Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

SCRATCH/DENT - Arkbird Autopilot System w/OSD V3.1028 (GPS/Altitude Hold/Auto-Level)

Generating Links

SCRATCH/DENT - Arkbird Autopilot System w/OSD V3.1028 (GPS/Altitude Hold/Auto-Level)

Prix:

Now save économisez 0,00 € 0,00 €

95,28 €
Expédié de:
  • USA
  • Global
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
SDAU00230
Livraison gratuite? Cliquez ici pour apprendre plus!

Item used in photo shoot only - Non AU Stock item. Appears to be complete and unused in original packaging

 

Warranty:
No warranty available for this item.
Please do not ask questions as the item will be sold out within 24hrs.
No backorders allowed.

 

Scratch & Dent items are sold as-is. What you see in the photo is what you will get.
Because HobbyKing loses money on each Scratch/Dent item sold we cannot offer warranty or answer questions on these products.

 

Item will be deactivated once a 0 stock level is reached.

 

Please see product Arkbird Autopilot System w/OSD V3.1028 (GPS/Altitude Hold/Auto-Level) for more details.

The Arkbird Autopilot System w/OSD is an all-in-one solution for your FPV model's navigation. This unit is loaded with features such as GPS waypoint flight, "Return to Home" functionality, auto-leveling, altitude hold and much more! It utilizes GPS, barometer and attitude sensors to stabilize/control your model's flight.

Worried about losing control of your FPV model when flying out of sight? With the Arkbird Autopilot System on-board there is no need to worry! The "Return to Home" function can be activated at any time to fly your model back to its take-off position and will be activated automatically in the event that your model flies out of RF range. Set a "fence area" so you don't fly outside defined boundaries.

The integrated OSD system provides you with all of the information you need during flight such as altitude, flying direction, home direction, roll angle, pitch angle and time since take-off just to name a few. This system also includes a current sensor with pre-installed XT60 power plugs so you can monitor your model's flight battery status via the OSD.

The Arkbird Autopilot System comes with everything you need to setup your FPV model for the ultimate in GPS based Autopilot flight. It features a "plug and play" design meaning there is no soldering or modification required to use. All power plugs and wire connections are pre-installed. 

Features:
• GPS, barometer and attitude sensors to stabilize/control your model's flight
• Integrated OSD functionality
• GPS based "Return to Home" functionality
• 4 point GPS waypoint flight
• "Cruise Flight" mode offering straight and level flight pattern holding
• Auto-leveling
• Set "fence area"
• Easy to setup and adjust

*Note:
 See user manual located under the "Files" tab below for full features/specification for this system.

Specs:
Arkbird Autopilot controller
Dimensions: 50x40x18mm
Weight: 30g

Gstar R-15E GPS module
Dimensions: 44x34x12mm 
Weight: 21g 

Includes:
Arkbird Autopilot System w/OSD
GPS module
Current sensor
All necessary connection cables

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!