S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Sbach 342 1000mm Balsa (ARF)

Sbach 342 1000mm Balsa (ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
2299 g
SKU:
Sbach-39in_EP

Combinez

et économisez plus
esc
battery
servo
motor
acc
Description
du

Le Sbach 342 n'a rien d'une sensation été depuis sa arrivée sur la scène de voltige, le masterpeice de Philip Steinbach parvient à combiner les lignes gracieuses encore agressives avec un look moderne, qui a attiré l'imagination des passionnés de l'aviation dans le monde entier. La performance est bien sûr, ce bord de coupe de voltige avion sont sur le point, et il est ironique que le Sbach 342 a été conçu spécifiquement pour imiter le modèle capacité de l'avion 3D.

Le HobbyKing Sbach 342 est un looker, aucun doute à ce sujet et plus vous regardez le détail le plus le facteur "wow" de ce modèle frappe vraiment la maison. La taille des surfaces de contrôle saisir votre attention tout de suite, cela est construit pour la voltige 3D / de précision, puis regarder le matériel, les tringles utilisant billes liens tout autour, tirez / tirez le gouvernail confirmer la première impression. L'étonnant, ultra construction de haute qualité donne stength combinée avec légèreté, une autre boîte de voltige de précision essentielle cochée!

Ce modèle a été superbement pensé et conçu, d'autres caractéristiques dignes d'une mention sont le composite / couche support moteur et sous-chariot de montage, le vaste kit de matériel qui est inclus, le capot en caoutchouc monté, le tube d'aile en fibre de carbone, la canopée fixé par un verrou et des aimants et ainsi de suite, l'HobbyKing Sbach 342 est une combinaison étonnante de détail à grande échelle, de fabrication de haute qualité, des composants de haute qualité et à l'extérieur et sur la performance.

Spécifications:
Envergure: 1000mm (39.4 ")
Longueur: 975mm (38.4 ")
Wing Zone: 19,41 dm2
Voler Poids: 600g ~ 650g
4 canaux

Comprend:
Tout le matériel
Plein Instructions Photo & CD Rom
Fiche Decal

A besoin:
Votre propre canal 4 à 6 canaux TX / RX
28mm 800kV ~ 1000kv Brushless Outrunner
20A ESC
4 x High Torque numérique Micro Servo de
1300mAh ~ 1600mAh 3s Lipoly

Product
Specifications

Informations supplémentaires

  • Référence:
    Sbach-39in_EP
  • Brand:
    Non communiqué
  • Capacité ( mAh )
    Non
  • Poids (g)
    2299.00
  • Longueur:
    790.00
  • Largeur:
    175.00
  • Taille
    280.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Schn gebautes Modell. Doppelt verpackt, gut gebgelt. Kleber ist ueberall da, wo er hingehoert. Zubehoer ist komplett und hochwertig. Aber es gibt auch Kritik.
Fluggewicht 600-650 Gramm ist sehr optimistisch. Mein Modell wiegt leer 650 Gramm!
Ist auch sehr Hecklastig. Ich habe ein neues Leitwerk gebaut (-30 Gramm) um den Schwehrpunkt annaehernd hin zu bekommen. Brauchte trotzdem noch 30 Gramm Blei unter der Motorhaube, damit der Schwehrpunkt auf 75 mm einstellbar ist. Mit meinen Setup, Hacker A20-12L EVO, Jeti Advance 30 Plus, 4 x 12 Gramm Servo, Empfaenger mit 13 Gramm und 3S 2200 mAh Akku, habe ich ein Fluggewicht von 1030 Gramm. ber die Flugeigenschaften kann ich noch nichts berichten. Warte auf besseres Wetter.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Estupenda terminacion y buenos accesorios.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello, I rode my sbach, and really it is very heavy syrup. so what i did changed the elevation and rudder to polystyrene (foan). Dai worked the flight. follow the link my facebook ::: http://www.facebook.com/photo.php?v=458598710830610&set=vb.100000414545761&type=2&theater
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
love this plane went together a breeze flies like on rails running e-flight power 10 out runner 2200 3s 50amp esc love it love it new favourite plane
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
With Turnigy 3536/6 motor, Turnigy 45a esc, 10x5prop and nanotech 3300mah 4s doing basic flying quite well. Having sooo much power and climbing up vertically fastly. Covering film/glue didn't like cold winter and now wrinkled slightly everywhere. Motor mount needed new holes for 36 size motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
es lindo a la vista, el entelado es pesimo, es muy pesado de cola, el motor recomendado no alcanza, no es un avion para 3d
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Plane is nice looking and flyes great. I had no issue with tail heavy as many reviwers have complained. Used a 36 size motor with 40A ESC mounted at front and a 2600 4 S battery pushed all the way up front, almost touching the motor. Balance was perfect - just a little elevator trim needed and plane flew great excpet my ESC failed resulting in a crash landing. Not too serious. The motor mount had to be modified a bit to fit motor and by the way the carbon fiber motor mount is not carbon fiber -only some kind of black fiber. Also landing gear is aluminum - not very strong so I changed to carbon fiber gear 125 mm bought here. Nice plane, truly price worthy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ok, after reading lots of reviews about how tail heavy this plane is and going into damage control after buying it, I can't say I'm unhappy. In fact, I'm pleasantly surprised. The build quality seems reasonable for the price but yes, it is a little tail heavy and heavy generally. My work around is to use a larger than normal size battery for this size plane and no problems. Slow handling is fine so not overloaded. It has had 2 successful flights with the only real issue being that the horiz stab is a little twisted so vertical lines are slightly skewed. I'll fix this so not worried too much. Generally, I am a happy buyer especially after the initial panic. The batteries I used are Hyperion 2500 3s, motor is a D2836 pushing a 10x5 prop. ESC is 30A hyperion, Servos are HXT 900. I get approx 9 minutes of aero flying on this. !NOTE: This is not a 3d machine! It tracks very well (other than tail twist), rolls are close to perfect and quite quick, inverted is very close to perfect straight. I will use this for park practice precision aeros. Thanks, and don't be too put off by the general tail heavy comments, fixable and useable without mods.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have bought this, very nice and beautiful plane but plz do not order any of the recommended motor for this, bcoz its a tail heavy model, I put it in Park-450 Turnigy motor and it was flying really sluggish, now i am putting in E-MAX GT2820/6 the heavy duty one hope it fly well on it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Oups! apart of heavy tail it got a huge wing loding!!! it's about 17.5 oz/sqf!!!!!! piece of rock!!!! it wount fly with this setup for sure!!!

Hobbyking just disappointed with this product!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Combinez

et économisez plus
esc
battery
servo
motor
acc

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.