New Items Actus Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

Signal Converter Module SBUS-PPM-PWM (S2PW)

Signal Converter Module SBUS-PPM-PWM (S2PW)

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

9,21 €
Statut:
En stock.
SKU:
333000011-0
WANT FREE SHIPPING? Click here to find out more!

Un appareil de haute précision grande pour la conversion du signal SBUS-PPM-PWM. Convertisseur de signal a été conçu pour permettre à l'utilisateur de convertir un signal d'entrée PWM en un signal PPM correspondant et la sortie du signal PPM SBUS ou encore convertir le signal d'entrée SBUS en un signal PPM, et le signal PWM correspondant.

Le signal d'entrée est automatiquement reconnu et le signal passe dans la bonne direction.

Caractéristiques:
• Le signal d'entrée de reconnaissance automatique
• Lorsque le signal d'entrée est SBUS vous pouvez passer la sortie de 1-8CH à 9-16CH avec interrupteur à bouton-poussoir

Spécifications:
Tension de fonctionnement: d'alimentation du récepteur (3.7 ~ 8.4V)
Courant de fonctionnement: <30mA
Taille: 29x26x10mm
Poids: 5.0g

Comprend:
1 X Signal Module Converter

  • UGS 333000011-0
  • Brand HobbyKing
  • Capacité ( mAh ) -
  • Poids 10.0000
  • Longueur 150.00
  • Packaging Width 15.00
  • la taille 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Excellent little piece. Used this to reduce the cabling on an Inside F5J glider, where it was built into the middle of the 6-servo wing, necessitating only one cable to go into the fuselage. No Manual is included, but it's pretty self-explanatory. Futaba users: make sure you connect it to an SBUS channel, not an SBUS2 channel. We've witnessed some servo jitter ("hiccups") with one of the three Units we purchased when used with a Futaba R7008 Receiver, but only on one of the unit's channels. Plugged the servo into another channel and all went well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent little piece. Used this to reduce the cabling on an Inside F5J glider, where it was built into the middle of the 6-servo wing, necessitating only one cable to go into the fuselage. No Manual is included, but it's pretty self-explanatory. Futaba users: make sure you connect it to an SBUS channel, not an SBUS2 channel. We've witnessed some servo jitter ("hiccups") with one of the three Units we purchased when used with a Futaba R7008 Receiver, but only on one of the unit's channels. Plugged the servo into another channel and all went well.

WORKS ON DJI D-BUS TOO!! FOR YOU FELLAS THAT USE LIGHTBRIDGE 1 WITH WOOKONG OR NAZA AND DONT HAVE FREE CHANNELS TO USE YOUR GIMBAL CONTROL AND SHUTTER!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WORKS ON DJI D-BUS TOO!! FOR YOU FELLAS THAT USE LIGHTBRIDGE 1 WITH WOOKONG OR NAZA AND DONT HAVE FREE CHANNELS TO USE YOUR GIMBAL CONTROL AND SHUTTER!!

BIG CORRECTION PREVIOUS POST. THE UNIT DOES DO PPM TO PWM.
The conversions are thus:
PPM in (Blue LED flashing once in short intervals) you get S-Bus out(ch10) and PWM out
PWM in (Blue LED flashing twice in short intervals) you get S-Bus out(ch10) and PPM out(ch9)
S-Bus in (Blue LED flashing three times in short intervals) you get PPM out(ch10) and PWM out
Works great.
The red LED OFF means the units PWM outputs are Ch1 to 8. The red LED ON means the units PWM outputs are Ch9 to 16. To toggle the red LED - hold down on the units tiny switch while applying power.
This unit works great.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

BIG CORRECTION PREVIOUS POST. THE UNIT DOES DO PPM TO PWM.
The conversions are thus:
PPM in (Blue LED flashing once in short intervals) you get S-Bus out(ch10) and PWM out
PWM in (Blue LED flashing twice in short intervals) you get S-Bus out(ch10) and PPM out(ch9)
S-Bus in (Blue LED flashing three times in short intervals) you get PPM out(ch10) and PWM out
Works great.
The red LED OFF means the units PWM outputs are Ch1 to 8. The red LED ON means the units PWM outputs are Ch9 to 16. To toggle the red LED - hold down on the units tiny switch while applying power.
This unit works great.

Great for converting S-Bus to PWM. Up to 16 channels. Disappointing to find it does not convert PPM to PWM. No instructions with the unit.
So here is a brief rundown on what the LEDs mean.
Red LED on means PWM is channels 9-16. Red LED off means PWM is channels 1-8. To switch the red LED on or off, you power up the unit while holding down the units tiny switch. Solid blue LED means no signal. Blue LED flashing twice in short intervals means PWM to S-Bus/PPM conversion. Blue LED flashing three times in short intervals means S-Bus to PWM conversion.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great for converting S-Bus to PWM. Up to 16 channels. Disappointing to find it does not convert PPM to PWM. No instructions with the unit.
So here is a brief rundown on what the LEDs mean.
Red LED on means PWM is channels 9-16. Red LED off means PWM is channels 1-8. To switch the red LED on or off, you power up the unit while holding down the units tiny switch. Solid blue LED means no signal. Blue LED flashing twice in short intervals means PWM to S-Bus/PPM conversion. Blue LED flashing three times in short intervals means S-Bus to PWM conversion.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking