed to fit two packs of Turnigy 5S 3000mAh 20C. (Total: 10S 3000mAh)

I used a Wemotec Midi Pro, with HET 600-43 motor, with Turnigy Sentilon 100A HV ESC.

Pulls 50A static.

Did not install an landing gear.

Partially glassed with Z-Poxy glassing resin.

Photos: http://www.rcgroups.com/forums/showpost.php?p=13795849&postcount=1621

Needs a good throw to handlaunch.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this one Aug 2010, the white Japanese scheme is horrible! But I bought it for painting a Canadian scheme so it will paint over white very well, received it promptly and without damage, very nice kit! highly recommended if you want to paint it orif you like Japanese Air Force scheme!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
received jet looks great can't wait to assemble 5-1-2010
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
gran avion, con edf de wemotec 90mm y motor het 600-37-2 bateria turnigy 6s 3600mh 30c buen entrenador y de vuelo noble, no olvidar reforzar el ala con varilla de carbono es importante si no quieres sufrir rotura del ala
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I PURCHASED MINE AND IT ARRIVED IN 6 DAYS USA

IT REALLY A VERY NICE PLANE , I CANT BELEIVE THE LANDING GEAR IS INCLUDED ( IT'S TERIFFIC ) I 'M INSTALLING A HET 600-32 MOTOR , A HOBBY WING PENTIOM 100A ESC. USING A 5 CELL 4000A BATTERY. IT GOT HERE WITHOUT A SCRATCH ON IT. VERY IMPRESSED .. DIRECTIONS GOOD. ASSEMBLED IN ONE EVENING. I'VE HAD 9 ORDERS FROM HOBBYKING AND NO PROBLEMS ..THANKS HOBBY KING JOHN T. OMAHA , NE. USA
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
un magnifico avion, con edf de wemotec 90mm y motor het 600-37-2 bateria turnigy 6s 4000mh, vuela sobre railes ideal para iniciarse en modelos EDF, permite aterrizajes lentos sin meter el ala.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.